Remove L1 dependence from NR band number
L1 band information relied on get_band function that couldn't provide an
unambiguous result. Also there is no SCF compliant parameter for L1 and
generally we don't really need that information in L1.
The MR also remove a RU section that used nr_band but was never really
accessed in NR.
Add missing packing for CONFIG.request parameter BetaPSS
Adds the packing procedure for the parameter BetaPSS, as well as adding this
parameter to the utility functions where it is missing
IPV6 support for telnet socket binding
Now, the listening telnet socket is only bound to the dedicated interface IPs in
config file, both for V4 and V6
Closes#834
Fix handling of IPv4v6 PDU sessions
The code previously checked that the supplied PDU sessions's type is
exactly what we requested. However, at least OAI 5GC will only give us
an IPv4 PDU session if we request IPv4v6 (so the check would fail).
Extend the validation to either check exact match, or, if IPv4v6
requested, that it is either IPv4 or IPv6.
Fix error
openair1/SIMULATION/NR_PHY/dlsim.c:1057:37: runtime error: member access within misaligned address 0x7f8a67e01010 for type 'struct NR_Sched_Rsp_t', which requires 32 byte alignment
Prior to this commit, constants NB_ANTENNAS_RX/TX are provided on the
command line to each compiler invocation. This has the drawback (1) that
also files that don't need that get the constants, and (2) it is not
easy to find them using ctags or similar, as the only definition is in
CMakeLists.txt (where it is not found).
In this commit, use cmake configure_file() to write a header file with
these constants. The file will be generated during cmake invocation, and
written to <build-dir>/common/cmake_defs.h. The relevant files that
need this definition will pick it from the header.
This has been used previously also in a commit to write git information.
See-also: 8bffd1666d ("Avoid complete rebuild on cmake run with git info change")
fix: removed the nssai_sd parameter in the ue.conf file
Following the tutorial in the RF simulator, the PDU session cannot
be established because the Slice Differentiator to request(nssai_sd)
parameter in the ue.conf file is 1(integer) but in the documentation
the default value of the nssai_sd is 0xFFFFF(meaning "no SD")
Now the nssai_sd parameter is removed in the ue.conf to establish the
PDU session.
NR UE: correctly compute writeTimestamp for SCS > 30 kHz with rf-simulator
Contains also two minor cleanups for nr-ue.c:
- make fp point to constant NR_DL_FRAME_PARMS where possible
- use c16_t type for I/Q sample arrays
print better message for rsrp: invalid doesn't mean it is not measured
print better message for rsrp: invalid doesn't mean it is not measured,
it means it is out of usable range
NR UE: fix PRACH k1 calculation at MAC when handover
The k1 for PRACH calculation in config_common_ue() should be the same as in
config_common_ue_sa(), otherwise k1 is wrong when handover to target cell if
msg1-FDM not 0 in reconfigurationWithSync.
Verified with 3rd-party gNB.
The code previously checked that the supplied PDU sessions's type is
exactly what we requested. However, at least OAI 5GC will only give us
an IPv4 PDU session if we request IPv4v6 (so the check would fail).
Extend the validation to either check exact match, or, if IPv4v6
requested, that it is either IPv4 or IPv6.
Following the tutorial in the RF simulator, the PDU session cannot
be established because the Slice Differentiator to request(nssai_sd)
parameter in the ue.conf file is 1(integer) but in the documentation
the default value of the nssai_sd is 0xFFFFF(meaning "no SD")
Now the nssai_sd parameter is removed in the ue.conf to establish the
PDU session.
gNB: Reset NDI only after usage in case of disable HARQ
Solves this warnings seen in the UE trace:
NDI indicates re-transmission but computed TBS 3968 doesn't match with what previously stored 3368
Issue happens only if feature disable_harq is enabled. GNB resets the harq
process (including NDI) as PUCCH will not be sent for this harq process, but
before the harq process is used in DCI payload preparation.
Fix is to reset the harq process after harq process in case of no PUCCH.
Fail early if configuration module can not initialize properly
In the case that the config module cannot load the driver for libconfig or yaml,
currently, there might be a cascade of errors that are difficult for users to
understand. For instance (partially redacted for clarity):
[CONFIG] Error calling dlopen(libparams_libconfig.so): libparams_libconfig.so: cannot open shared object file: No such file or directory
[CONFIG] config module "libconfig" couldn't be loaded
[CONFIG] config_get, section log_config skipped, config module not properly initialized
[LOG] init aborted, configuration couldn't be performed
[CONFIG] config_get, section (null) skipped, config module not properly initialized
[CONFIG] /home/francesco/openairinterface5g/common/config/config_userapi.c 68 nfapi has no processed integer availablle
[CONFIG] config_get, section (null) skipped, config module not properly initialized
Assertion (get_softmodem_params()->default_pdu_session_id == -1) failed!
In get_common_options() /home/francesco/openairinterface5g/executables/softmodem-common.c:161
Use uicc0.pdu_sessions.[0].id to change the requested PDU session ID (is 0)
Here, the error is the missing shared object, but a user is more likely to look
at the last error instead of the first.
This commit addresses it by checking early for CONFIG_ISFLAGSET(CONFIG_ABORT),
and stopping if it is set. Additionally changes include making functions static,
removing late CONFIG_ISFLAGSET() checks, and the CONFIG_ISFLAGSET() in
load_configmodule(), because at that time "uniqCfg" is not set yet and thus does
not do anything (this is likely a regression of an earlier cleanup).
See-also: f50d5f5a ("make multiple config instead of one implicit global")
Integration: `2026.w08`
* !3934 Fix Ubuntu build: reinstate -Werror
* !3803 remove cblas and atlas dependancy
* !3918 Add a simple GTP unit test
* !3924 T: macpdu2wireshark: gentle exit (and some other minor work in the T tracer)
* !3925 Fix race condition on double RA during RRC reestablishment
* !3930 bugfix: add PCell to serving_cells in fallback path and refactor update logic
* !3936 [FHI72] Remove support for xran E release
* !3893 NR Paging on CU
See merge request oai/openairinterface5g!3939
In the case that the config module cannot load the driver for libconfig
or yaml, currently, there might be a cascade of errors that are
difficult for users to understand. For instance (partially redacted for
clarity):
[CONFIG] Error calling dlopen(libparams_libconfig.so): libparams_libconfig.so: cannot open shared object file: No such file or directory
[CONFIG] config module "libconfig" couldn't be loaded
[CONFIG] config_get, section log_config skipped, config module not properly initialized
[LOG] init aborted, configuration couldn't be performed
[CONFIG] config_get, section (null) skipped, config module not properly initialized
[CONFIG] /home/francesco/openairinterface5g/common/config/config_userapi.c 68 nfapi has no processed integer availablle
[CONFIG] config_get, section (null) skipped, config module not properly initialized
Assertion (get_softmodem_params()->default_pdu_session_id == -1) failed!
In get_common_options() /home/francesco/openairinterface5g/executables/softmodem-common.c:161
Use uicc0.pdu_sessions.[0].id to change the requested PDU session ID (is 0)
Here, the error is the missing shared object, but a user is more likely
to look at the last error instead of the first.
This commit addresses it by checking early for
CONFIG_ISFLAGSET(CONFIG_ABORT), and stopping if it is set. Additionally
changes include making functions static, removing late
CONFIG_ISFLAGSET() checks, and the CONFIG_ISFLAGSET() in
load_configmodule(), because at that time "uniqCfg" is not set yet and
thus does not do anything (this is likely a regression of an earlier
cleanup).
See-also: f50d5f5a9b ("make multiple config instead of one implicit
global")
NR Paging on CU
Implements the NR paging path on the CU:
- NGAP Paging is decoded and passed to RRC
- RRC builds F1AP Paging, and distributes it to DUs via F1 callback
Changes:
- Refactor and extend F1AP Paging encode/decode libraries
* add missing enc/dec/eq/cp functions
* add unit test
* IEs: CN UE 5G-S-TMSI, RAN UE I-RNTI; optional DRX/priority/origin)
- Refactor CU callback CU_send_Paging
- Refactor DU handler DU_handle_Paging
- Refactor old F1 callback for Paging indication, extend it and align
with existing F1 callbacks in stack
- Refactor and extend NGAP Paging encode/decode lib
* add missing enc/dec/eq/cp functions
* add unit test
* Fixes NGAP paging to accept Paging only on SCTP stream 0 per TS
38.412
- Includes supporting refactors (PDU session split, shared 5G-S-TMSI
helpers, NGAP/F1AP cleanups)
Testing
- NGAP and F1AP Paging lib unit tests (enc/dec)
- Stream-0 fix validated with Open5GS AMF
This MR does not address the DU changes besides the F1 handler. F1AP
Paging does not have an RRC container to pass the PCCH message to the
DU, and F1 DL RRC Message Transfer does not apply to PCCH. PCCH-Message
shall be built at DU per TS 38.331 §5.3.2, with padding as per §8.5 and
delivered as RLC SDU per §8.2. For each cell in Paging Cell List that
belongs to this DU, queue for MAC. MAC schedules at PF/PO per TS 38.304
§7.
Refs:
- F1AP 3GPP TS 38.473 version 16.21.0 Release 16
- NGAP 3GPP TS 38.413 version 16.17.0 Release 16
[FHI72] Remove support for xran E release
All the use cases we tested with E release are working end-to-end with F release.
The near future plan is to support K release which is ongoing in the MR !3444.
bugfix: add PCell to serving_cells in fallback path and refactor update logic
Fix assertion failure in rrc_gNB_send_NGAP_NAS_FIRST_REQ() when RRC
Reestablishment falls back to RRC Setup. The fallback path was not
adding the PCell to the UE's serving_cells array, causing
rrc_get_pcell_for_ue() to return NULL.
Major changes:
- Add rrc_update_ue_pcell() helper function that handles PCell updates
for both new UEs (fallback) and existing UEs (normal reestablishment)
- Refactor normal reestablishment path to use rrc_update_ue_pcell()
helper instead of manual cleanup + add sequence
- Add PCell update to fallback_rrc_setup path using the same helper
- Move C-RNTI validation after current_cell fetch to ensure current_cell
is initialized before fallback_rrc_setup label
- Change error handling: return instead of fallback when PCell add fails
in normal reestablishment path
Fixes CI failure in !3908
All the use cases we tested so far, are supported with xran F release.
Therefore, we can proceed with removing the support with E release.
In addition, our plan is to bring the support for K release which is ongoing activity in
the MR https://gitlab.eurecom.fr/oai/openairinterface5g/-/merge_requests/3444.
Fix race condition on double RA during RRC reestablishment
Sometimes, especially in poor channel conditions, a UE can trigger
multiple RA procedures during RRC reestablishment, causing
reconfigCellGroup to be overwritten with a CellGroup that already has
spCellConfig removed, leading to an assertion failure in
update_cellgroup_for_reestablishment(). See logs below
[NR_MAC] 456.13 UE 991d: Received Ack of Msg4. CBRA procedure succeeded (UE Connected)
[NR_MAC] Adding new UE context with RNTI 0x991d
[NR_PHY] [RAPROC] 461.9 Initiating RA procedure with preamble 8, energy 48.0 dB (I0 274, thres 130), delay 21 start symbol 2 freq index 0
[NR_MAC] 461.9 UE RA-RNTI 0081 TC-RNTI ecd8: initiating RA procedure
[NR_MAC] UE ecd8: Sync beam index 0
[NR_MAC] UE ecd8: Msg3 scheduled at 462.3 (461.18 TDA 2) start 0 RBs 8
[NR_MAC] UE ecd8: 461.18 Generating RA-Msg2 DCI, RA RNTI 0x81, state 1, preamble_index(RAPID) 8, timing_offset = 21 (estimated distance 820.3 [m])
[NR_MAC] 462. 3 PUSCH with TC_RNTI 0xecd8 received correctly
[NR_MAC] Received a MAC CE for C-RNTI with 991d
[NR_MAC] Remove NR rnti 0xecd8
[NR_MAC] 462. 3 RA with C-RNTI 991d complete
[NR_PHY] [RAPROC] 471.19 Initiating RA procedure with preamble 6, energy 51.0 dB (I0 276, thres 130), delay 21 start symbol 2 freq index 0
[NR_MAC] 471.19 UE RA-RNTI 010d TC-RNTI 022d: initiating RA procedure
[NR_MAC] UE 022d: Sync beam index 0
[NR_MAC] UE 022d: Msg3 scheduled at 472.13 (472.8 TDA 2) start 0 RBs 8
[NR_MAC] UE 022d: 472.8 Generating RA-Msg2 DCI, RA RNTI 0x10d, state 1, preamble_index(RAPID) 6, timing_offset = 21 (estimated distance 820.3 [m])
[NR_MAC] 472.13 PUSCH with TC_RNTI 0x022d received correctly
[NR_MAC] Received a MAC CE for C-RNTI with 991d
[NR_MAC] Remove NR rnti 0x022d
[NR_MAC] 472.13 RA with C-RNTI 991d complete
[NR_RRC] [UL] (cellID 1, UE ID 1 RNTI 991d) Received RRCReestablishmentComplete
[NR_RRC] UE 1 Processing NR_RRCReestablishmentComplete from UE
[NR_MAC] UE 991d: gNB-DU Configuration Query received, will include CellGroupConfig in response
Assertion (new_CellGroup->spCellConfig) failed!
In update_cellgroup_for_reestablishment() /phy/openairinterface5g/openair2/LAYER2/NR_MAC_gNB/mac_rrc_dl_handler.c:666
This MR solves it by skipping the reconfigCellGroup overwrite when it
already holds a valid config with spCellConfig, and by replacing the
fatal assertion on missing spCellConfig with an early return.
T: macpdu2wireshark: gentle exit (and some other minor work in the T tracer)
When outputting to a file, typing ctrl+c exits the program without
calling fclose(), leading to loss of traces in the output file.
Let's intercept ctrl+c and exit gently, calling fclose().
Also include a small fix for compilation of _check_vcd, some work on
extract and hacks/plot-ofdm, minor stuff.
Robert Schmidt