FAPI says these lists should be for MAX_TDD_PERIODICITY (which is maybe
a frame, or a TDD period? but likely not two frames). Reduce to one
frame.
Also, the nFAPI code assumes one entire frame, so use that (this commit
necessary to actually make the PNF work, otherwise, the
packing/unpacking of the FAPI message would need to do 2 frames).
Closes: #876
Use this function to implement distinct behavior for monolithic or PNF:
- monolithic: run the scheduler, as normal
- PNF: send a slot indication; the VNF will send an answer which the PNF
will handle elsewhere.
Add function declarations to make nr_ulsim compile, as NR_IF_Module.c is
part of the MAC sources. As of now, this is necessary; I think the right
way would be to take NR_IF_Module.c out of the MAC, and make this a
"glue" library that sticks L1 and L2 together, in monolithic (in VNF, in
that case, we should not link in L1, and for the PNF not the L2,
creating separate executables... Rome was not built in one day).
We are required to store multiple PUCCH (e.g., for multiple UEs).
However, nr_fill_pucch() automatically freed the previously active PUCCH
structure. Of course(!) this does not make sense.
However, the problem is that init_nr_transport() allocated only one
PUCCH structure. Also this does not make sense to me. The problem was
that slot_ahead was 0, which logically cannot happen in this function
(because slot_ahead is illogical, we must give the radio some time). The
reason is that it uses if_inst->sl_ahead, which, prior to this commit,
was not set.
The init_nr_transport() function is called normally from main() through
init_eNB_afterRU(). In this case, we initialize if_inst->sl_ahead to
what is set in main(). In the PNF case, however, we call
init_nr_transport() from the PNF thread, when receiving the start
request. In the main(), we wait for this to happen, before setting
if_inst->sl_ahead. Hence, initializing this variable (which we should
safely be able to do) before solves the problem.
Fix calculation of RSSI in pucch_rx.c
Fix two issues with RSSI calculation in PUCCH:
- RSSI was calculated using partial sum instead of average of squared samples.
- There was a missing parentheses pair which causes the RSSI value to underflow.
The proper way to calculate power in dBFS is
let signal_energy = average of squared samples of received signal over resource elements, antennas and symbols under measurement
then:
rssi[dBFS] = -10log10(max_sample^2 / signal_energy),
or (to avoid division):
rssi[dBFS] = -(10log10(max_sample^2) - 10log10(signal_energy))
Delay compensation for PUCCH2
- Implementation of delay compensation for PUCCH2, which minimizes for
exampe logs "reported RSRP index XXX invalid"
- Adding a test to the CI to perform the delay compensation in PUCCH2
- Refactor code to use c16_t data type in PUCCH decoder
Remove spinlock from threadpool task return
The idea to use atomic aligned to cache line for counting finished jobs
is reused, but instead of polling a semaphore was added.
Fix two issues with RSSI calculation in PUCCH:
- RSSI was calculated using partial sum instead of average of squared samples.
- There was a missing parentheses pair which causes the RSSI value to underflow.
The proper way to calculate power in dBFS is
let signal_energy = average of squared samples of received signal over resource
elements, antennas and symbols under measurement
then:
rssi[dBFS] = -10log10(max_sample^2 / signal_energy),
or (to avoid division):
rssi[dBFS] = -(10log10(max_sample^2) - 10log10(signal_energy))
Introduce ITTI queue in RRC-to-MAC direction
resolve ue rcc to mac race conditions by a itti queue, but it doesn't
resolve the problem of exact slot we should apply the new cell
configurtion
Move UL_INFO structure allocation local to a rx slot processing
UL_INFO is allocated a gNB, so require mutex and obscur information
passing function to function. Instead, make a local UL_INFO per slot,
removing the mutex and making the code easier to understand.
Use UL_INFO on the stack, to simplify the code. move in the same struct
the associated rach, pdu, crc, srs arrays that where pointed from
directly in gNB structure Keep in nfapi the existing logic that make
malloc for theses rach, pdu, crc, srs array lists
Pass only relevant fields, where appropriate.
Co-authored-by: Robert Schmidt <robert.schmidt@openairinterface.org>
nrLDPC_coding: Fix naming, comments, superfluous variables and documentation typos in coding library interfaces
This MR is clarifying the interfaces to the LDPC coding libraries. It
aims to improve the readability of the interfaces and compliance of
naming with specification 38.212.
NR UE fix DCI mask size
Previous maximum size was 15 but in practice it could be at least up to
18. Also moved assertion on non-contiguous type0 DLSCH allocation to L1
(to remove blocking point for L2 implementation).
Improvements for PUSCH per symbol processing
- Improved the assert in task_ans.c
- Fixed and issue with PUSCH per-symbol processing that could cause an
issue in case num_pusch_symbols_per_thread is not 1.
nrLDPC_coding: improvements
One improvement in this changeset: Functions nr_interleaving_ldpc,
nr_deinterleaving_ldpc, nr_rate_matching_ldpc and
nr_rate_matching_ldpc_rx that were previously linked with the PHY layer
in the executables are now linked with the LDPC coding implementations
where they are called.
The parent commit cleans up and groups oai_exit in one place,
nr-softmodem-common.h. Therefore, this 5G file is included in the 4G
defs_common.h (at least it's mostly 4G), which is not nice. Instead,
define oai_exit also in 4G softmodem-common.h, and include this in
defs_common.h. Remove the cyclic inclusion of defs_common.h in
softmodem-common.h, and resolve all subsequent errors around unknown
types and extern definition mismatches.
Fix and refactor channel average
- Fixing missing init average variable with zero and refactor the code #86b11ab7
Fixes just the missing avg1=0
- Refactor the code to a common SSE/AVX2 inline function using also horizontal add.
- We use int64_t result from now on.
- We decided to fix length to x12 instead of old x9 openair1/PHY/NR_UE_TRANSPORT/dci_nr.c
//compute average channel_level on each (TX,RX) antenna pair
void nr_pdcch_channel_level(int32_t rx_size,
c16_t dl_ch_estimates_ext[][rx_size],
NR_DL_FRAME_PARMS *frame_parms,
int32_t *avg,
int symbol,
int nb_rb)
{
for (int aarx = 0; aarx < frame_parms->nb_antennas_rx; aarx++) {
//clear average level
simde__m128i avg128P = simde_mm_setzero_si128();
simde__m128i *dl_ch128 = (simde__m128i *)&dl_ch_estimates_ext[aarx][symbol * nb_rb * 12];
for (int rb = 0; rb < (nb_rb * 12) >> 2; rb++) { <-------------- here
avg128P = simde_mm_add_epi32(avg128P, simde_mm_madd_epi16(dl_ch128[rb], dl_ch128[rb]));
}
DevAssert(nb_rb);
avg[aarx] = 0;
for (int i = 0; i < 4; i++)
avg[aarx] += ((int32_t *)&avg128P)[i] / (nb_rb * 12); <-------------- and here
LOG_DDD("Channel level : %d\n",avg[aarx]);
}
}
Optimize PHY_ofdm_mod CYCLIC_PREFIX in case of incidentally aligned pointers
It seems that the cyclic prefix is in most cases a multiple of 512 samples.
This means that in most cases the idft output pointer is already aligned and
there is no need to perform an extra memcpy. This saves the memcpy time in
most cyclic prefix insertion cases.
Robert Schmidt