This reverts commit 0d0e111135. It was
set to UE RX to TX time to 2 as it was deemed that the UE could sustain
this time. However, we noticed a degradation of performance, so reset
the RX to TX time to something higher to ensure proper performance.
Removed arbitrary offset of 30dB.
Changed sign for pathloss: pathloss calculated in compute_nr_SSB_PL is the difference between transmitted and received power.
Transmission power for preamble should compensate the pathloss, therefore power should increase with pathloss.
This reverts commit eaf28414ca.
This assertion was introduced as we (wrongfully) thought we needed to
calculate the SSB ARFCN at the CU. Since PBCH might carry one bit, which
is not available at the CU, only certain SSB ARFCNs would have been
possible.
With the availability of the SSB ARFCN through the
MeasurementTimingConfiguration, this is not necessary anymore.
- according to 5.3.7.4 of TS 38.331: 1> re-establish RLC for SRB1;
- gNB:
1) re-establish RLC for SRB1 in nr_rlc_update_id
2) re-establish RLC for remaining RBs concurrently with RRCReconfiguration
issue: gNB) in nr_rlc_update_id the gNB is re-establishing RLC for all
RBs at the same time when receiving RRCReestablishmentRequest
from UE
UE) according to the specs, the UE is re-establishing RLC for
SRB1 with RRCReestablishmentRequest the other RBs are
re-established during RRCReconfiguration (in our case in
nr_rrc_ue_process_RadioBearerConfig) when receiving
reestablishRLC IE in rlc_BearerToAddModList
RLC TX) this leads to RLC counters mismatch after re-establishment:
control PDUs discarded until max nb of retx is reached
and then UL failure occurs
The main work of this commit is to rewrite cipher_aes_128_cbc_cmac()
which was too slow and created issues when running the 4G eNB on some
machines (LLL when using a b210).
Instead of creating the security context, use it, and delete it, all in
cipher_aes_128_cbc_cmac(), we introduce the function init_aes_128_cbc_cmac()
to create it, and we change cipher_aes_128_cbc_cmac() to just use it,
and we also adapt free_aes_128_cbc_cmac(). The function aes_128_cbc_cmac()
is removed, it does not follow the new init/use/free API.
Doing so, on the primary test machine used to do this work (a powerful
and fast machine where it is possible to set the CPUs' frequencies)
it was possible to limit the CPUs' frequencies to 500 MHz (it was not
possible to go lower) without any LLL (using a b210, quectel UE in
idle, no data traffic, only periodic measurement reports). Before this
commit, it was necessary to set a frequency of at least 1.8 GHz
otherwise some LLL would appear.
Then we need to adapt the rest of the code to take into account those
changes.
A notion of security container (stream_security_container_t) containing
ciphering and integrity contexts is introduced.
And the code is harmonized for, hopefully, better readability.
The (opaque) type stream_security_context_t is introduced, used by
both integrity and ciphering contexts. The idea is to use a
init()/use()/free() API for all the security procedures, identical for
all the ciphering and integrity procedures.
After the last commit, it is not possible to bind on separate interfaces
for F1-C and F1-U. In other words, it is for instance not possible to
have the F1-C on one subnet on one physical interface, and F1-U on
another subnet on another physical interface. This commit introduces a
second option MACRLCs.[0].local_n_address_f1u to allow to bind F1-U on
an alternative address; if it is not specified, the interface of F1-C is
reused.
The above only works for the DU; no corresponding option exists for the
CU. For the CU, use separate CU-CP and CU-UP.
Use it in the CI.
Bartosz Podrygajlo