Integration: `2025.w18`
Closes#953
See merge request oai/openairinterface5g!3413
* !3385 Add enc/dec lib for E1 Bearer Context Setup Failure
* !3410 Avoid segmentation fault when testing trigger reestablishment and there is no DRB[0] established
* !3411 Remove assert for SRI-PUSCH-PowerControl
* !3291 Improvements in handling UE context in gNB DU
* !3416 Signal gNB-DU config update CellStatus from DU to CU
* patch to fix memory leak on DRB_ToAddModList
* update phytest-timing thresholds
Signal gNB-DU config update CellStatus from DU to CU
Add the cell status to gNB-DU configuration update message, including
test. Use the gNB-DU configuration update to signal the cell status in
the stack.
This IE was not included in a previous refactoring round, but is at
least necessary to be decoded when interoperating with the OSC O-DU.
Improvements in handling UE context in gNB DU
The goal of this MR is to improve the handling of UE context in gNB DU.
To achieve this goal, the UE structure is created as soon as the gNB
receive a PRACH indication. At that stage the UE is placed in a new
structure containing UEs performing RA, untill RA is complete where it
is moved to the list of connected UEs. To simplify the code and to
improve the handling of initial procedures (see #751), DCI 10 and DCI 00
is used at every stage until the DU receives from CU the indication of
UE RRC reconfiguration being completed.
Remove assert for SRI-PUSCH-PowerControl
SRI-PUSCH-PowerControl is not implemented at this point but its enough
to warn about incorrect power control behavior rather than assert on the
configuration.
Closes#953
This is preparatory work to allow NSA-like modes to be used over F1 in
the future. Notably, it fills the F1 message for UE context setup with
GTP TEID, and fills additional information to "make the F1 encoder
happy" (fill in QFI etc). Also, provide some F1 fixes to make this work.
Remove stale UE connections, if relevant.
sdap_tun_read_thread needs to know if we are gNB/UE. Previously, we
passed this into the thread, but the next commit also needs to for
interface termination, where this info is not available. So, for noS1
mode, pass this in.
Add functionality to trigger the addition of a new RRC UE context (in
the CU) for NSA modes, using F1. This commit makes do-ra and phy-test
modes work. "True" NSA will work in the next commit, which also sends
the X2 addition request answer message.
Use the gNB-DU configuration update to signal the cell status in the
stack. At the DU, modify the code to always send this message --
previously, we only sent this message if a SIB1 update was necessary,
but now it's always, only including SIB1 updates if necessary.
At the CU, as we don't really have a use as of now, print the
information, but don't do anything with it.
Add enc/dec lib for E1 Bearer Context Setup Failure
This MR is adding:
- the enc/dec library
- unit test
- handler and callback in stack
For the E1 Bearer Context Setup Failure.
- rewrite add_UE_to_list() and rewrite remove_UE_from_list() to simplify
list handling
- return pointer from get_new_nr_ue_inst(); it's completely freed by
delete_nr_ue_data()
- have add_new_UE_RA() add UE context to access list; remove with
nr_release_ra_UE()
- have add_connected_nr_ue() only add UE to connected list; to move from
access to connected use transition_ra_connected_nr_ue(); remove with
mac_remove_nr_ue() as previously
- free memory on problems during RA
- add some documentation
- in NSA/HO: check for pre-configured RA process
- there are asserts in all functions to clarify when a UE has RA
In phy-test and do-ra modes, we will trigger a UE context creation after
F1 Setup (because the DU is ready), in a later commit. However, before
this commit, E1 is started after the gnb_app (which triggers F1 Setup).
E1 starts an (integrated) CU-UP; if the E1 Setup arrives after the F1
setup (which creates a UE context), then the E1 setup handler will drop
the newly created RRC context for a do-ra/phy-test mode.
Avoid/minimize this by starting E1 first, so that E1 setup is done
before F1 Setup is completed (this does not make sure the problem does
not happen, but lowers the risk of the above problem).
SRI-PUSCH-PowerControl is not implemented at this point but its enough
to warn about incorrect power control behavior rather than assert on the
configuration.
This commit does not introduce the callback on the CU-UP to trigger
a Bearer Context Setup Failure when the setup of the bearer context was unsuccessful.
This should be handled properly in the stack e.g. in e1_bearer_context_setup (a comment
in the code says "We assume all DRBs to setup have been setup successfully, so we always
send successful outcome in response and no failed DRBs")
Integration: `2025.w17`
Closes#947
See merge request oai/openairinterface5g!3403
* !3377 Fix all direct MAC memory leaks
* !3397 Fix for MIB/SIB gNB delay mechanism
* !3399 SIBs in DL slot check
* !3401 F1AP: Allocate gNB_DU_ID before storing ID
* !3380 Issue 947 and compilation improvements
* !3391 small bugfix for T tracer
* !3261 Add Bearer Context Modification Request/Response enc/dec lib and adopt in stack
* !3178 mod: refactor PHY multiplications
* !3382 Improve radio for Metanoia RU (and likely others)
* !3388 Update CN5G images tags to the latest release in all CI pipelines
* !3351 Fix ASN1 struct double free
* !3405 Fix for NR UE DLSCH decoding barrier in case of no feedback
* !3404 Polar: remove dead code and a wrong comment
Polar: remove dead code and a wrong comment
a file code duplicated and no more used a comment is wrong:
uint16_t x = INFINITY; is wrong, the gcc comment is true
uint16_t x= INFINITY; sets x=-32768 because it is truncature of 0x7FFFFF
add SIMD for the top lines when i run polartest
Fix for NR UE DLSCH decoding barrier in case of no feedback
In !3291 NTN CI RFsim test fails with the UE being stuck. After some
investigation, this seems to be caused by the scenario where there is no
feedback for DLSCH. In that case there is no need to wait for DLSCH
being completed before generating feedback (there is no feedback).
Fix ASN1 struct double free
When paging, RA and other SI have same PDCCH search space, we should
free the struct once and reset the other pointers to NULL.
Update CN5G images tags to the latest release in all CI pipelines
This MR is updating the tags of the CN5G docker images to the latest
release v2.1.9, for all CI pipelines.
Improve radio for Metanoia RU (and likely others)
We introduced a regression that lowered the achievable DL throughput
with at least the Metanoia RU (i.e., in the configuration and the UE
that we use). git bisect showed up one commit, which does not seem
necessary. We just revert this commit, as it improves the throughput and
does not seem to have a negative impact on performance.
Further, increase RLC buffers a bit. Limit 7.2 pipeline number of layers
to 2.
Guido Casati