This commit introduces the following changes to ImScope:
- Added the ability to record IQ data using the same mechanism as ImScope.
- Added a new executable target `imscope_iq_file_viewer` for viewing IQ files.
- Introduced a command line argument `--imscope-record` that enables data recording mode.
- Refactored a lot of the scope code
Usage:
- To record IQ data, run a modem with `--imscope-record` flag.
The recording happens whenever a modem calls dumpScopeData, which currently is
done only in gNB on PUSCH DTX and PUSCH CRC NOK.
There is a limit of ~1GB of files written by the thread in a signle run to avoid
accidentally exhausting disk space.
If a directory `imscope-dump` is available the data will be recorded there in .imscope
files. Otherwise files are written to the directory the modem was run. This is done so that
the directory can be mapped in a docker container.
- To view recorded IQ files, use the new executable `imscope_iq_file_viewer`. This can be done by running:
```
./imscope_iq_file_viewer <path_to_iq_file>
```
Replace `<path_to_iq_file>` with the path to the IQ file you want to view.
* is_ul_slot: returns `true` for UL or mixed slots
* is_dl_slot: returns `true` for DL or mixed slots
* is_mixed_slot: returns `true` for mixed slots
These functions use the TDD slot bitmap for slot type checks
Co-authored-by: Guido Casati <guido.casati@firecell.io>
* take into account pattern2 in nr_rrc_config_dl_tda
* use get_tdd_period_idx in nr_rrc_config_ul_tda
* use get_first_ul_slot_multi_tdd in set_SR_periodandoffset
Co-authored-by: Guido Casati <guido.casati@firecell.io>
* refactor set_ideal_period to use frame_structure from MAC
* use get_ul_slot_offset to assign slot offset to nth UE and adopt in
updated config_csirs, configure_periodic_srs, set_csi_meas_periodicity
Co-authored-by: Guido Casati <guido.casati@firecell.io>
* the function is returning the index of the first full UL slot in tdd_slot_bitmap
or the first UL slot (including mixed) if the "mixed" flag is provided
* the get_ul_slot_offset function calculates the offset of the nth uplink (UL) slot for a given UE index within a TDD period
* this function uses the frame structure bitmap to determine the UL slot positions
* allocate memory for pattern2 only if the IE is present (it is optional)
* fix scc (deallocate memory) when necessary
Co-authored-by: Guido Casati <guido.casati@firecell.io>
* use config_frame_structure in config_common:
- fill frame_structure in MAC and NFAPI Config Request
- use get_tdd_period_idx to set periodicity index in Config Request
- use config_tdd_patterns to fill tdd_period_config
- use set_tdd_config_nr to complete NFAPI Config Request configuration
Co-authored-by: Guido Casati <guido.casati@firecell.io>
* assuming num_dl_slots and num_ul_slots are including also
slots with dl/ul symbols respectively
* refactor set_tdd_config_nr
* moved function to MAC
* fill max_num_of_symbol_per_slot_list depending on slot type
* use new set_tdd_config_nr in stack
* minor refactor in config.c to improve readability (scs)
Co-authored-by: Guido Casati <guido.casati@firecell.io>
* set_tdd_bmap_period, config_tdd_patterns: to configure TDD period, including bitmap, in the frame structure
* get_tdd_periodicity: to retrieve the periodicity in milliseconds for the given TDD pattern
* get_tdd_period_idx: to get the TDD period index based on pattern periodicities
* get_ul_slots_per_period: get the number of UL slots (including mixed with UL symbols) in period
* get_full_ul_slots_per_period: get the number of full UL slots in period
* get_dl_slots_per_period: get the number of DL slots (including mixed with DL symbols) in period
* get_full_dl_slots_per_period: get the number of full DL slots in period
Co-authored-by: vijay chadachan <vijay.chadachan@firecell.io>
* allocate and configure NR_PUSCH_TimeDomainResourceAllocation in a separate function
* remove duplicated lines of code
* use in nr_rrc_config_ul_tda
* use calloc_or_fail
* clang-formatted
Integration: `2025.w04`
Closes#876, #896, #875, #893, and #878
See merge request oai/openairinterface5g!3226
* !3198 remove a set of compile options that don't work anyway
* !3171 Refactor SCTP Association Response Handling and E1 connection loss at CU-UP
* !3023 usrp constant and slow derive timestamp
* !3215 Remove unused code
* !3192 fix nr phy-test mode in ntn
* !3214 fix(nrLDPC_coding_t2): Miscellaneous fixes related to T2
* !3020 use ML receiver for 64 QAM UL-MIMO
* Demote error logs to debug for "PUCCH not processed"
* !3217 minor improvements in T hacks
* !3199 Add a small FAPI Hex parser utility
* !3209 Remove most of m64 type usage
* !3211 Avoid huge calloc by alloc'ing TBs independently
* !3212 F1AP IDs: Allow AddMod, fix concurrency bug
* !3152 E1 Setup enc/dec library and unit test
* !2999 Repair nFAPI in 5G
* !3210 FHI72: FDD support
* !3220 Improve RA logs
Improve RA logs
Modify existing LOG entries to include preamble index, timing advance and
estimated distance from the gNB. This makes mapping RA attempts to
physical/simulated UEs easier via sent/received preamble index or physical
distance from the gNB in scenarios with >1 UE.
FHI72: FDD support
- harmonize DL/UL PRB mapping in one get_xran_prb_map() function with support
of mixed slot and duplex mode
- do not assume TDD by default
Repair nFAPI in 5G
Add 5G nFAPI in OAI/Make it it work.
Many commits in this branch are basically bug fixes of things that don't work
properly, such as
- check for correct conditions (e.g. instance numbers in the RAN context)
- remove artificial limitation (e.g. only one PUCCH per TDD period in the PNF)
- improve performance (reduce big mallocs, make some static buffers such as a
global ring buffer for nFAPI messages in the PNF)
- fix bugs in nFAPI (e.g., increase maximum message size to ~64kB instead of
1500 bytes, because the latter is way too small for many TX_data.requests in
5G, and it will delay message arrival unduly)
- fix bugs in message enc/dec (e.g., handle FDD in config.request)
- adjust the L1 such that the condition "we run monolithic" is not necessery
(e.g., some message numbers in nFAPI struct where reset in MAC, instead of
L1, and this breaks when running the PNF)
There are instructions that explain how to set it up. Two CI tests have been
added, one with COTS UE and MIMO in DL+UL in TDD numerology 1 (30kHz), and a
second test with FDD mu=0 (15kHZ) in RFsimulator.
These were some old to-dos that have been addressed.
- test with COTS UE - 4x4 pipeline works good in DL, UL now also work
- test in RFsim
- make PNF status message
- make FDD in u0 work
This function packs P7 messages. At least RX_data.indication messages
might be much bigger than the global buffer that is used here. Allocate
the buffer on the stack, and make it bigger. Do not use the global
buffer, it's simply not necessary; increasing the global tx buffer size
might have negative effects elsewhere in the code.
That change might make the function reentrant. The mutex seems to only
guards the codec config. However, leave it to not introduce any
regressions as of now.
E1 Setup enc/dec library and unit test
This MR is adding a library for E1 Setup enc/dec functions:
- E1 CU-UP Setup Request
- E1 CU-UP Setup Response
- E1 Setup Failure
and relevant unit tests
F1AP IDs: Add update, fix concurrency bug
I suspect a concurrency bug: For instance, during reestablishment, the
CU needs to update the DU UE ID under which the UE is identified in the
DU. Previously, the CU would remove, then add the DU UE ID info. At the
same time, the PDCP thread might look up the information. This can lead
to asserts. Modify the code to do the update under (one) lock.
Also, refactor some code.
Similar to the parent commit, make the numerology in the VNF
configurable. Unlike for the PNF change, the VNF frame/slot info is in a
per-PNF connection structure to which the "oai_integration" code has no
access. So we need to hack the nfapi_vnf_p7_add_pnf() function signature
to take the numerology, to be able to save this on a per-PNF basis.
The fact that we store this on a per-PNF basis is not strictly required,
as the VNF cannot handle multiple numerologies as of now, either.
However, we might want to extend this in the future, so it seems prudent
to store this on a per-PNF basis, so that we could start handling
multiple numerologies at the L2 without the need to change the L1 or
nFAPI code itself.
Also, the numerology is not needed except for some code that deals with
timing over nFAPI. As of now, we don't use this code (nFAPI gets a
trigger every slot, as per the VNF request, see an earlier commit in
this series), but also here, let's not make the future more complicated
by storing the numerology for each PNF now (this could always be reverted).
For 4G, put numerology 0 (15kHZ SCS), which is the SCS that LTE uses.
Fill in the dynamically received numerology, and make the numerology at
the PNF configurable, following the changes in the parent commit.
The change for the reading is somewhat of a hack, because nFAPI, as of
now, does not really foresee to store the numerology, so we fill the
numerology during the start request, when the numerlogy has been
received in the config request, but at that time, the structure for the
time information (frame/slot) does not exist yet.
At both the PNF and the VNF, introduce a separate numerology field, and
pass the numerology when converting time information using macros from
nfapi_interface.h. The actually numerology is still hardcoded to 1 (as it
was before), but the follow-up commits will put a suitable numerology.
In both cases, but the numerology next to the frame/slot information.
Similar as the parent comment, remove time macros. In this particular
case, we can just pass the exact frame/slot information, instead of
squeezing it in a single integer.
The next commits will modify the time macros used in the 5G nFAPI code
to handle different numerologies. As a preparation, remove all the
usages of these macros where they really don't matter (e.g., don't
convert if we don't need to).
Bartosz Podrygajlo