Previous to this commit, the CU creates an F1 instance and initializes
GTP after a successful connection establishment, and tears the F1
instance down after the DU disconnects. This does not work when trying
to connect multiple DUs, or have them reconnect, as e.g., GTP
re-initialization fails (socket already bound).
This commit makes the CU F1 instance creation and GTP init at CU task
init (only once), and also frees the F1 instance only after the CU task
exits, which is at termination of the application, typically.
Remove dead code, result of 2136ceec0d: we
cannot connect() in GTP on multiple remotes (as then only packets of one
host might be received), but might need to send to multiple remote
sockets.
integration_2023_w43
See merge request oai/openairinterface5g!2415
* !2407 hotfix: UE DCI format 11: only 1 dl_config instead of 2
* !2372 chore(ci): testing up to 10 UEs in 5G RF simulation
* !2396 Add optimized function to count the number of bits set in uint64_t variable
* !2383 E1: implement release bearer, handle multiple CU-UPs
* !2413 Assigned value is garbage or undefined reported by scan-build
* !2387 Small fixes for UE stability and introduction of ITTI "no-thread" mode (separate bug fixes and ITTI changes?)
* !2410 Fix CellGroupConfig-related memory problems
* !2414 fix doxygen
- Set the correct QoS flow ID to associate a correct QoS flow to the
bearer: the UE would misassociate otherwise
- Set the DRB as the default: the handler applies bool with true==1, so
use bool value
Before this commit, the DMRS_UplinkConfig was stored in a separate
DMRS-related structure, although it is always referenced in the
PUSCHConfig of the current UL BWP.
Through certain code paths (e.g., retransmission), it could happen that
an old DMRS_UplinkConfig was accessed that was freed (through new
CellGroupConfig).
In this commit, we always look up the DMRS_UplinkConfig in the current
PUSCH config, which should always be up to date.
Until this commit, the SIB1's PDCCH_configCommon was set (via a pointer,
i.e., an indirection) to the one of the ServingCellConfigCommon (SCC).
Afterwards, the SIB1 code further populated this PDCCH configCommon,
indirectly populating the one of the the SCC, on which code later
depends.
Not only did this create possibilities for double-frees (since freeing
the memory of SIB1, then SCC would free the PDCCH configcommon twice),
but also it makes it harder to track where certain structures are
populated. Hence, this commit solves both issues:
- The SCC is correctly populated on initialization of the SCC
- The SIB1 makes a deep copy of the SCC' PDCCH configCommon
This resolves the two issues above.
This allows to communicate with multiple remote hosts. A further
improvement would be to refactor this piece of code into a function and
call it only when necessary, i.e., when we know the remote host, or want
to add one to a list of hosts.
This commit introduces the capability to handle multiple CU-UPs. It uses
a RB tree and puts the CU-UPs into the tree. Upon the connection, it
associates UEs to CU-UPs in a round-robin fashion.
A later commit will introduce an RB tree to manage multiple CU-UPs. The
RB tree implementation relies on some macros that generate RB tree
functions. Functions using the RB tree implementation will be grouped in
this file.
The E1AP Setup Request contained the network configuration (IP address,
ports) as well as the actual E1AP Setup Request application data
(Supported PLMNs, ...). This has the drawbacks that
- The E1AP Setup Request is stored to retrieve IP addresses in the E1AP
module, which is confusing as the Setup Request, per standard, has no IP
info
- The CU-CP received an E1 Setup Request for configuration during start
up, but it did not actually receive such Setup Request, but merely the
IP configuration to set up the socket
This commit splits the E1AP Setup Request into a "real" Setup Request
for application data, and creates a new type e1ap_net_config_t to group
all IP configuration data. Further, a new ITTI message type
E1AP_REGISTER_REQ is introduced to group both types. What happens is
- RCconfig_NR_CU_E1() reads both E1AP application-level data and IP
configuration, as previously
- The data is sent to the CU-CP. It discards the E1AP Setup Request
data, and only uses the network configuration to set up the socket
- The data is sent to the CU-UP. It uses the network configuration to
connect to the CU-CP, and then sends the E1AP Setup Request to the
CU-CP.
Currently, the CU-CP still stores the Setup Request locally, which will
be changed in the next commit to send it to the RRC.
The DRBLists inside E1AP message are for E-UTRAN. We don't support that
with our CU-CP/UP yet, so remove it to reduce ambiguity and complexity.
For the same reason, we remove the CN Support, which for us is always
"NR".
Integration Branch 2023.w42
See merge request oai/openairinterface5g!2403
* !2368 NR UE SRB0
* !2399 build_oai: Auto-detect if terminal supports colors
* !2398 Correctly load channel models
* !2365 Change PDU_Length and tlv length calculation to be inline with SCF 222.10.02
* !2402 chore(ci): enabling the ARM cross-compilation pipeline
* !2397 fix(ci): improve for parallelism issue in Groovy
* !2405 Clean IDE files and remove old documentation
This enables build_oai to detect if the output terminal supports colors.
If it does, it will use colors in its output. If it does not, it will
just print the text, without color codes, improving legibility.
integration_2023_w41
See merge request oai/openairinterface5g!2394
* !2389 Remove global variable rx_spatial_power
* !2364 NR UE PUCCH2 sanitize errors
* !2352 Break DCI processing function into smaller pieces
* !2391 Remove calloc from L1 at CSIRS_PDU conversion function
* !2393 Fix UE assertion due to PUCCH resource lookup all BWPs
* !2307 Improve documentation for L2sim Readme
* !2310 doc(websvr): how to install properly the dependencies
integration_2023_w40
See merge request oai/openairinterface5g!2381
* !2345 fix bug for IE cause in pdu session accept
* !2361 Fix Msg3 MAC CE C-RNTI
* !2371 fix(ci): printing the warning and error lines for CI purposes
* !2374 Fix SSB ARFCN: wrong ARFCNs in FDD
* !2379 fix the selection of DCI candidates at UE
* !2369 Add bwp_size and bwp_start fields to CSI_RS PDU struct at NR UE
* !2349 E2AP Version 1,2,3 and KPM version 2, 3
* !2375 increase the max fd of rfsim, that have been shorten to tightly for cpu saving
* !2367 chore(ci): improve GitLab <-> Jenkins contributor experience
* !2378 F1AP: correct message handling
* !2370 NR PDCP RB suspend
* !2107 Compute RI based on SRS up to 4
* !2339 PUCCH power computation
* !2382 Remove dead code in NR UE
* !2229 PUSCH LLR 128/256 SIMDe routines for ARM/x86
Robert Schmidt