- cmake version 3.12 defines libxml2 module; the default path is
/usr/share/cmake-3.<sub-version>/Modules/FindLibXml2.cmake
- OAI requires minimum cmake version 3.16
- RU IP address - to connect to RUs via netconf
- DU MAC address - for setting up the CU-planes on RU; not used in xran
- VLAN tag (*) - for setting up the CU-planes on RU; not used in xran
- DU keypair - for authentication when connecting to RU(s)
The parameters that RU-controller shall retreive from RU list of
capabilities:
- MTU
- compression
- RU MAC address
- PRACH offset (**)
(*) VLAN tag is not used in xran but an option is given in fh_config struct.
In my opinion, it is not a very suitable place, as it is needed for VFs.
Therefore, I moved it in the initialization part for M-plane purposes.
(**) PRACH offset shall be >= max(Ntx,Nrx), as per O-RAN CUS specification:
"The O-DU may decide to use same eAxC ID value to address endpoints on different O-RUs,
but eAxC ID values assigned to one O-RU must be unique within the O-RU’s endpoints of same direction."
=> however, LITEON supports flexible assignment of PRACH eAxC IDs, so
we made a workaround in the xran library to support PRACH eAxC IDs same
as PUSCH eAxC IDs.
Integration: `2025.w12`
Closes#920 and #915
See merge request oai/openairinterface5g!3325
* !3301 Remove unused NR UE PHY unit tests
* !3319 Disable EPS NAS security algorithms in 5GMM UE capabilities
* !3315 SCTP: avoid assert on partial SCTP message
* !3323 Fix long RACH regression
* !3311 Harmonize and update Frequency Range computation to the current values specified by the standard
* !3320 Miscelaneous improvements in PHY simulators
* !3286 Add support for ARM build pipeline
* !3308 remove ul_ch_estimates_time to save memory
* !3310 remove globale llr_layers to save memory, improve CPU, simplify code
* !3274 Add initial support for RedCap
* !3328 Fix ULSCH ID type to handle large max_nb_pusch values (ULSCH procedures)
* !3329 NR build improvements
* !3285 Update FHI 7.2 documentation, minor code cleanup
Update FHI 7.2 documentation, minor code cleanup
- remove some unused functions
- make one function static
- add callback function documentation
- provide some developer function
NR build improvements
This MR is an attempt to improve compilation of NR softmodems by
removing some of NR-LTE cross-compilation (at the cost of a small dummy
file for nr-softmodem) and one small gNB-NRUE cross-compilation.
Fix ULSCH ID type to handle large max_nb_pusch values (ULSCH procedures)
The ULSCH_id variable is currently defined as uint8_t, which limits its
range to 0-255. However, gNB->max_nb_pusch can exceed this range
depending on the configuration (buffer_ul_slots and
MAX_MOBILES_PER_GNB). This can lead to incorrect behavior or undefined
results when max_nb_pusch is larger than 255. This commit changes the
type of ULSCH_id from uint8_t to int to accommodate larger values of
max_nb_pusch.
The issue was observed when running the OAI gNB with MAX_MOBILES_PER_GNB
set to 64 UEs. The root cause was traced back to the changes to UL
processing introduced in !2952.
Change to bool for clarity. The log message would sometimes only show up
at the end, which is misleading; use the logging module, which
harmonizes log statements and should make this appear immediately.
We still do not handle RUs with MTUs of 1500 properly in F release;
therefore, for the close future, we cannot remove support for E release.
Also, it "promises" this for January, which is in the past already.
Update to keep the warning logical.
remove ul_ch_estimates_time to save memory
remove ul_ch_estimates_time that saves 50MB memory to access in RAM, and
make better quality scope data passing (no race)
Add support for ARM build pipeline
Modify the existing python code to be able to build images where the
image tag can be prepended with a prefix, here arm_. This is preparatory
work to create the ARM build image pipeline, and reuse the existing
internal registry on porcepix to have x86 and ARM images coexist.
Fix various bugs in the build system to allow to build on a system with
as many cores as gracehopper.
Also, fix two programs (usim, nvram) to work correctly under ARM.
Miscelaneous improvements in PHY simulators
1: Add a SIGINT handler to NR PHY simulators
When using T2 virtual functions, it is important to properly stop DPDK
and free the device. Otherwise the virtual functions may be blocked and
a restart of the admin application is necessary.
If not carefully done, such kind of operation can lead to losing cores
to DPDK processes that cannot be stopped. This can lead to situations
where the machine is locked and can only be unlocked by a power cycle.
Always properly stopping DPDK and freeing the device reduces the risk of
such situation to happen.
Up to now, SIGINT was shutting down the PHY simulators without freeing
the device. This commit adds a signal handler to handle SIGINT in a way
that allow to properly free the device.
This feature is added to all the NR PHY simulators whether they use T2
or not in case it is now or later of any use.
2: Make nr_ulschsim functional
There were two issues that were making nr_ulschsim non functional:
1. The channel output was not copied to decoder input (llr array)
2. The test on decoding successful outcome was wrong
The result was that nr_ulschsim was succesfull whatever were its
arguments. This changeset fixes the two issues so that nr_ulschsim is
now functional.
Harmonize and update Frequency Range computation to the current values
specified by the standard
3GPP TS 38.101-1 Version 19.0.0 Table 5.1-1: Definition of frequency
ranges
- FR1 from 410 MHz to 7125 MHz
- FR2 from 24.25 GHz to 71 GHz
1. Change the name of `openair1/SIMULATION/NR_PHY/nr_dummy_functions.c` into `openair1/SIMULATION/NR_PHY/nr_unitary_common.c` for naming coherence after adding the SIGINT handler which is not a dummy function.
2. Instead of being built once for every NR PHY simulators, the common functions source file is built once as an object and linked to each simulator.
The ULSCH_id variable is currently defined as uint8_t, which limits its
range to 0-255. However, gNB->max_nb_pusch can exceed this range
depending on the configuration (buffer_ul_slots and MAX_MOBILES_PER_GNB).
This can lead to incorrect behavior or undefined results when max_nb_pusch
is larger than 255. This commit changes the type of ULSCH_id from uint8_t
to int to accommodate larger values of max_nb_pusch.
The issue was observed when running the OAI gNB with MAX_MOBILES_PER_GNB set
to 64 UEs. The root cause was traced back to the changes to UL processing
introduced in !3166 (!2952).
After the parent commit, the registry might contain prefixed images.
This commit adds the functionality to pull such prefixed image. Since we
rename the pulled image (to have a consistent name, from whichever
registry we might pull), remove the prefix as well so that it can be
used with other CI functionality (remove image, use in test, ...)
Examples for renaming:
- pull from internal_registry for x86
internal_registry/oai-gnb:branchA => oai-ci/oai-gnb:branchA
- pull from internal registry for ARM with "arm_" prefix
internal_registry/oai-gnb:arm_branchA => oai-ci/oai-gnb:branchA
- pull from x86 other registry (e.g., openshift)
openshift/namespace/oai-gnb:branchA => oai-ci/oai-gnb:branchA
The only currently viable way to push ARM images to our registry is to
use a custom tag prefix. Modify the python test code to specify such a
tag, and default to "" (no prefix).
After the preceding commits, it's now possible to build images on ARM.
Add a specific "native_arm" build kind to only build what we need as of
now (do not only call it "arm", as that would match the kind
"build_cross_arm64").
Add the corresponding XML. Pushing of images is disabled, as this does
not work as of now.
The (existing) Aerial pipeline on devkit uses an older version of nvipc,
which is upgraded on gracehopper. Use a glob to match them equally,
which also aligns this code with the corresponding Dockerfile, which
already uses that glob.
Use the right type for variable, as getopt_long() returns an int. Using
char is not a problem on x86, but prevents the return of -1 in case of
parameter reading end. This led to infinite loops on ARM, which is fixed
through the variable type change. An additional counter measure (showing
the problem) would be to print and error out when reading an undefined
parameter, which is added here as well.
This has been forgotten when making the same change for getopt() in
cf9854601c ("getopt() returns int").
Dockerfiles hardcoded one copy operation to x86; generalize to capture
ARM as well. Since the target directory cannot have any globs, we need
to manually check the right directory, then move the file.
Note that this is only necessary since we are forced to switch the
compiler, as Ubuntu's default gcc-11 does not work with FlexRIC. When
upgrading to Ubuntu 24, these lines should disappear and asan be
installed as normal. See commit 94497435e7 ("Upgrade CI images to
Ubuntu 22").
SCTP: avoid assert on partial SCTP message
The receive buffer for SCTP, before this branch, is 8192. If a message
is larger, we receive only a partial message, which makes the gNB abort.
Remove the abort to not be susceptible to a message intended to crash
the gNB.
also, increase the receive buffer to be more forgiving for large messages
Closes: #920
Disable EPS NAS security algorithms in 5GMM UE capabilities
OAI nrUE is not supporting multiple RATs, therefore the EPS NAS security
algorithms bit in 5GMM UE capabilities is not relevant.
This bit is only relevant if N26 interface is supported by the AMF and
the UE is supporting S1 mode, meaning that the UE is connected to a 4G
LTE network, via the S1 interface (eNB - MME/SGW). When the UE performs
an inter-system change from N1 mode to S1 mode, it transitions from 5GC
to the EPC: at network level this happens over the N26 interface (which
connects the 5G AMF to the 4G MME).
In this transition is where the EPS security context becomes relevant:
the UE does not know about the N26 interface, however is the AMF that
can tell the UE, e.g. during the registration procedure, if the UE sets
the S1 mode bit to "S1 mode supported" in the 5GMM capability IE, and
the AMF supports the N26 interface, the AMF will include the Selected
EPS NAS security algorithms IE in the SECURITY MODE COMMAND message,
which is what happened in #915.
Closes: #915
Even though the remaining NR PHY simulators do not use the T2, we may still feature them with a SIGINT handler for proper termination on SIGINT and for a matter of completeness.
The remaining NR PHY simulators are:
* nr_pbchsim
* nr_prachsim
* nr_psbchsim
* nr_pucchsim
There was two issues that were making nr_ulschsim non functional:
1. The channel output was not copied to decoder input (llr array)
2. The test on decoding successful outcome was wrong
The result was that nr_ulschsim was succesfull whatever were its arguments.
This commit fixes the two issues so that nr_ulschsim is now functional.
When using T2 virtual functions, it is important to properly stop DPDK and free the device.
Otherwise the virtual functions may be blocked and a restart of the admin application is necessary.
Up to now, SIGINT was shutting down the PHY simulators without freeing the device.
This commit adds a signal handler to handle SIGINT in a way that allow to properly free the device.
This feature is first added to the PHY simulators that use the T2 which are `nr_ulsim`, `nr_dlsim`, `nr_ulschsim` and `nr_dlschsim`.
Teodora