Measurement gaps
Scheduling measurement gaps to provide sufficient time for the UE to
re-tune its transceiver to the target carrier, complete the set of
measurements and then re-tune its transceiver back to the original
carrier.
The seq_arr_erase_it function was modifying start_it during the free_func loop,
which led to incorrectly apply the free_func on the whole array.
This commit makes sure the elements "freed" are only those in the range and not the whole seq_arr.
* Fixes the logic by introducing a temporary iterator for the free loop,
preserving start_it and end_it for correct offset calculations.
* Adds a regression test in test_seq_arr to verify that only the selected
subrange is erased and that free_func is called exactly on that range.
Fix various bugs and inconsistencies in config read, SCTP, ITTI, GTP
Fix bugs across various layers, mostly layer 3, including memory leaks.
See the commits for more details.
The primary motivation here is to remove a VLA, as in the parent
commits. Closer inspection revealed that (1) it is only used by the LTE
UE, and (2) it only logs some data which we likely don't need. So I
simply removed this function.
Move RRC radio parameters file to DU
A number of radio-related RRC parameters, e.g., CellGroupConfig, "originate" at
the DU and are sent to the CU for forwarding to the UE only. Similarly, there
are additional parameters, e.g., RLC-BearerConfig (part of CellGroupConfig),
that originate at the DU.
Hence, the DU decides about these parameters, depending on the MAC state and
capabilities. To clarify this, move the existing
openair2/RRC/NR/nr_rrc_config.{c,h} => openair2/LAYER2/NR_MAC_gNB/nr_radio_config.{c,h}
So that developers know that while those are RRC parameters, they originate at
the DU.
In other words, the CU/RRC is not supposed to use any of these functions in
the RRC. Correspondingly, includes of this file have been cleaned up (and when
they are not necessary at the MAC as well)
Enhance UE identity management in Initial UE Message and other NGAP improvements
This MR improves the Initial UE Message procedures by supporting simultaneous
presence of both 5G-S-TMSI and GUAMI. Previously, only one identity could be
used, leading to potential AMF selection failures. Now the presenceMask allows
both identities. The AMF selection is prioritizing GUAMI first, then falling
back to 5G-S-TMSI, and finally using PLMN or highest capacity.
Also, fix handling of selected PLMN identity in NGAP.
Refactoring:
- Select the AMF based on (1) absence of UE Identity (2) Presence of GUAMI
(3) Presence of 5G-S-TMSI
- Also refactored the AMF selection logic for better readability and reliability.
- Refactor and cleanup rrc_gNB_send_NGAP_NAS_FIRST_REQ
- Replace ngap_pdu_t with byte_array_t
- Add guami_t to ngran_types.h: refactor NGAP and RRC code to use one common
GUAMI type instead of two identical ones
Also:
- Bugfix in ngap_gNB_handle_ng_setup_response: use correct count for PLMNSupportList
Closes issue #801
A number of radio-related RRC parameters, e.g., CellGroupConfig,
"originate" at the DU and are sent to the CU for forwarding to the UE
only. Similarly, there are additional parameters, e.g., RLC-BearerConfig
(part of CellGroupConfig), that originate at the DU.
Hence, the DU decides about these parameters, depending on the MAC state
and capabilities. To clarify this, move the existing
openair2/RRC/NR/nr_rrc_config.{c,h} => openair2/LAYER2/NR_MAC_gNB/nr_radio_config.{c,h}
So that developers know that while those are RRC parameters, they
originate at the DU.
In other words, the CU/RRC is not supposed to use any of these functions
in the RRC. Correspondingly, includes of this file have been cleaned up
(and when they are not necessary at the MAC as well).
When data is generated by "normal" T tracers, it should be fine.
But it might come from unknown sources and then content might be
"strange". So let's validate input data a bit more.
The way allocation is done (granularity of 64KiB) makes a crash more
difficult to achieve, but if a trace is exactly 64KiB, we miss 4 bytes
in the realloc and then anything may happen.
ngap_pdu_t has the same definition as byte_array_t, so it is
replaced by the latter. This simplify the stack and reduces
duplicated code.
Also, add function create_byte_array to copy from an
existing buffer to a new byte_array_t and replaced
allocCopy with create_byte_array, and adopted
OCTET_STRING_fromBuf whenever possible.
Add CI test to force RRC IDLE and new connection setup with 5G-S-TMSI
This MR is a follow up to !2725 (merged)..
The primary goal is to introduce a CI test that enforces the following behavior:
- Forces the UE to enter RRC_IDLE state.
- Validates the UE's re-connection procedure using the 5G-S-TMSI as the UE
identity.
* Close entity->pdusession_sock manually before pthread_join() to unblock sdap_tun_read_thread()
* Update tun_destroy() to open a fresh socket for interface management, independent from the data socket
* Fix check on success of change_interface_state() in tun_destroy(): is a boolean
* Handle ENODEV error when bringing interface down: treat as success if the interface is already gone.
* tun_destroy() is now handling INTERFACE_DOWN, so `INTERFACE_DOWN` in `tun_config()` is no longer needed
In NR with several layers, we may have MAC PDU of size bigger than 64KB,
which does not fit into a UDP buffer, destroying macpdu2wireshark.
Let's add an option to dump to a pcap file instead of using UDP packets.
The DLT 252 magic is used (check wireshark documentation to understand).
Run macpdu2wireshark with -h to see how to configure wireshark to read
the produced files.
- modify retrieve_ldpc_enc_op() to store encoded results in a packed format
- add timing measurements for T2 encoder
- add simde implementation for bit reversal
- Introduce new bit reversal implementation using simde_mm_gf2p8affine_epi64_epi8
instruction, based on https://wunkolo.github.io/post/2020/11/gf2p8affineqb-bit-reversal/.
This implementation requires GFNI and AVX512VL support on the target machine.
The UE stores PDCCH search spaces from the network in NR_BWP_PDCCH_t
struct within NR_UE_MAC_INST_t. After storing, the pointers otherSI_SS,
ra_SS and paging_SS are updated to point to the stored SS. Multiple
pointers could point to the same stored SS struct depending on
configuration. Then when the UE wants to release the SS, the pointers
are used to free the stored SS using ASN_STRUCT_RESET(). If multiple
pointers point to the same SS, calling ASN_STRUCT_RESET() on all
pointers would lead to double free. So one needs to check for dangling
pointer before freeing.
Instead of using pointers and assigning them during configuration, we
use SS id for otherSI_SS, ra_SS and paging_SS to retrieve the pointers
whenever needed. When the UE wants to release the SS, we make them -1
indicating an invalid SS id.
NR UE: consider the ratio of PUSCH EPRE to DMRS EPRE when calculating PUSCH
DMRS power scaling
When calculating DMRS scaling ratio, we should consider PUSCH EPRE to DMRS
EPRE according to TS 38.214 Table 6.2.2-1.
Close#929
This commit refactors the TUN interface management by moving its creation
and configuration from the PDCP layer to the SDAP layer for UE.
Key changes include:
- Introduced `tun_generate_ue_ifname` and `tun_destroy` functions for better
TUN interface lifecycle management.
- Added support for creating and destroying UE-specific TUN interfaces in SDAP.
- Refactored `nr_pdcp_module_init` to remove TUN-related logic and moved it
to SDAP.
- Updated NAS and SDAP layers to handle PDU session-specific TUN interface
creation and configuration.
- Enhanced SDAP entity management to include TUN socket handling and thread
lifecycle.
- Updated NAS message handling to initialize default PDU session TUN
interfaces in NOS1 mode.
- Use a single SDAP thread function for gNB and UE
- Allow noS1 mode also in SA on gNB
These changes improve modularity by isolating TUN interface management within
the SDAP layer, aligning with the 3GPP architecture, and simplifying the PDCP
layer.
Co-Authored-By: Robert Schmidt <robert.schmidt@openairinterface.org>
Extend F1 Handover test
do 1 more handover in the same test to verify robustness
- This MR keeps a simple ping after the second handover since there are
still issues due to scheduling starting too early, that is as soon as
the UE context is added. This leads to retransmissions that could
eventually lead to a test failure. The issue will be fixed in a future
MR.
add check on connected DU to verify successful handover
- a new telnet function gets in input the UE ID and returns the ID of
the connected DU
wait some time after deploying DU to mimic time for measurements
Optimization for unused symbols in NR UE
After processing TX frequency domain data skip IFFT call for symbols
that aren't used, the time domain buffer is memset instead.
Biggest benefit is when UE does not transmit PUSCH, or PUSCH is using <
14 symbols
FHI72: Management plane support
At the moment, tested with Benetel 550 and 650 RUs FW v1.2.2
- support for multiple RUs
- RPCs implemented: <connect>, <subscribe>, <get>, <supervision-watchdog-reset>,
<edit-config>, <validate>, <commit>, <disconnect>
- read PTP sync status from operational datastore xml
- get vendor name, and for xran store RU MAC, MTU and IQ bitwidth and PRACH
offset, and transfer this info
- store interface name, low-level-tx/rx-endpoint names, tx/rx-carrier names,...,
from operational datastore xml
- add reference gNB/DU config files with M-plane support
- update FHI readme
Jaroslava Fiedlerova