- Change gNB RRC enable_sdap default to true
- Update RRC and RUNMODEM docs to reflect new default behavior
- Clean up CI gNB configs by removing redundant enable_sdap=1
- Keep explicit SDAP disable config for NFAPI gNB VNF
According to TS 38.413:
* AMBR is conditional to PDU Session Resource to setup in the Initial UE
Context Setup procedure
* The UE Aggregate Maximum Bit Rate IE should be sent to the NG-RAN node
if the AMF has not sent it previously. If it is included in the PDU
SESSION RESOURCE SETUP REQUEST message, the NG-RAN node shall store
it in the UE context
* Range is INTEGER [0..4,000,000,000,000]
To this purpose, changes in the commit:
* Init AMBR to out of range value when creating UE context
* Store AMBR in UE context whenever is received
* Assert if not set at the time of Bearer Setup (should be known at that stage)
Fix parsing of DU configurations that include both RU and DU ethernet
addresses in the fhi_72 section. The extraneous DU addresses are used
in MPlane to configure the RU.
For now, test in the following configuration:
- 16 parallel channels
- channel length of 32 and 128
- with 61440 and 122880 samples
- 12 trials per each test (due to CUDA kernel loading delay in first iterations)
- multiple MIMO configurations: 2TX - 2/4/8/32 RX, 2/4/8/32 TX - 2RX
Add undocumented Aerial ERROR.indication vendor specific error codes
This MR adds the remaining vendor-specific ERROR.indication error codes
that are undocumented in the Aerial online documentation, but are
present in the cuPHY-CP/scfl2adapter/lib/scf_5g_fapi/scf_5g_fapi.h
header file.
This change stems from the appearance of an undocumented error code
during testing (SCF_ERROR_CODE_L1_MISSING_UL_IQ = 0x44) It aims to ease
the comprehension of the errors thrown by Aerial L1.
Extract common code from `fill_drb_to_be_setup_from_e1_resp` and
`rrc_fill_f1_drb_to_setup` into reusable helper functions to reduce
duplication and improve maintainability. This refactoring enables
multi-QoS flow handling per DRB and prepares helpers for upcoming
PDU Session Modify changes.
Impact:
- Enables multi-QoS flow support: `rrc_fill_f1_drb_to_setup` now
collects all QFIs mapped to a DRB instead of only the first one
- Reduces code duplication between E1 response and direct DRB setup
code paths
- Improves maintainability by centralizing F1 DRB setup logic
Major changes:
- Add `fill_f1_drb_info_nr`: fills DRB information IE including QoS
flows from QFI list
- Add `fill_f1_drb_to_be_setup`: creates F1 DRB to setup structure
from RRC DRB, PDU session, and QFI list
- Add `fill_f1_drbs_from_e1`: processes DRBs from E1 response and
extracts QFIs from drb_config->qosFlows
- Refactor `fill_drb_to_be_setup_from_e1_resp` to use
`fill_f1_drbs_from_e1`
- Refactor `rrc_fill_f1_drb_to_setup` to collect all QFIs mapped to
each DRB and use `fill_f1_drb_to_be_setup`
TS 38.413 8.2.3 PDU Session Modify:
> For each PDU session which failed to be modified, the PDU Session Resource Modify
> Unsuccessful Transfer IE shall be included containing the failure cause
> If the NG-RAN node receives a PDU SESSION RESOURCE MODIFY REQUEST message containing
> some PDU Session ID IEs (in the PDU Session Resource Modify Request List IE) that the
> NG-RAN node does not recognize, the NG-RAN node shall report the corresponding invalid
> PDU sessions as failed in the PDU SESSION RESOURCE MODIFY RESPONSE message
> with an appropriate cause value
Changes in the commit:
* add rrc_gNB_ngap_pdusession_mod_failure helper function to handle
abnormal conditions and send NGAP response with (all) failed PDU sessions
* improve error handling: send NGAP response instead of silently returning -1
when UE context lookup fails (unknown RAN UE NGAP ID)
* add AMF UE NGAP ID validation: check stored AMF UE NGAP ID matches request
and send failure response if mismatch (per 3GPP TS 38.413)
* handle unrecognized PDU Session IDs per 3GPP TS 38.413 8.2.3.4: add to
failed list to be sent in the reponse message
* simplify failure path: reuse rrc_gNB_send_NGAP_PDUSESSION_MODIFY_RESP
instead of manually constructing response message
* remove failed PDU sessions from RRC list in rrc_gNB_send_NGAP_PDUSESSION_MODIFY_RESP
* remove redundant code and improve code organization
* add bounds checking
* improve function signature
This commit refactors the rrc_gNB_send_NGAP_PDUSESSION_MODIFY_RESP function
to improve code clarity, fix bugs, and ensure compliance with 3GPP TS 38.413
section 9.2.1.6.
The main improvement is ensuring the PDU Session Resource Modify Response message
is always sent with mandatory IEs, even when there are no PDU sessions to report
in the optional lists.
Key changes:
- Initialize message structure parameters to 0 by leveraging structure
initialization, ensuring clean state
- Replace local counter variables (pdu_sessions_done, pdu_sessions_failed)
with direct access to resp->nb_of_pdusessions and resp->nb_of_pdusessions_failed,
eliminating redundant state tracking and improving code clarity
- Remove conditional message sending: always send the response message
(per 3GPP TS 38.413 9.2.1.6, PDUSessionResourceModifyResponse must always
be sent with mandatory IEs: AMF-UE-NGAP-ID and RAN-UE-NGAP-ID, even when
optional lists are empty)
- Fix duplicate assignment: remove redundant p->pdusession_id assignment
(was assigned twice in the PDU_SESSION_STATUS_DONE case)
- Improve failed PDU session handling: use direct structure assignment
(failed->cause = session->cause) instead of field-by-field copying,
making the code more maintainable
- Remove failed PDU session upon response
- Enhance logging: improve log messages for better debugging and clarity
- Add function documentation comment
Introduce fill_e1_qos_flow_to_setup to translate pdusession_level_qos_parameter_t (NGAP)
into qos_flow_to_setup_t (E1), including ARP and QoS characteristics (dynamic/non-dynamic).
Refactor fill_e1_drb_to_setup to use the new helper for building QoS flows.
* Only include QoS flows whose drb_id matches the target DRB.
* Add DevAssert(drb_ngran.numQosFlow2Setup > 0) to ensure at least one QoS flow is added.
This change centralizes and simplifies QoS mapping logic between NGAP inputs
and E1 DRB configuration. It ensures correctness by associating QoS flows
to the appropriate DRB.
Major changes:
- Extract QoS flow mapping logic into fill_e1_qos_flow_to_setup helper function
- Filter QoS flows by matching drb_id before adding to DRB setup list
- Replace inline mapping code with helper function call
- Add assertion to verify at least one QoS flow is added per DRB
This commit fixes two related issues:
1. SDAP Header Mapping Bug (cucp_cuup_handler.c):
The original code incorrectly mapped SDAP header configuration from
internal E1AP representation to ASN.1 enum values. The internal
representation (`bearer_context_sdap_config_t`) uses true=present/false=absent,
while ASN.1 enum (`E1AP_SDAP_Configuration_t`) uses
0=present/1=absent. The fix correctly inverts the mapping:
- Internal true (1) → ASN.1 0 (present)
- Internal false (0) → ASN.1 1 (absent)
The commit also clarifies internal representation in the stack.
2. Test Overhead Adjustment (nr-cuup-load-test.c):
The change in (1) led to a failure in nr_cuup_functional_test
with assertion: "size % 4 == 0" in recv_ng()
- Changed UL packet overhead from 3 bytes to 2 bytes in sender_thread()
- Before the SDAP fix, the test incorrectly accounted for 3 bytes:
* 2 bytes PDCP header (correct)
* 1 byte SDAP header (incorrectly included)
- After the SDAP fix, SDAP headers are correctly set to absent, so
only 2 bytes (PDCP header) are needed
This ensures the test sends packets with the correct header size,
matching what CU-UP expects after the SDAP configuration fix.
The load test does not enable SDAP headers, therefore the original 3-byte
overhead was possibly a workaround for the SDAP header bug.
With the bug fixed, the test correctly uses 2-byte overhead (PDCP header).
This commit refactors the PDU Session Resource Modify Response message
structures to improve naming, documentation, and compliance with 3GPP TS 38.413 9.2.1.6.
Changes in NGAP:
- Rename qos_flow_tobe_modified_t to qos_flow_addmod_response_item_t to better
reflect its purpose as a QoS Flow Add or Modify Response Item IE (as per specs)
- Add mandatory AMF UE NGAP ID field to ngap_pdusession_modify_resp_t structure
- Optimize field types: change nb_of_pdusessions and nb_of_pdusessions_failed
from uint16_t to uint8_t (NGAP_MAX_PDU_SESSION limit) (ref 3GPP TS 38.413, 9.2.1.6)
- Update PDU Session Modify Response encoder to use amf_ue_ngap_id from the
message structure (pdusession_modify_resp_p->amf_ue_ngap_id) instead of
retrieving it from UE context (ue_context_p->amf_ue_ngap_id)
- Add comprehensive comments with 3GPP TS 38.413 section references throughout
Changes in RRC/NGAP:
- Populate amf_ue_ngap_id field in PDU Session Modify Response message from
UE context
- Update type reference to qos_flow_addmod_response_item_t
A DRB To Modify Item contains a Flow Mapping Information,
which overrides previous mapping information. For consistency,
rename the count member to reflect a QoS Flow modification,
since it is not limited to setup only.
- Rename DRB flow mapping counters to `numQosFlowsMod`
for a DRB To Modify List
- Adjust encode/decode/equality + E1AP tests
Add DRB To Remove List IE to PDU Session To Modify list, which is sent
in the Bearer Context Modification request. This allows the CUCP to
inform the CUUP about DRBs to be released in a specific PDU session
during a MODIFY procedure.
Changes:
* Add struct definition
* Add enc/dec/eq/cp func
* Add test
- Delete drbs field from gNB_RrcConfigurationReq and its use in RCconfig_NRRRC()
- Remove GNB_CONFIG_STRING_DRBS, help text, index, and GNBPARAMS_CHECK entry from gnb_paramdef.h
- Drop DU-side verification and DRB count logging in gnb_config.c
This commit introduces a new, configurable benchmark,
`test_channel_scalability`, designed to measure the performance and
scalability of the CUDA channel simulation pipeline under various
conditions.
This benchmark provides several key features:
- It supports multiple GPU execution models, including a high-throughput
"batch" mode, an asynchronous "stream" mode, and a "serial" mode for
baseline measurements.
- It includes an optional interference simulation mode, activated by the
`--sum-outputs` flag, which sums the outputs of multiple parallel
channels.
- Simulation parameters (MIMO configuration, signal length,
channel length, and batch size) are configurable via command-line
arguments.
- It runs the full simulation pipeline on both the CPU and the GPU,
reporting the average execution time for each and calculating the
overall speedup.
This commit extends the CUDA API with new functions designed for
high-throughput scalability testing and advanced concurrency.
Key additions include:
- Batched versions of the kernels (`..._batched`) that use the
`blockIdx.z` grid dimension to process many independent channel
simulations in parallel.
- A C-callable wrapper, `run_channel_pipeline_cuda_batched`, to
orchestrate the execution of these new kernels.
- A "streamed" version of the pipeline,
`run_channel_pipeline_cuda_streamed`, which accepts a
`cudaStream_t` as an argument. This allows the calling
application to manage the execution stream, enabling overlap
with other GPU or CPU tasks.
This commit adds a performance benchmark for the end-to-end channel simulation pipeline, named `test_channel_simulation`. Its methodology is as follows:
- It systematically iterates through a matrix of test cases, varying
MIMO configuration (Tx/Rx antennas), signal length, and channel
length.
- For each case, it runs both the full CPU pipeline (`multipath_channel_float`
followed by `add_noise_float`) and the single `run_channel_pipeline_cuda`
function.
- It measures the average execution time for both implementations over
many trials and calculates the resulting speedup.
This provides a performance characterization of the GPU pipeline across different workloads and directly compares it to the CPU baseline.
This commit introduces the main C-callable pipeline function,
`run_channel_pipeline_cuda`, located in a new `channel_pipeline.cu`
file.
This function serves as the primary entry point for the GPU channel
simulation. It orchestrates the entire sequence of operations:
- Manages Host-to-Device data transfers for the input signal and
channel coefficients.
- Launches the `multipath_channel_kernel` and the
`add_noise_and_phase_noise_kernel` in the correct order.
- Manages the Device-to-Host data transfer for the final output signal.
- Synchronizes to ensure completion before returning.
This commit adds a new standalone benchmark, `test_noise`, to measure
and compare the performance of the CPU and CUDA implementations of noise
generation.
The benchmark's methodology is as follows:
- It iterates through various configurations, including different
numbers of receive antennas and signal lengths.
- For each configuration, it runs both the CPU (`add_noise_float`)
and CUDA (`add_noise_cuda`) functions multiple times to get a stable
average execution time.
- It prints a formatted table comparing the CPU and GPU latencies and
calculates the resulting speedup.
This commit adds the CUDA implementation for adding Additive White
Gaussian Noise (AWGN) and phase noise to the signal. The code is
located in phase_noise.cu.
- The `add_noise_and_phase_noise_kernel` uses the NVIDIA cuRAND
library for efficient parallel random number generation.
- Helper functions are included to create, initialize, and destroy
the cuRAND states required by the kernel.
- Placeholder for a C-callable wrapper, `add_noise_cuda`, is also
provided.
This commit adds a new standalone unit test, `test_multipath`, to
validate the CUDA implementation of the multipath channel.
The test performs the following steps:
- Generates a random input signal and channel model.
- Runs the CPU version (`multipath_channel_float`) to get a baseline result.
- Runs the CUDA version (`multipath_channel_cuda`) with the same inputs.
- Compares the two outputs by calculating the Mean Squared Error (MSE)
and ensures it is below a small tolerance.
This commit introduces the CUDA implementation of the multipath channel
model in `multipath_channel.cu`.
- Implements `multipath_channel_kernel` using shared memory for
efficient, high-performance convolution.
- Provides a C-callable wrapper, `multipath_channel_cuda`, to
orchestrate the full pipeline of data transfers and kernel
launches.
- The wrapper includes support for multiple memory models (Explicit
Copy, Unified Memory, ATS) via preprocessor directives to adapt to
different build configurations.
- Adds a `interleave_channel_output_cuda` utility to convert signal
data from the CPU's planar format to the GPU's interleaved format.
This commit refactors the CPU-based channel model for improved reusability and extends it with single-precision floating-point support.
This serves as a performance and correctness baseline for the new CUDA implementation.
Key changes include:
- The original double-based multipath_channel function is refactored to remove hardcoded antenna dimensions from its signature. It now accepts dynamically sized arrays, making it more flexible for use in simulators like dlsim and ulsim.
- A new multipath_channel_float function is introduced to operate on float data types, matching the GPU's native format.
- A corresponding add_noise_float function is also added to complete the floating-point CPU pipeline.
- The new float-based functions are designed to work with an interleaved IQ sample format ([I, Q, I, Q]), which is more suitable for vectorized (SSE) and GPU processing.
This commit adds the initial infrastructure for building accelerated simulation components.
- Adds the CUDA_ENABLE option and logic to find the CUDA toolkit.
- Adds the CHANNEL_SSE option to enable SSE-specific code paths.
- Sets required properties on the SIMU target to allow linking with CUDA-compiled objects.
- Creates the initial oai_cuda.h header for the public API.
- By default, eNB_CommitID is set as 'develop' in the config
- When OAI-FLEXRIC-RAN-Integration-Test is triggered by upstream FlexRIC push events, it takes `develop`
- Triggered by RAN takes commit SHA where `origin/SHA` does not work
Eric Mittag