Integrate channel pipeline library with vrtsim with two acceleration
options chosen at compile time:
- threadpool if CUDA support is disabled
- CUDA otherwise
- all RAN code, CI code, configuration files, dockerfiles, in CSSL v1.0
- all deployment code (openshift, charts, ancillary files like shell
scripts), in MIT
- documentation in CC-BY-4.0
- exceptions might apply and are listed in NOTICE
- there is a new LICENSES folder with all licenses
- CONTRIBUTIONS.md has been updated accordingly
For automated changes based on OAI PL v1.1:
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.{c,h,cpp}
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.ts
perl -i~ -0pe 's/<!--.*Licensed to the OpenAirInterface.*openairinterface.org\n.*-->/<!-- SPDX-License-Identifier: LicenseRef-CSSL-1.0 -->/s' **/*.xml
The rest (cmake, files with missing license, cmake) manually.
Set rxgain to 0 in vrtsim
Set rxgain to 0 in vrtsim to match rfsimulator behavior
This addresses the issue where RSRP is different between rfsim and vrtsim. With
this RSRP values between rfsim and vrtsim should be similar.
- Add num_ues and ue_id parameters for server and client configuration
- Implement ul combining and dl distribution to all ues
- Each ue uses dedicated antenna offsets based on ue_id
- Works with no-chanmod mode only and with uniform antenna dimensions across all ues
NR UE: add support for multiple RF frontends
This MR adds basic support for multiple RF-frontends at the UE.
There are multiple reasons why we might want this:
1. There might be different antennas needed for different bands (e.g. NTN or
TN antennas). These antennas might be connected to different RF-frontends.
In case of Handover, the UE needs to dynamically switch between these
RF-frontends.
2. Each rf-simulator connection carries baseband I/Q samples. To be able to
perform a handover between two cells at different frequencies, there must
be two rf-simulator connections, as the baseband channels should not
interfere and thus cannot simply be added.
3. When we want to support multiple UE simulation within one instance of
nr-uesoftmodem, and allow multiple cells and probably even handover between
these cells, we need either:
1. dedicated RF-frontends for each simulated UE, or
2. dedicated RF-frontends for each connected cell and dynamically assign
simulated UEs accordingly.
This MR implements what is needed for 1., 2. and 3.1.
Update vrtsim timing job thread
List of changes:
- avoid calculating accumulated rounding error by calculating absolute
sample index based on CLOCK_REALTIME every time.
- use threadCreate instead of plain pthread_create which assigns a unique
thread name and simplifies debugging
Fix two issues regarding vrtsims taps client implementation:
- Incorrect #define used to enable taps socket handling
- flatbuffers package name changing between ubuntu versions
List of changes:
- avoid calculating accumulated rounding error by calculating absolute
sample index based on CLOCK_REALTIME every time.
- use threadCreate instead of plain pthread_create which assigns a unique
thread name and simplifies debugging
Rfsimulator beam reception/transmission
A simplified beam switching simulation for rfsimulator. This works
mainly in 1 gNB - N UEs scenarios. This is not a real beamformer with
antenna, channel and propagation model. The way it works is that the
peers inform each other about the beams they transmit in, and on
reception before channel modelling, the beam data is combined based on
preconfigured rx_beam/tx_beam gain matrix.
Usage:
- Add --rfsimulator.enable_beams to enable beam simulation
- Add --rfsimulator.beam_gains .
Example list: 0,-5,-10
Resulting matrix:
[[0, -5, -10] [-5, 0, -5]] [-10, -5, 0]]
- Add --telnetsrv if you want to control the beams manually. The command
in telnet is "rfsimu setbeam <beam_map>", where beam_map is a uint64_t
controling the reception beam and transmission beam. If the
application is switching the beams automatically the beams will be
overwritten as soon as the application chooses to switch beams.
Supports up to 64 concurrent TX and RX beams.
In perfrom_channel_modelling, do convolution in batches which allows
vrtsim to write the channel samples as they are being produced instead
of waiting for the last sample in the slot to be ready.
Limit sample history to 256 samples and copy it into each channel modelling
task instead of relying on globally available buffer. This simplifies the code
and addressing into the saved samples buffer as well as enabling further
optimizations without sacrificing thread safety.
These libraries have an (indirect) dependency on T, either by using the
logging module (which in turn depends on T), or through other includes.
The easiest is to depend on the logging module, which will fulfil also
the T dependency.
It would equally be feasible to use the utils target (which in turn
depends on log_headers), but this would necessitate to compile, and does
not seem to be necessary.
RF emulator and improvements of the timers
RF emulator:
Add an RF library emulating a real device without the need of a real
device. This is thought to enable using phy-test without requiring a
radio device or channel simulation. The library synchronizes on the
real time clock, drops TX and generate noise on RX. Noise generation
can be disabled and the noise level configured.
Timers improvements:
- Fix standard deviation for merged timers
- Add display of ULSCH decoding timers
- Add decoding timer in AAL
Replace the unwieldy unix socket implementation of peer information
exchange with an authorative connection descriptor file that
informs the client of the connection method an number of antennas
on the server.
This allows the server to run without the client and allows the
client to reconnect as long as the server is running, as many times
as needed.
Move the channel state management outside the channel implementation.
This simplifies the channel implementation but forces users of the
channel to manage it's state manually.
Add handling for error states in vrtsim which allows to close the
softmodems with CTRL+C without hanging, improving user experience
- Client detection of stale timer.
- Abort state for client and server
Added a libary that can connect to a channel emulator and provide taps
as they are generated.
- Enable connection from vrtsim to channel emulation server
- Depends on flatbuffers definition file from raytracing-channel-emulator
- Depends on libanomsg-dev and flatbuffers-compiler (Ubuntu) or equivalent
- Added a compile time option ENABLE_TAPS_CLIENT to prevent other users
from being affected by additional dependencies
- Allow client to exit cleanly if server is down
- Ensure timing_thread is joined only once avoiding exit_function loop
- Free noise_device
- Save previously sent samples for channel modelling
Bartosz Podrygajlo