* added fgs_mm_mode_t enum
* added struct member to NAS
* modes: FGS_IDLE, FGS_CONNECTED
* according to 5GS mobility management (5GMM) modes 5.1.3.2.1.1 of TS 24.501
Integration: `2025.w05`
Closes#885
See merge request oai/openairinterface5g!3233
* !3102 Dockerized development environment
* !3185 Add IQ file recording and IQ file viewer to ImScope
* !3218 more layer1 cleaning
* !3224 Ensure execution of processSlotTX in order in NR UE
* !3231 Bugfix in frame and slot setting for ULSCH beam allocation
* !3229 Verify the integrity protection of the RRCReestablishment message
* !3230 FHI72: fix for single distributed antenna array for xran F release
* !2984 NAS 5GS refactor
* !3235 Parametrized JenkinsNode and JenkinsResource
* !2799 Changes to support multiple TDD patterns
* !3208 Downgrade gNB power limit LOG from "warning" to "debug"
Downgrade gNB power limit LOG from "warning" to "debug"
Downgrade the UE power limited LOG from LOG_W to LOG_D. This is to avoid
flooding stdout when UE in low coverage enters power limited state for a
longer period of time. The same information can be inferred from the
periodic UE print which also contains PH value (negative PH values
indicate that the UE is power limited)
Also, correct some typos in PH calculation.
Closes#885
Changes to support multiple TDD patterns
- Updated the configuration changes for 2 Patterns
- Update the TDD table configuration for NFAPI
- Added the tdd bitmap for the period
- Adapted the bitmap for UL/DL for the multi TDD pattern
- Updated the RACH procedure for multi TDD pattern
- Updated DL and UL scheduler for multi TDD pattern
Parametrized JenkinsNode and JenkinsResource
Parametrized variables in Jenkinsfile for automated tests on Colosseum
after update of OAI Jenkins server.
NAS 5GS refactor
The goal of this MR is to reorganize the NR NAS code into:
- enc/dec library functions (5GS, 5GMM, 5GSM, NR_NAS_defs.h,
nr_fgs_nas_lib.c)
- handlers and callbacks (nr_nas_msg.c)
The following changes are introduced:
1. migrate 5GS enc/dec lib (5GMM and 5GSM) to a dedicated folder
2. add a nested CMakeLists structure
3. refactor NR NAS enc/dec functions
4. refactor NR NAS messages struct definitions
5. remove most of dependency from NAS LTE
6. further refactor of PDU Session Establishment Accept processing to
separate enc/dec from handling
7. made naming of 5GS definitions consistent whenever necessary
8. cleanup unused code
9. remove redundant struct definitions
Also:
1. fix decoding of AMF Set ID in 5G-S-TMSI UE identity
2. replace Byte_t directly with uint8_t
FHI72: fix for a distributed antenna array for xran F release
in the Rx callback I reset the number of section descriptions/number of
fragments to 0, but for each antenna up to max number of antennas per
RU, instead of up to max number of distributed antenna array
* Remove the ulsch_slot_bitmap and dlsch_slot_bitmap from nrmac
* Adopt the new is_dl_slot/is_ul_slot functions in the stack
to replace is_xlsch_in_slot: these functions are getting
the DL and UL slots as they are set in the TDD configuration
stored in tdd_slot_bitmap (frame_structure_t)
* Keep is_xlsch_in_slot in openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_phytest.c:
this is necessary because the phy-test pre-processors are using the bitmaps
dlsch_slot_bitmap and ulsch_slot_bitmap to check which DL/UL slots to use
for transmission among those set in the TDD configuration
Co-authored-by: Guido Casati <guido.casati@firecell.io>
previously we had decodeRegistrationAccept acting as a handler and calling
decode_registration_accept to do the decoding. However the logic was mixed
between the two functions, the naming was confusing and the code was hard
understand. The goal of this commit is to simplify the code, improve
readability and maintainability, while adapting the relevant function
to the new OAI NAS libs structure.
To this purpose:
* move enc/dec logic to NAS lib openair3/NAS/NR_UE/5GS/5GMM/MSG/RegistrationAccept.c -
the logic of parse_allowed_nssai, get_allowed_nssai has been moved to
decode_registration_accept and decode_nssai_ie
* add decode_nssai_ie and use it for both Allowed/Configured NSSAIs list (IE handling was added)
* do processing in the handler handle_registration_accept
* simplify the code by removing nested calls
* improve handling of PDU length
Currently only Registration Result, 5GS Mobile Identity, Allowed/Configured NSSAI
are decoded. The other optional IEIs are skipped (only the length is processed).
Downgrade the UE power limited LOG from LOG_W to LOG_D. This is to avoid flooding
stdout when UE in low coverage enters power limited state for a longer period of
time. The same information can be inferred from the periodic UE print which also
contains PH value (negative PH values indicate that the UE is power limited)
- in the Rx callback I reset the number of section descriptions/number of fragments to 0,
but for each antenna up to max number of antennas per RU, instead of up to max number of a distributed antenna array
Ensure execution of processSlotTX in order in NR UE
Make sure that processSlotTX is executed in slot order.
There is a bug that causes decoding error when processSlotTX is executed
out of order. The root cause is not known at this point, but this change
avoids the bug altogether.
Add IQ file recording and IQ file viewer to ImScope
This changeset introduces the following changes to ImScope:
- Added the ability to record IQ data using the same mechanism as
ImScope.
- Added a new executable target imscope_iq_file_viewer for viewing IQ
files.
- Introduced a command line argument --imscope-record that enables data
recording mode.
- Refactored a lot of the scope code
Usage:
- To record IQ data, run a modem with --imscope-record flag. The
recording happens whenever a modem calls dumpScopeData, which
currently is done only in gNB on PUSCH DTX and PUSCH CRC NOK. There
is a limit of ~1GB of files written by the thread in a signle run to
avoid accidentally exhausting disk space. If a directory imscope-dump
is available the data will be recorded there in .imscope files.
Otherwise files are written to the directory the modem was run. This
is done so that the directory can be mapped in a docker container.
- To view recorded IQ files, use the new executable
imscope_iq_file_viewer. This can be done by running:
./imscope_iq_file_viewer <path_to_iq_file>
Replace <path_to_iq_file> with the path to the IQ file you want to view.
Dockerized development environment
This commit introduces a fully dockerized dev env you can start on any
machine that has docker without installing any direct OAI dependencies
on host.
This allows to migrate development environments between machines easily.
Several complementary scripts were added to enable smooth transition
between your docker environment and host environment. Your user and sudo
should work inside the environment.
In its current state, the environment can be used to compile
nr-softmodem with 7.2 FHI but it cannot run it due to missing
dependencies.
This commit introduces a fully dockerized dev env you can start on any
machine that has docker without installing any direct OAI dependencies
on host.
This allows to migrate development environments between machines easily. Several
complementary scripts were added to enable smooth transition between your docker
environment and host environment. Your user and sudo should work inside the
environment.
* the last 6 bits of the GUTI represent the AMF Pointer
* the AMF Set ID is 10 bits long
* the Registration Accept message received from the network contains the GUTI
which, when properly decoded, will be used in any possible following Registration Request
* use defines whenever possible
* introduce a switch to handle security type. Currently only integrity protected and ciphered
is handled, however the idea of the switch is to make the code ready for the future when
different security types will be handled and different actions should be taken based on that.
* define NAS_INTEGRITY_SIZE
* the goal of this commit is to refactor capture_pdu_session_establishment_accept_msg
into a decoding function
* PduSessionEstablishmentAccept.c is in the 5GSM library and shall only do encoding operations
* handling of PDU Session Establishment accept message is done in nr_nas_msg.c
* adopted new NAS decoding functions in the process
* improved QoS rules decoding
* convert getShort into a macro and add to NAS utils
as per legacy code, the NAS functions in nr_nas_msg.c were encoding
the header in the plain header contained in MM_msg
(e.g. plain -> mm_msg -> header in fgs_nas_message_t). The same
header was encoded in the mobility management message contained
in the same struct (e.g. plain -> mm_msg -> registration_request
-> protocoldiscriminator). As this was more complicated than
necessary, the goal of this commit is to simplify the code and
improve readability. Namely:
* Refactor MM_msg into fgmm_nas_message_plain_t to contain
(1) 5GMM Header
(2) 5GMM Payload union
* Use fgmm_nas_message_plain_t and fgmm_nas_msg_security_protected_t
in the 5GMM NAS procedures
* Remove NAS header IEs from 5GMM messages structs and use
the header in fgs_nas_message_plain_t.
This reduce also the repetitions of header members in each
of the 5GMM messages structs.
* Rename struct to distinguish between 5GMM and 5GSM
* Remove fgs_nas_message_t and nas_msg_header_t,
use directly basic 5GS struct definitions, simplify the code
* The callbacks in nr_nas_msg.c are now doing
(1) encode header with the common NAS lib
(2) encode contents with the 5GMM libs
* improve code readibility in the process
* replace encoding code with proper functions from the lib
* remove unnecessary header members in struct definition
this commit removes last enc/dec code in nr_nas_msg.c
* move enc/dec definitions to NR_NAS_defs.h and add new lib file nr_fgs_nas_lib.c
both used by nr_nas_msg.c
* move utility macros to fgs_nas_utils.h: this can be used in all the 5GMM, 5GSM lib files
* use nr_nas_msg.c for handlers/callbacks only, it should call the enc/dec
functions in nr_fgs_nas_lib and in the 5GMM, 5GSM libs
* 5GMM, 5GSM libs should only do the enc/dec of the NAS message contents
Guido Casati