Fix SRS power computation
The SRS symbols have been remapped recently in
srs_estimated_channel_freq, and therefore the calculation of the SRS
power has to retrieve the symbols from different positions.
CI: Rename RAN-SA-2x2-Module-CN5G pipeline
RAN-SA-2x2-Module-CN5G performs tests not only with 2x2 but also with a
4x4 MIMO configuration. The pipeline name has been generalized to
RAN-SA-Multi-Antenna-CN5G to cover multiple antenna configurations.
RRC: Multi-cell handling architecture
This MR implements a foundational multi-cell handling architecture for
RRC by separating DU management from cell management and establishing a
hierarchical cell organization within each DU container. The changes
enable proper multi-cell support where each DU can serve multiple cells,
addressing the previous limitation where DU and cell management were
tightly coupled with the assumption of one cell per DU.
Key Changes:
- Data Structure Separation: Separated for DU containers (DU-specific
info) from cell containers (cell-specific data)
- Global DU and Cell Trees: Cells are now stored in global RB trees in
RRC, similarly to DUs
- Du-specific cell seq_arr: within each DU container (du->cells) is
stored a seq_arr of cells belonging to the DU
- UE Cell Association Framework: Introduced serving_cells array to track
PCell and SCells for each UE with servCellIndex indexing
- Cell Management Library: Extracted cell management functions into
rrc_cell_management.c/h for better testability and maintainability
Other relevant changes:
- F1AP Refactoring: cell list definitions, heap allocation to prevent
stack overflow
- 5G-S-TMSI Helpers: Common helper functions for 3GPP TS 23.003
compliant construction
- Integration Tests: Comprehensive test suite for DU lookup, cell
lookup, and UE cell association
- Cell Duplication Checks: Validation in F1 DU configuration update to
prevent duplicate cells
- Documentation: Updated RRC developer documentation with multi-cell
architecture details
Validated with RFsim in re-establishment and handover scenarios.
Remove VCD signal dumper from NR code
We don't test VCD in 5G NR code (and haven't tested it in 4G for years).
Remove the VCD traces in 5G code to avoid any ambiguity. 4G code remains
in place, as well as the tools to analyze existing traces.
Fix for split 7.2 DU configurations including DU & RU ethernet addresses
Fix parsing of DU configurations that include both RU and DU ethernet
addresses in the fhi_72 section. The extraneous DU addresses are used in
MPlane to configure the RU.
RRC QoS refactor: PDU Session Modify support, SDAP fixes, and code improvements
The goal of this MR is to prepare the RRC/NGAP layer for the multi-QoS
support. The MR:
- enables PDU Session Resource Modify support in RRC/NGAP/E1AP
- fixes SDAP header mapping
- enables SDAP by default
- refactors QoS flow handling in RRC/NGAP
- improves error handling, and code maintainability in RRC/NGAP
Changes:
- NGAP PDU Session Modify:
* add NGAP PDU Session Resource Modify Request/Response handling with
proper error reporting for unrecognized sessions and AMF UE NGAP ID
validation
- E1AP Bearer Context Modification:
* add DRB To Remove List IE to support DRB release during modify
* rename numQosFlow2Setup to numQosFlowsMod in DRB To Modify List
- RRC QoS flow handling:
* enable multi-QoS flow support per DRB
* add utilities to map NGAP QoS parameters to E1AP
* filter QoS flows by DRB ID
- SDAP configuration:
* Fix SDAP header UL/DL mapping between internal representation and
ASN.1 enum (invert mapping)
* change SDAP header fields from long to bool for clarity
- F1 DRB setup refactoring:
* Extract shared helpers for F1 DRB setup list filling
* reduce duplication between E1 response and direct DRB setup paths
- AMBR management:
* Store AMBR in UE context
* validate AMBR is set before bearer setup
- Configuration:
* remove unused drbs configuration parameter
* enable SDAP by default (change default from false to true)
Integrate GPU-Accelerated Channel Simulation + CI Test Pipeline
This MR builds on top of MR !3588 (feat: GPU Accelerated Channel
Simulation Pipeline).
The main portion of the changes is directly taken from MR !3588, and
focuses on integrating the GPU-accelerated channel simulation. On top of
that, this MR adds CI-related configurations to introduce a new channel
simulation testing pipeline into the CI --> RAN-Channel-Simulation
This MR introduces a CUDA-based pipeline to offload the
multipath_channel and add_noise channel simulation functions to the GPU.
This enables large-scale, real-time physical layer simulations not
possible on the CPU.
For full documentation, please see the file at openair1/SIMULATION/TOOLS/DOC/gpu_acceleration.md.
System & Compiler Requirements: An NVIDIA GPU with a compatible driver
and the CUDA Toolkit installed.
This feature was developed and tested on the GH200 server using the GCC
12 toolchain. To ensure reproducibility, building with GCC 12 is highly
recommended. Build Instructions
The primary flag to enable this feature is -DCUDA_ENABLE=ON. The
following command shows a sample configuration used during development
on the GH200 server:
./build_oai --phy_simulators --cmake-opt "\
-DCUDA_ENABLE=ON \
-DUSE_UNIFIED_MEMORY=ON \
-DUSE_ATS_MEMORY=OFF \
-DCMAKE_C_COMPILER=/usr/bin/gcc-12 \
-DCMAKE_CXX_COMPILER=/usr/bin/g++-12 \
-DENABLE_TESTS=ON"
Memory Model Configuration
The pipeline supports multiple CUDA memory management modes, which can
be configured at compile time. ATS Memory (-DUSE_ATS_MEMORY=ON) is
enabled by default. To use another memory model, you must first disable
ATS.
For a detailed explanation of these models, please refer to Section 3 of
the gpu_acceleration.md report.
vrtsim: add CIR DB playback with CLI flags
VRTSIM: CIR DB playback via CLI
This change adds an optional in-process CIR DB path to VRTSIM. When
enabled with --vrtsim.cirdb and optional --vrtsim.cirdb-path, VRTSIM
reads precomputed taps from cir_db.bin. Default behavior is unchanged
when the flag is not set.
Build
cmake ../../ -GNinja -DOAI_VRTSIM_CIRDB=ON -DOAI_VRTSIM_TAPS_CLIENT=OFF
cmake --build . --target vrtsim
How to run
gNB
sudo ./nr-softmodem \
-O ./targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf \
--device.name vrtsim \
--vrtsim.role server \
--gNBs.[0].min_rxtxtime 3 \
--vrtsim.cirdb 1 \
--vrtsim.cirdb-path /home/merkeb/oai-cir-emitter/cir_db.bin
UE
sudo ./nr-uesoftmodem \
-C 3619200000 -r 106 --numerology 1 --ssb 516 --band 78 \
--device.name vrtsim
Expected logs
- VRTSIM prints that channel modelling is active and uses DB backed taps
- CIRDB ready: model=..., shape=Tx x Rx, L=..., S=..., fs=..., dt=...,
speed=...
CLI behavior and fallbacks
- TAPS client and chanmod paths are unchanged
- If --vrtsim.cirdb is not set or equals 0, VRTSIM uses the existing
channel model path
Add fallbacks for ARMv8a to make it compile
The current code, on ARM, uses ARMv8.1-A RDM instructions. Add a
fallback for processors that do not have this instruction set.
Add some specific compile options for this platform.
Add debian 12 to the list of architectures.
Add undocumented Aerial ERROR.indication vendor specific error codes
This MR adds the remaining vendor-specific ERROR.indication error codes
that are undocumented in the Aerial online documentation, but are
present in the cuPHY-CP/scfl2adapter/lib/scf_5g_fapi/scf_5g_fapi.h
header file.
This change stems from the appearance of an undocumented error code
during testing (SCF_ERROR_CODE_L1_MISSING_UL_IQ = 0x44) It aims to ease
the comprehension of the errors thrown by Aerial L1.
Prior to this commit, noise power estimation could be zero because of a
call to clearArray() in gNB_I0_measurements(). This is problematic, as
this can lead to a noise power of 0 if all symbols in a RB are used,
which in turn leads to a spike in SNR.
To avoid this, use an intermediate array to store noise power, and only
update n0_subband_power if not all RBs are used (i.e., we can detect
noise power). Further, use an exponential moving average to smoothen
noise estimation.
Fixes: fb4235fd50 ("changes in PUCCH0 SNR measurement, testing for
PUCCH power control")
CI: Ensure OAI-FLEXRIC-RAN-Integration-Test pipeline always uses latest commit for non-MR builds
Related MR -> mosaic5g/flexric!77
For push events, we have:
sh "git fetch"
sh "git checkout -f ${commitID}"
We need to do a reset hard so that the run is executed on synchronized
develop branch.
In the pipeline, we see:
17:38:34 + git checkout -f develop
17:38:34 Previous HEAD position was 9cb79027e4 Merge branch 'integration_2026_w05' into 'develop'
17:38:34 Switched to branch 'develop'
17:38:34 Your branch is behind 'origin/develop' by 526 commits, and can be fast-forwarded.
17:38:34 (use "git pull" to update your local branch)
After implementing the fix:
Below are the runs for pipeline triggered by a merge request event:
https://jenkins-oai.eurecom.fr/job/OAI-FLEXRIC/229/https://jenkins-oai.eurecom.fr/job/OAI-FLEXRIC-RAN-Integration-Test/3788/
In the OAI-FLEXRIC-RAN-Integration-Test pipeline, which is executed by
Build with Parameters from OAI-FLEXRIC
We see the pipeline took the latest develop:
11:26:02 + git reset --hard origin/develop
11:26:02 HEAD is now at 9cb79027e4 Merge branch 'integration_2026_w05' into 'develop'
Change Aerial to pack directly in nvIPC message buffer
This MR changes the Aerial pack/send procedures to pack the messages
directly into the nvIPC message buffers.
This saves the use of some memcopy calls, as well as clean up the code.
The P7 message packing/send is now only handled in the file
`fapi_nv_p7.c`
Add 3 functions in fapi_nvIPC.c to allow message allocation, release and
send from fapi_vnf_p7.c
Add 2 functions to access the memory pool sizes allocated from nvIPC, as
we can't use sizeof to report the buffer size to the packing functions
Remove now unused aerial_send_P5_msg , aerial_send_P7_msg and
aerial_send_P7_msg_with_data functions
Now Aerial only has one function to handle sending P5 and another to
send P7 messages
Remove fapi_phy_api_msg from fapi_nvIPC.h as it is duplicated in
nr_fapi.h
Integration `2026.w05`
* !3850 Update vrtsim timing job thread
* !3853 Clear memory in shm_td_iq_channel after RX
* !3823 Fix RSRP overflow
* !3766 UE support to send CSI report on PUSCH
* !3848 Initial implementation of O-RU for 7.2 emulator
* !3860 NGAP: improve error handling in RRCReconfiguration from Handover Command decoding
* !3507 Create Debian and Redhat packages with CPack
* !3875 Fix FFT size for xran_fh_tx_send_slot_BySymbol() and xran_fh_rx_read_slot_BySymbol()
* !3593 NR UE: add support for multiple RF frontends
* !3769 Add Ethernet PDU session support and make PDU session request configurable
* !3831 semi-manual remove of not used #define commands
* Update RFsim4G UE configs for RFsim changes after !3593
* !3821 [FHI72] [xran F] Handle fragmented (un)compressed packets
* !3732 Implement TS 38.473 transparency for CellGroupConfig forwarding and handle re-establishment on a different DU
* !3880 Prevent the PNF from sending P7 messages after sending a STOP.indication
* !3868 CI: Upgrade Aerial pipeline to 25-3
* Revert one CI XML change after !3732Closes#1045, #837, and #1043
See merge request oai/openairinterface5g!3877
The CI test proved not as stable as expected (because the UE triggers A3
events which we don't want), so revert this functionality while we work
on a new pipeline.
This reverts commit bc62e8abca.
Prevent the PNF from sending P7 messages after sending a STOP.indication
Upon stopping the PNF, when sending the STOP.indication to the VNF, set
pnf_p7->terminate to 1.
Add a check on the PNF P7 send functions to not send a message after
pnf_p7->terminate is set.
This prevents the PNF from sending SLOT.indications after stopping,
which sometimes was causing the VNF to process a SLOT.indication after
it had received the indication to STOP.
Also, this MR adds a sanity check on the VNF P7 message handler to
ignore any P7 messages it receives after having it's own terminate flag
set to 1
This MR closes issue #1045
[FHI72] [xran F] Handle fragmented (un)compressed packets
In both E and F, the radio-transport fragmentation is not supported, and
all the "fragmented" (not seen as fragments in the xran, only as
sections) packets contain "E-bit" equal to 1. Per spec, the value 1 for
"E-bit" signifies the last fragment of one symbol. For more info, please
see "ecpriSeqid" section in the spec.
In E:
- nRBStart and nRBSize is updated according to the sent/received packet;
- max sections = 1;
- when a packet is fragmented, the xran uses memcpy(pos, iq_data_start,
size) function, and nothing is stored in start_prbu , num_prbu ,...
In F:
- nRBStart and nRBSize is only used for C-plane messages;
- nPrbElm represents the number of sections for DL only;
- based on the nPrbElm, each section contains UP_nRBStart and UP_nRBSize
parameters which represent the start and number of PRBs in one section
or one fragment;
- when a packet is fragmented, the xran uses nSecDesc and sec_desc to
extract the packet section content, and the data is stored in
start_prbu , num_prbu ,...
Previous work on the fragmentation in F:
- #884
- !3394 - only increases the XRAN_MAX_FRAGMENT from 4 to 6, since it was
only tested with BFP 8, but not end-to-end unfortunately. But this MR
fixes all the issues.
Tested with VVDN RU, 2x2, 16 bits, 100MHz, 30kHz, MTU <= 9216 B, and
Quectel UE RM520N-GL Revision: RM520NGLAAR03A03M4G.
Implement TS 38.473 transparency for CellGroupConfig forwarding and handle re-establishment on a different DU
This MR implements the following fixes that are relevant in RRC
procedures (e.g. re-establishment, reconfiguration):
1. Transparent CellGroupConfig forwarding
This MR implements TS 38.473 transparency requirements by ensuring that
the CellGroupConfig IE is transparently forwarded from the gNB-DU to the
UE without any re-encoding at the gNB-CU. The CU stores and forwards the
encoded bytes transparently, while the DU is responsible for all
encoding and modifications (e.g., reestablishRLC flags). Motivation
Motivation: The 3GPP TS 38.473 specification mandates that the
CellGroupConfig IE shall be transparently signaled to the UE.
Previously, the CU was re-encoding CellGroupConfig depending on the
scenario, instead of retrieving it from the DU, violating the
transparency requirement. CU may decode for internal use but must not
re-encode for forwarding. Solution
Solution: Core Principle: The CU stores the encoded CellGroupConfig
bytes received from the DU and forwards them directly to the UE without
any re-encoding. The DU handles all encoding and modifications.
Key Changes:
1. Transparent Forwarding in RRC Reconfiguration
- Modified build_RRCReconfiguration_IEs() to use pre-encoded bytes
directly
- Changed parameter from cell_group_config to cgc (encoded byte
array with buffer and size)
2. Encoded Bytes Storage
- Added byte_array_t mcg field to RRC UE structure to store encoded
CellGroupConfig
- Added store_cgc() helper function to save encoded cell group in
the RRC UE Context at gNB (from F1AP messages)
3. DU Encoding Responsibilities
- Add gNB-DU Configuration Query IE support to trigger cgc encoding
to request CellGroupConfig from DU
- DU encodes CellGroupConfig with proper reestablishRLC flags
during re-establishment
- DU removes SRB1 from rlc-BearerToAddModList during
re-establishment (SRB1 re-establishment is done before
RRCReconfiguration)
4. New functions
- Add rrc_detect_reestablishment() function to detect
re-establishment during UE Context Modification
- Extracted rrc_gNB_first_reconfiguration_after_reestablishment()
function to handle first reconfiguration after re-establishment
- Added dump_cgc() and dump_mcg() utility functions for debugging
purposes
5. Re-establishment Flow
- rrc_gNB_process_RRCReestablishmentComplete() requests
CellGroupConfig from DU via gNB_DU_Configuration_Query in UE
Context Modification Request
- DU detects re-establishment and add reestablishRLC IEs
- CU stores encoded CGC from the UE Context Modification Response
and forwards it transparently in subsequent RRC Reconfiguration
Testing
Manual Testing:
- RRC re-establishment procedure completes successfully
- RRC Reconfiguration after re-establishment includes all DU-provided information
Issues fixed
Closes issue #837
2. Trigger UE Context Setup fallback upon reestablishment on DU
different from the original one
As per 38.401 §8.7: if the UE accesses a DU different from the original
one during re-establishment, the CU must trigger UE Context Setup toward
the new DU. This refers to steps 9-10 and steps 9’-10’. Either one or
the other can be executed during re-establishment.
e.g. if this happens during handover, it shall trigger a UE Context
Setup fallback on the CU.
This MR implements the required behavior by:
- Adding a new helper function rrc_handle_f1_ho_reestab_on_target() to
handle F1 handover reestablishment on target DU. The function triggers
UE Context Setup procedure when the UE reestablishes on the target DU
during an ongoing F1 handover.
- Calling this function when detecting that the UE is reestablishing on
the target DU during handover, i.e.: (1) from
handle_rrcReestablishmentComplete(), as per 38.401 §8.7, NOTE on steps
9-10: CU gets UL RRC MESSAGE TRANSFER from a DU different than the
original (2) from rrc_CU_process_ue_modification_required, as per
38.401 §8.7, NOTE on steps 9'-10': CU gets a UE CONTEXT MODIFICATION
REQUIRED from a DU different from the original one.
Also:
- add helper rrc_fill_f1_ue_context_setup and adopt it in handover
- move DRB list filler fill_drb_to_be_setup into rrc_gNB.c and rename it
rrc_fill_f1_drb_to_setup for consistency
See also TS 38.401 Figure 8.7-1 "RRC connection reestablishment
procedure" for reference
3. DU: Handle missing old UE context in DL RRC Message Transfer
During F1 handover reestablishment, the CU may forward a DL RRC Message
Transfer to the target DU with old_gNB_DU_ue_id included, even though
the target DU does not have the old UE context yet.
The code previously used AssertFatal when the old UE context was not
found, causing a crash: "CU claims we should know UE %04x, but we don't"
According to TS 38.473, the gNB-DU shall release the old gNB-DU UE F1AP ID only:
> if the gNB-DU identifies the UE-associated logical F1-connection If
> there is no matching connection, there is nothing to release.
Fix:
- Check if old UE context exists before accessing it
- If old UE does not exist, log error, clean up any stale F1 UE data,
and return early (do not deliver RRC message since reestablishment
can't be completed)
The goal is to address a recurrent issue in the F1 pipeline, see
jenkins-oai.eurecom.fr/job/RAN-SA-Handover-CN5G/514:
Assertion (oldUE) failed!
In dl_rrc_message_transfer() /oai-ran/openair2/LAYER2/NR_MAC_gNB/mac_rrc_dl_handler.c:956
CU claims we should know UE 35ce, but we don't
semi-manual remove of not used #define commands
As i was upset to see all these #define with no code under, i made a
global pass to remove the obvious cases semi-manual remove of not used
bodies
manual script, then a lot of manual review
grep -IRs "#define" ../openair* ../common/* ../executables/ ../nfapi/ ../radio/ | \
fgrep -v '(' | fgrep -v '//' |awk '{print $2}' | egrep -v "#define *$n"| \
while read n ; do
grep -IRs $n ../openair* ../common/* ../executables/ ../nfapi/ ../radio/ | grep -v "#define *$n" | grep -q $n || echo $n;
done
will give a decent list of #define never used. Then, I think we should
keep lists of # define when it comes from standards, even if the code
doesn't use it right now
Add Ethernet PDU session support and make PDU session request configurable
This MR adds support for Ethernet PDU sessions, and makes PDU sessions
configurable: per-PDU session ID, type (IPv4/IPv4v6/IPv6/Ethernet [1]),
DNN, NSSAI.
Concretely, it adds a new configuration file section pdu_sessions below
uicc0 that looks like this if everything is specified (default values
are shown):
uicc0:
[...]
pdu_sessions:
- id: 1
type: "IPv4"
nssai_sst: 1
nssai_sd: 0xffffff
dnn: "oai"
It is possible to list multiple PDU sessions (add new line - id: 2 to
request a second PDU session). It is backwards-compatible to the current
PDU session configuration (uicc0.dnn/nssai_sst/etc), the idea being that
either legacy or new configuration could be used, but (1) if
pdu_sessions exist, it will overwrite the legacy configuration, and (2)
multiple PDU sessions, and type, can only be configured using the new
config. The old parameters --extra-pdu-id and --default-pdu-id are not
accepted anymore. Documentation has been added to the UE tutorial.
It is possible to test an Ethernet PDU session [1]. It is possible to
test the PDU session inside the UE by verifying it has an TAP interface
oaitap_ue1, and ARPing the data network (arping has been added to
oai-nr-ue container for that purpose):
ip addr add 192.168.72.140/26 dev oaitap_ue1 # same subnet as data network!
ip link set dev oaitap_ue1 up
arping -c 20 -I oaitap_ue1 192.168.72.135 # will send ARP request in Ethernet frame to get IP address of data network
[1] See description MR !3769 for more information. On the UE side, only
the type has to be changed to "Ethernet".
The CN team would like to test the ethernet PDU session capabilities of
the UPF. Install arping in the UE by default for ubuntu to help them
test the PDU session by pinging over ARP.
Look up the index of a PDU session in the list of PDU sessions upon
accept to determine if the PDU session is the default (first PDU
session) or not. If it is the default, it will not append a suffix to
the interface name (oaitun_ueY), otherwise append the PDU session ID
(e.g., for 5: oaitun_ueYp5).
Use the new PDU session configuration functionality of the parent
commit. It is now possible to request multiple PDU sessions, and to
request specific PDU session types. While the new uicc0.pdu_sessions is
preferred, it is still possible to use the "legacy"
uicc0.dnn/nssai_sst/nssai_sd.
The old parameters --default-pdu-id and --extra-pdu-id are not allowed
anymore, as it is possible to manually define this in the UE
configuration. Correspondingly, fix the use of those options, where
applicable.
Note: since the default_pdu_id is changed to -1, all interface names
will have pX to interface names appended (oaitun_ue1pX). The next commit
will correct this.
- Remove multiple single top-level (# H1) headings per file
- Use (# H2 and ###### H6) sub-headings for consistency
- Remove any trailing # in the headings
- This ensures proper table of contents rendering in MkDocs.
- Also removed RUN_NR_multiple_BWPs.md as it is moved to MAC usage
FHI 7.2 does not have a field for the number of RACH Occasions.
It seems this needs to be manually configured, and M plane has field
num-prach-re to set the number of frequency domain PRACH occasions.
Modify all functions to also handle TAP (where applicable). The actual
TAP interface code is not used in this commit, it will be used later.
To make the interface creation stand out, make "Interface XXX
successfully configured" a LOG_A.
Simplify interface handling by storing the name: this allows to simplify
to remove_ip_if(), which does not need to recreate a valid name, and
will simplify handling of ethernet PDU sessions with a possibly
different name.
Defacto, the PDU session ID for noS1 modes is already hardcoded, as
starting the nr-softmodem with --noS1 --default-pdu-id 1 leads to
Assertion (entity != ((void *)0)) failed!
In start_sdap_tun_gnb_first_ue_default_pdu_session() openair2/SDAP/nr_sdap/nr_sdap.c:163
Further, the --default-pdu-id parameter will be deactivated in a later
commit, and we cannot rely on it. Therefore:
- hardcode noS1 PDU ID (also used in --do-ra/--phy-test modes) to 10 and
use in gNB&UE
- pass the PDU session ID used in SDAP entity initialization down to
start_sdap_tun_gnb_first_ue_default_pdu_session() to always use the
correct one
For configuring a TAP interface, we need to set different options, which
is not easily feasible with the current change_interface_state() API (or
would make it more complex). To simplify while allowing to set flags
more flexibly, separate into two functions get/set_if_flags().
We use Aerial exclusively on ARM/gracehopper, so no need to build it on
x86. On this occasion, rename the "kind" (ID which images to build) to
x86 for clarity and align with the other "kinds" (build_cross_arm,
native_armv9, ...).
While implementing NRPPA-related F1AP messages, we remarked that
extension field "UL-AoA-ExtIEs" needs to be OPTIONAL (e.g., in NRPPA it
is optional in the OAI-compiled version), but it was not marked as such.
This later version 16.21.0 fixes this.
Integration: `2026.w03`
* !3818 Update threadCreate
* !3845 Update physim timing thresholds in gNB-N300-Timing-Phytest-LDPC
* !3849 Make gpd config utility global
* !3812 Fix reestablishment after handover
* !3826 Define speed of light
* !3799 Fix for threadpool abort function
* !3791 fix array lenght errors, k variable wrapping threshold. Make the code smaller and more efficient
* !3718 Introduce SRS physical simulator and improvements
* !3857 Fix bug "no AMF for UE"
* !3858 remove function decode_cellGroupConfig
* !3668 Support beam index for LiteON FR2 RU that needs per symbol section in CP packets
* !3844 CI: Remove testcase ids from XML files
* !3620 update multi-RU 7.2 documentation for DAS scenario
* !3788 Fix handover documentation and configuration files for event configuration
See merge request oai/openairinterface5g!3854
Support beam index for LiteON FR2 RU that needs per symbol section in CP packets
This branch supports beam index for LiteOn FR2 RU and others. It adds
the support of beam index for LiteOn RU that uses per-symbol CP packet
and is a sequel of MR !3605 (merged) that supports beam index for RU
that uses per-slot CP packets.
A. To support LiteOn FR2 RU, the following are needed.
a. Per symbol beamforming. Need separate section for each symbol on CP packet.
b. Handle these two bugs:
- section ID on UP packet is set wrongly to 13 for all sections
- prach eAxC offset starts from 0 instead of from last antenna port
number used by other channels.
B. Implementation
a. set fh_config->RunSlotPrbMapBySymbolEnable based on the setting in the configuration file
- if disable, the existing per-slot scheme is run on xran.
- if enable, RunSlotPrbMapBySymbolEnable mode is on in xran so that xran
will generate PrbElm per symbol (aka total of 14)and perform
per-symbol processing on the corresponding PrbElm.
b. set fh_config->LiteOnIgnoreUPSectionIdEnable based on the setting in
the configuration file if enable, handle 2 "features" of Liteon:
- To handle the section_id = 13 issue on Liteon where section ID is set
wrongly to 13 for all sections
- To handle the prach eAxC offset issue on Liteon where it starts from 0
instead of from the end of last antenna port number
c. if fh_config->RunSlotPrbMapBySymbolEnable, OAI FHI
- invoke xran_fh_rx_read_slot_BySymbol() instead of xran_fh_rx_read_slot()
- invoke xran_fh_tx_send_slot_BySymbol() instead of xran_fh_tx_send_slot()
C. Testing
a. Command to test benetel RU
sudo LD_LIBRARY_PATH=.:$DPDK_INST/lib/x86_64-linux-gnu/ ./nr-softmodem -O /etc/ran_development/CONFs/gnb.sa.band77.273prb.fhi72.4x4-benetel550_c0.conf --thread-pool 21,22,23,24,25,26,27,28
Results:
iperf UDP uplink
[ 5] 0.00-10.22 sec 87.3 MBytes 71.6 Mbits/sec 0.100 ms 370/63081 (0.59%) receiver
iperf UDP downlink
[ 5] 0.00-10.00 sec 796 MBytes 668 Mbits/sec 0.017 ms 1824/586404 (0.31%) receiver
b. Command to test LiteOn FR2 RU
sudo LD_LIBRARY_PATH=.:$DPDK_INST/lib/x86_64-linux-gnu/ ./nr-softmodem -O /etc/ran_development/CONFs/gnb.sa.band78.66prb.fhi72.2x2-liteon-F-Release.conf--thread-pool 21,22,23,24,25,26,27,28
Result:
iperf UDP uplink
[ 5] 0.00-10.20 sec 89.9 MBytes 73.9 Mbits/sec 0.156 ms 212/64848 (0.33%) receiver
iperf UDP downlink
[ 5] 0.00-10.00 sec 361 MBytes 303 Mbits/sec 0.077 ms 277662/542891 (51%) receiver
D. Difference between LiteOn FR2 E release configuration file and that for F release is
diff gnb.sa.band78.66prb.fhi72.2x2-liteon-KB.conf gnb.sa.band78.66prb.fhi72.2x2-liteon-F-Release.conf 39d38
< beam_weights = [1, 1];
225a225
> beam_weights = [1];
312c312,313
< mtu = 1500; # check if xran uses this properly
---
> #mtu = 1500; # check if xran uses this properly
> mtu = 9000; # check if xran uses this properly
313a315,316
> RunSlotPrbMapBySymbol = 1;
> LiteOnIgnoreUPSectionId = 1;
Fix bug "no AMF for UE"
It might happen that the RRC does not know the AMF UE NGAP ID, yet. Even
in that case, we should forward the release request to the NGAP module,
which can either forward a message to the AMF, or reply back to release
the UE. This avoids an error where the CU claims there was no AMF, when
there actually is.
One possible problematic behavior is if a UE disconnects before the gNB
receives an NGAP Initial Context Setup. In this case, the AMF UE NGAP ID
was not forwarded to the RRC (although it was known at NGAP), thus
blocking the release of the UE.
This is the main fix, the rest are minor fixes:
- store AMF UE NGAP ID as early as possible
- warn in MAC if UE unknown for UE context release command
- show TEIDs with correct endianness in GTP
- avoid NG Setup Failure+Setup log.
Introduce SRS physical simulator and improvements
This MR consists of two parts:
- Introduces SRS physical simulator to test different configurations of
SRS
- Improvements in the SRS channel estimation (Addressing the comments
from old, unfinished MR !2875)
- rewrite nr_srs_channel_estimation() to loop over rx antennas and
antenna ports to be able to parallelize
- Improvements in timing_advance_offset and timing_advance_offset_nsec
computation
- Introduce SRS multi-symbol channel estimation
- The channel impulse response is estimated from the averaged
channel frequency response over multiple symbols
- The channel frequency estimates are left as they are to be able to
estimate doppler in the future
- Simplify SRS channel estimation to handle memory alignment in the
case of different SRS configurations (eg: comboffset)
To use multiple symbols when running gNB, the following parameters needs
to be edited in the function get_srs_resource()
- srs_res->resourceMapping.startPosition with a range from {0,1,..,5}
corresponds to the start symbol {13, 12, .. 8} with in a slot
- srs_res->resourceMapping.nrofSymbols indicates the number of symbols
{n1, n2, and n4}
Make sure the that start symbol + number of symbols is < 14
The timing results for SRS in develop and srs_phy_simulator are as follows:
Command used: sudo ./nr_ulsim -n1000 -s50 -S50 -R273 -W2 -y2 -z2 -E 1 -P
develop
|__ RX SRS time 124.94 us (1000 trials) (124.94 total [ms])
|__ Generate SRS sequence time 0.05 us (1000 trials) ( 0.05 total [ms])
|__ Get SRS signal time 19.41 us (1000 trials) ( 19.41 total [ms])
|__ SRS channel estimation time 89.11 us (1000 trials) ( 89.11 total [ms])
|__ SRS timing advance estimation time 13.10 us (1000 trials) ( 13.10 total [ms])
|__ SRS report TLV build time 2.80 us (1000 trials) ( 2.80 total [ms])
|__ SRS beam report build time 0.00 us ( 0 trials)
|__ SRS IQ matrix build time 2.73 us (1000 trials)
srs_phy_simulator
|__ RX SRS time 211.93 us (1000 trials) (211.93 total [ms])
|__ Generate SRS sequence time 0.04 us (1000 trials) ( 0.04 total [ms])
|__ Get SRS signal time 19.55 us (1000 trials) ( 19.55 total [ms])
|__ SRS channel estimation time 152.05 us (1000 trials) (152.05 total [ms])
|__ SRS timing advance estimation time 36.67 us (1000 trials) ( 36.67 total [ms])
|__ SRS report TLV build time 2.96 us (1000 trials) ( 2.96 total [ms])
|__ SRS beam report build time 0.00 us ( 0 trials)
|__ SRS IQ matrix build time 2.88 us (1000 trials)
Note that in srs_phy_simulator, to compute timing offset ns, an
oversampling factor of 2 is performed. Also, for peak detection, we
average the channel estimates for every port.
fix array lenght errors, k variable wrapping threshold. Make the code smaller and more efficient
generate_nr_prach() has several errors coming from replace int16_t by
c16_t, and also older error in k wrapping at the end of the symbol
the code is also ridiculously complex, wasting memory and cpu time in
intermediate useless buffers and headache usage of memmove()
On NGSetupFailure, before moving, we might have
[NGAP] Received NG setup failure for AMF... please check your parameters
[NGAP] Received NGSetupResponse from AMF
In the Initial Context Setup message, the NGAP forwards the AMF UE ID,
but not in the DL NAS Message, although 38.413 says, in $8.3.1.2 either
> The NG-RAN node shall use the AMF UE NGAP ID IE and RAN UE NGAP ID IE
> received in the INITIAL CONTEXT SETUP REQUEST message as identification
> of the logical connection
or in $8.6.2.2
> The NG-RAN node shall use the AMF UE NGAP ID IE and RAN UE NGAP ID IE
> received in the DOWNLINK NAS TRANSPORT message as identification of the
> logical connection
So forward in both cases for harmonization.
It might happen that the RRC does not know the AMF UE NGAP ID, yet. Even
in that case, we should forward the release request to the NGAP module,
which can either forward a message to the AMF, or reply back to release
the UE.
Reported-By: Jegor Zelenjak <jzelenjak@proton.me>
Make gpd config utility global
Make gpd a global utility macro for reading config/command line
parameters. Add a corresponding function with full name for clarity,
keep the short name for the macro for backward compatibility and ease of
use.
The main benefit of gpd/config_get_paramdef_from_name macro/function is
that it does not require maintaining a separate parameter index list.
Update physim timing thresholds in gNB-N300-Timing-Phytest-LDPC
The lower bound for the tests are too tight and any slight improvement
in the timing can result in a test failure. For example, these tests
were failing due to the improvements from the MR !3718
Support prach with start symbol of PRACH not at symbol 0
The following PRACH indice have been tested.
index / format (nf mod x = y) / Subframe/ start_symbol /no_of_slot / occ / duration
152 B4 2 1 4,9 0 2 1 12
151 B4 2 1 4,9 2 1 1 12
157 B4 1 0 4 0 1 1 12
159 B4 1 0 9 0 1 1 12
These files are not used anywhere. The only remaining cmake find files
are:
- findarmral and findxran: used by FHI7.2 driver
- findsctp: used by top-level CMakeLists.txt
- findgnutls: NOT actually used but GnuTLS is a dependency of websrv, so
I leave it for the moment (should be removed if the webserver is
removed)
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
There is no HSS/MME in this repository, which is the majority of this
file. Remove it, since it is outdated.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Setup routes was added by the author of FlexRAN. The UEs always set up
routes automatically, and this file is therefore not needed.
See-also: 287c182925 ("Remove FlexRAN")
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Integration: `2025.w52`
* !3809 [FHI72] Fix the PRACH FFT size
* !3829 Hotfix for handling the case where the number of physical antennas is larger than the number of logical antennas
* !3663 NR UE: calculate DL and UL Doppler based on SIB19 information in NTN mode, fixing LEO reestablishment
* !3819 CORESET start multiple of 6 fix
* !3641 automatic selection of SIB1 TDA
* !3804 gNB: apply new NR_CellGroupConfig when RRCReconfiguration is acknowledged
* !3833 Add missing CMakeLists entries for test_nr_frame_params
* !3656 Rfsimulator beam reception/transmission
Closes#1037 and #1002
See merge request oai/openairinterface5g!3830
Rfsimulator beam reception/transmission
A simplified beam switching simulation for rfsimulator. This works
mainly in 1 gNB - N UEs scenarios. This is not a real beamformer with
antenna, channel and propagation model. The way it works is that the
peers inform each other about the beams they transmit in, and on
reception before channel modelling, the beam data is combined based on
preconfigured rx_beam/tx_beam gain matrix.
Usage:
- Add --rfsimulator.enable_beams to enable beam simulation
- Add --rfsimulator.beam_gains .
Example list: 0,-5,-10
Resulting matrix:
[[0, -5, -10] [-5, 0, -5]] [-10, -5, 0]]
- Add --telnetsrv if you want to control the beams manually. The command
in telnet is "rfsimu setbeam <beam_map>", where beam_map is a uint64_t
controling the reception beam and transmission beam. If the
application is switching the beams automatically the beams will be
overwritten as soon as the application chooses to switch beams.
Supports up to 64 concurrent TX and RX beams.
gNB: apply new NR_CellGroupConfig when RRCReconfiguration is acknowledged
Currently part of the NR_CellGroupConfig is already applied when the
RRCReconfiguration message is created. This is not correct and this MR
fixes this by applying it when the RRCReconfiguration message is
acknowledged.
With this fixed, we also move disabling the feedback (in case
disable_harq is used) from the RRCSetup message to the
RRCReconfiguration message.
Closes: #1002
CORESET start multiple of 6 fix
According to the standard any CORESET (except CSET0) would always start
from the first common resource block index which is multiple of 6 in the
BWP. This was not taken into account in the code. The BWP switch CI test
is modified to test a BWP start not multiple of 6.
An exception is the case where rb-Offset-r16 parameter is set, but can't
be used at gNB for FAPI compatibility.
Closes: #1037
[FHI72] Fix the PRACH FFT size
ru_config->fftSize is used for the C-plane Section Type 3 which is
dedicated for PRACH and mixed numerology. Previously, we assumed that
PRACH FFT size is equivalent to PxSCH FFT size, but should be based on
the PRACH format.
Tests with the following RUs:
- [x] Benetel v1.2.2 & v1.4.1
- [x] VVDN Gen 3
- [x] Liteon 02.00.10
- [x] Metanoia v2.2.8 (Jura)
Fix FAPI WLS timing, UL counter, doc
- Fix FAPI WLS timing
- Fix periodical PNF UL throughput logs
- Update documentation to better explain how to run WLS with radio (USRP
B210)
Fixes for BWP switching
This MR fixes some issues when performing BWP switching via
reconfiguration. It also adds a CI test for BWP switching. # Please
enter a commit message to explain why this merge is necessary,
In all cases (CFRA in SA for HO, or CFRA in NSA/do-ra for access), the
UE has the full configuration already. We can therefore directly switch
to a dedicated search space, as it is already known to the UE.
E2SM-RC RRC message forwarding (e.g., to signal a new UE, measurement
reports, ...) was broken since commit d6c29b2d2c, as we accidentally
removed the E2_AGENT compilation definition from RRC layer.
Although this commit fixes the mentioned issue, it also causes undefined
references to functions defined in ran_func_rc.c file. Therefore, we
add a hack that provides the definition, and abort if we ever hit these
functions, which in theory should not happen.
Future cleanup should avoid linking in RRC and other layers into
simulators.
Fixes: d6c29b2d2c ("Fix E2_AGENT linking w.r.t. simulators ")
Testing has revealed that if PDCP drops some packets, the scheduler
falls behind with handling Slot.indication. It could be that we don't
have enough cores, which was reduced previously (from total 8 -> 2).
Reincrease to four cores to have a bit more headroom.
See-also: a18a4888ec ("Change number of cores used for OAI gNB from 8 to 2")
Add yq to edit yaml files and add yaml-dev library in containers missing it
- nr-cu-up and some containers were missing the yaml-config support
libraries
- yq tool is required to manipulate YAML files from within the container
for Helm charts
Robert Schmidt