Add vvdn-activate-carriers.sh to verify RU PTP synchronization and
configuration. Activates carriers on VVDN RU by editing sysrepo running
datastore (INACTIVE->ACTIVE).
Add vvdn-inactive-carriers.sh to reverse the operation, setting all
carriers back to INACTIVE via sysrepocfg.
Retx check frequently fails in OTA pipelines, particularly for interfering
UEs attempting to connect to the cell. This leads to job failures in OTA
pipelines.
Remove the retx check from Multi-Antenna and Aerial pipelines to improve
CI stability and avoid false failures. In these pipelines, iperf test
already validates correct funtionality, making the retx check redundant.
Integration `2026.w16`
* !4040 fix: issue 911 - replace timer oneshot to periodic.
* !4041 Compilation without T: move to physims
* !4046 fix(record_db doc): correct the path for T_messages.txt and mention use of ninja/make
* !3994 Update CN5G images to release v2.2.0 and update traffic generator image
* !4024 Fix fill_srs_channel_matrix
* !3983 Add SIB 3,4 support, configurable SIB2 and refactor CU/DU SIB management
* !4030 Miscellaneous code improvements
* !4039 Verify consistency of CSI report in L2 instead of RRC
* !3991 L1 RX: use queues instead of arrays and linear search for PUCCH, PUSCH, SRS, PRACH
* !4011 CI: remove cppcheck, cleanup in build and license checks
* !4051 Fix EMA cold-start for noise and SNR/RSSI measurements
Closes#1063
See merge request oai/openairinterface5g!4048
Fix EMA cold-start for noise and SNR/RSSI measurements
Initialize n0_subband_power and power control avg_snr/avg_rssi directly
from the first measurement instead of starting from zero.
Starting from zero causes the EMA to converge slowly, leading to
underestimated noise power at gNB startup. This results in inflated SNR
estimates, which triggers UE uplink power ramp-up, antenna saturation,
and a positive feedback loop of increasing noise.
CI: remove cppcheck, cleanup in build and license checks
Remove cppcheck. For those who want to use it, it's now in tools/cppcheck/,
and likely easier to use locally.
Clean up some code for CI build and license check. Remove global variable.
Fix fill_srs_channel_matrix
Fix incorrect SRS subcarrier mapping in fill_srs_channel_matrix
The previous implementation of fill_srs_channel_matrix assumed an incorrect
SRS subcarrier mapping, leading to wrong indexing of the estimated channel
in frequency domain.
Update CN5G images to release v2.2.1 and update traffic generator image
- Updated all CN5G image tags to v2.2.1
- Updated image oaisoftwarealliance/trf-gen-cn5g to latest tag supporting
multi-architecture platforms See here
- Enabled iperf3 server in daemon mode in oai-ext-dn
- Handover: Since MR oai/cn5g/oai-cn5g-amf!372 has been merged, the AMF
image tag is updated to the latest release v2.2.1
- upgrade MySQL image to 9.6
fix(record_db doc): correct the path for T_messages.txt and mention use of ninja/make
The commit !4038 (51d84419) provided the wrong path for T_messages.txt. The path
it provided holds if the T tracer is built manually using make.
A note to explicitly mention the path for T_messages.txt when T tracer is built
using make.
Signed-off-by: Sagar Arora sagar.arora@openairinterface.org
fix: issue 911 - replace timer oneshot to periodic.
Updated SCTP reconnect timer from TIMER_ONE_SHOT to TIMER_PERIODIC so gNB
continuously retries AMF lookup every 30 seconds after disconnect.
Timer is now removed only when ngap_amf_associated_nb > 0, AMF association
is actually back.
Integration `2026.w15`
* !4014 Microamp FR2 configuration file and documentation
* !4029 nr rlc: tolerate bogus data
* !4032 build_oai fixes: harmonize duplicate options, remove wrong --build-lib handling
* !3977 Further unused arguments cleanup
* !4009 Fix for NULL pucch-ResourceCommon at MSG4
* !4037 Increase reliability of ltebox start
* !4034 Prevent infinite loop on Single Entry PHR handling
* !4038 doc(record_db): explain how to use record_db
* fix compilation of T tracers with 'make'
* !3489 Thread-pool support for TX symbol processing.
See merge request oai/openairinterface5g!4033
Thread-pool support for TX symbol processing.
This MR adds thread-pool support for TX symbol processing. It allows modulation
/mapping/layer-precoding to run in parallel and offers a speedup of around 3
compared to single-thread execution. This is particularly important for large
bandwidths and 4 or more TX antenna ports where the precoding operation is quite
computationally-intensive.
Please see the description of !3489 for the performance comparison results and
the nr_dlsim timing measurements.
Increase reliability of ltebox start
The existing ltebox startup sequence on nepes occasionally fails. Running
sudo su -c 'screen -dm -S simulated_hss /opt/hss_sim0609/starthss' \
&& sleep 1 && sudo /opt/ltebox/tools/start_mme && sudo /opt/ltebox/tools/start_xGw \
& sleep 1 && ip a show dev tun1
Reliably shows that no tun1 interface is created, because that takes around
1s itself. Increasing the second sleep to 2 reliably deploys it correctly.
Do the same for sabox and ltebox on nano for consistency.
Fix for NULL pucch-ResourceCommon at MSG4
Field pucch-ResourceCommon, used for ACK of MSG4, in some scenarios was
overwritten by RRCSetup before being used. Storing it in advance prevents
the segfault. In addition there is a clenaup of similar procedures at gNB.
Further unused arguments cleanup
More fixes for unused function arguments (see #1057),
add_compile_options(-Wunused-parameter) added in folders:
- nfapi
- openair2
- openair3
- USRP
- rfsimulator
build_oai fixes: harmonize duplicate options, remove wrong --build-lib handling
Correctly handle --build-lib such that missing arguments are still handled
properly. Harmonize, and remove useless code.
nr rlc: tolerate bogus data
Some unfriendly entity may play with the RLC module and send bogus data to
trigger funky behaviors here and there.
A report sent by Dhanish indentifies one such issue.
From analyzing this report, a possible scenario is the following. Unfriendly
entity sends an RLC PDU with: is_first=0 is_last=0 so=15 lenght of data,
whatever, let's say 1.
This PDU is put in the RX list.
Then later it sends another PDU (for the same SN, obviously), with: is_first=1
is_last=1 so=0 (well, since is_first=1, necessarily so=0; it is not transmitted,
see 38.322 6.2.2.3 for UM and 38.322 6.2.2.4 for AM) length=10, let's say.
This PDU is also put in the RX list, before the previous one.
Then the function sdu_full() returns 1, so reassemble_and_deliver() is called
and the 'while (pdu)' loop is executed for both PDUs. When the second (bogus
one) is processed, so==10 (after processing the first PDU) and the line: int
len = pdu->size - (so - pdu->so) is: int len = 1 - (10 - 15) which is not good.
So we detect the case 'pdu->so > so' and reject the SDU. We could label the
other entity as bogus, since no standard RLC implementation will produce such a
case, but let's remain friendly, even with unfriendly entities. (To be changed
later if needed.)
The problem was reported for RLC AM but is also present in RLC UM. (Not in RLC
TM, where there is no segmentation.) Note: according to the report, this bug was
found using a fuzzer described as 'AI-assisted custom 5G NR protocol fuzzer'. It
had to be said.
CI: Add stage to push to local git repository
This MR includes minor code cleanup and fixes for warnings reported by Jenkins.
It also introduces a new stage in ci-scripts/Jenkinsfile-GitLab-Container that
pushes the branch to a local repository after the merge. In a follow-up MR,
this local repository will be used as the source for cloning the branch,
replacing direct access to GitLab/GitHub.
Did you forget the `def` keyword? WorkflowScript seems to be setting a field named JOB_TIMESTAMP (to a value of type String) which could lead to memory leaks or other issues.
Did you forget the `def` keyword? WorkflowScript seems to be setting a field named MR_NUMBER (to a value of type String) which could lead to memory leaks or other issues.
Cleanup common_lib.h
This change reduces the number of dependecies of common_lib.h and simplifies
the task of implementing an external OAI radio library.
Declare `localStatus` and `localResult` as local variables in `triggerSlaveJob`
and `triggerCN5GSlaveJob` functions by adding `def`.
This prevents unintended use of global variables in pipeline and avoids
potential variable leakage or conflicts between stages.
Follows the Jenkins recommendation:
Did you forget the `def` keyword? WorkflowScript seems to be setting a field named localStatus (to a value of type RunWrapper) which could lead to memory leaks or other issues.
Did you forget the `def` keyword? WorkflowScript seems to be setting a field named localResult (to a value of type String) which could lead to memory leaks or other issues.
- remove test_multipath and test_noise from ChanelSim tests of
RAN-Channel-Simulation pipeline - will be executed together with the
other CUDA-enabled unit tests
- enable configurable dockerfile, runtime-opt, and ctest-opt parameters in
the XML file for the Build_Run_Tests step
- pass runtime options to `docker run` to support ctest execution with CUDA
- allow additional ctest options for selective test execution and labeling
- add benchmark_channel_pipeline to CTest
- add test_channel_pipeline to CTest
- add `cuda` label to CUDA-dependent tests for easier execution and
filtering
This change removes the cudaDevAttrIntegrated check and only requires
pageable memory access. This change allows to run GPU accelerated
channel convolution on GH machines.
Update doc: split RUNMODEM.md, clarify USRP-specific workarounds
This reworks the documentation:
- split up RUNMODEM.md into separate documents for gNB, UE, NTN
- explains USRP workaround and patches
- makes a standalone UE doc file that explains UE-specific configuration
& modes
- better explains physical simulators
- adds a document on tracy
- cleanup
More compilation improvements
Mostly to decouple NR files from LTE headers.
At least in one instance, ulsch_input_buffer_array, using an LTE constant in
NR code was quite dangerous because the buffer in NR could easily be larger
than what the LTE constant foresee.
UE: Fix CSI RS Measurement
1. Fix regression introduced in !3834.
2. ZMQ has no interference or artificial noise so the interference plus noise
measured is always 0. nr_csi_rs_pmi_estimation() returns SINR as 0 if noise
is 0 which reports CQI as 0. This fix computes SINR if noise is 0 instead of
returning.
UE: Implement SUCI Profile Scheme A
This MR modifies the nrUE to support Profile Scheme A based SUCI generation as
outlined in TS 33.501 §C.3 Elliptic Curve Integrated Encryption Scheme (ECIES),
this further extends SUCI generation, which currently only supports the NULL
Scheme.
Changes:
- Extend UICC structure for SUCI parameters.
- Add cryptographic primitives (Curve25519, X9.63 KDF).
- Add an abstracted function to transfer digit strings into their corresponding
BCD value.
- Updates SUCI generation to support Profile Scheme A.
- Updates NAS SUCI encoding to support hexadecimal cryptographic output in
addition to BCD encoded MSINs.
Notes:
When a configuration file specifies an unsupported Profile Scheme, the NAS layer
triggers a fatal error. This occurs either because Profile Scheme B is
unimplemented or the build uses OpenSSL < 3.0, which lacks Curve25519 and X9.63
KDF support, ensuring users are informed of the incompatibility. Support for
Profile Scheme B (TS 33.501 §C.3.4.2 Profile B) can be implemented at a later
stage using P-256-based encryption.
The implementation of SUCI Profile Scheme A was tested against Open5GS’s core
implementation. OpenAirInterface’s cn5G does not yet support Scheme A and should
be extended to include it in a future update.
This allows to compile physical simulators by compiling only tests with
"ninja tests". It fixes a regression.
Fixes: ec8efe1b7e ("Unify physim test definition")
hotfix for 4 layer mapping on aarch64
This hotfix fixes a small bug appearing on aarch64 in the 4-layer PDSCH mapping
function. It was an error in the original implemntation.
Integration `2026.w13`
* !4004 Remove OSD, some scripts, oaisim references
* !3968 Fix DAS via index based beamforming
* !3982 UE: update pdcch config only after mib read
* !3851 Bugfix in UE DLSCH LLR functions
* !3933 mac: fixes to prevent prb overlapping
* !4006 Update cir-generator image tag to v0.0.1
* !4007 Remove old CUDA LDPC implementation
* !4005 FHI72: handle more than 64 cores
* !3805 \[E2 agent\] Refactor E2SM-KPM and implement support for REPORT style 1
* !3973 Introduce UE NAS Simulator
* !3966 PUCCH Format 1 decoder implementation and validation with nr_pucchsim
* !3681 Configure DigitalBeamTable in OAI and pass down to Aerial L1
* !3912 Fix Delta MCS mode, reimplement UL power control
* CI: Tune VNF configuration files in Aerial pipeline
Closes#1044
See merge request oai/openairinterface5g!4008
Adjust target SNR values and introduce RSSI thresholds in the VNF configuration
files to prevent UL saturation. These changes improve uplink stability and
performance for tests with Aerial and WNC RU.
Fix Delta MCS mode, reimplement UL power control
This change set fixes the "delta-MCS" mode, and reimplements the UL power
control loops at gNB, i.e., for PUSCH and PUCCH. It further adds new T traces
to log PUSCH/PUCCH power infrmation, and cleans up code.
The "delta-MCS" mode in OAI refers to configuring a UE with deltaMCS in the
PUSCH-PowerControl IE (see TS 38.331). In this mode, the UE adjusts the PUSCH
power for transmissions to take into account for MCS (see TS 38.213 Sec. 7.1).
In other words, the target SNR can be set to a somewhat low value, and the UE
will still use the right power for UL transmissions. Note that the spec only
foresees this adjustment of UL power when using one layer. In contrast, in the
"normal" mode, the gNB sends TPC commands to keep a UE at a fixed target SNR
(default: 20dB), regardless of the MCS or number of layers. Future work is
planned to completely remove this fixed target SNR, which is not done in this
MR yet.
Further, there is a new power control loop implementation. Prior to this MR, on
each UL transmissions, the gNB uses the SNR to decide about TPC sent to a UE in
the next transmissions. The new implementation relies on averaging the SNR, and
a "TPC in flight" average to account for the slow reaction of the average SNR.
The sum of both quantities is the current SNR that is used by the UE. See the
commit messages or documentation for more information.
Further cleanup to group data (e.g., power control configuration, refactoring of
code to save space, ...) is done. Two new T traces GNB_MAC_PUSCH_POWER_CONTROL
and GNB_MAC_PUCCH_POWER_CONTROL are added; documentation exists to explain how
to graphically plot corresponding graphs.
Configure DigitalBeamTable in OAI and pass down to Aerial L1
With this MR it will be possible to define a Beamtable in OAI and pass it down
to a L1 (Aerial or OAI) which then will either use them locally to apply
static beamforming (Split 8 with USRP) or pass them down to the RU using 7.2
split with Section Extension 1.
PUCCH Format 1 decoder implementation and validation with nr_pucchsim
This is the implementation of the PUCCH Format 1 decoder, validated with
pucchsim in the current branch.
Build:
./build_oai --nrUE --gNB --ninja --phy_simulators
Run tests:
ctest -L nr_pucchsim -j 8
Introduce UE NAS Simulator
This MR introduces a simple standalone tester for 5G UE NAS signaling and NGAP
messages. It connects to the AMF to perform NGAP and NAS encoding/decoding and
validates the UE Registration and PDU Session Establishment processes without
the overhead of a full Radio Access Network (PHY/MAC/RLC).
The motivation for this tester is as follows,
- This tester is a lightweight, deterministic tool to test the UE NAS layer
directly.
- Developers can easily inject specific NAS messages depending on the use-case.
- Developers can validate custom NAS/NGAP messages without the need to implement
complete RRC/MAC etc procedures.
Start the 5G Core network to test the UE NAS simulator. The compiling and
testing procedure is described below.
To compile:
mkdir build && cd build && cmake .. -GNinja && ninja nr-ue-nas-simulator-test
To run:
LD_LIBRARY_PATH=. ./tests/nr-ue-nas-simulator/nr-ue-nas-simulator-test -O ../tests/nr-ue-nas-simulator/test.conf
[E2 agent] Refactor E2SM-KPM and implement support for REPORT style 1
- Refactor E2SM-KPM to:
- better handle different supported REPORT styles needed for "E2 Setup
Request"
- pass "Measurement Label" for calculating the measurement values
- Implement Subscription for E2SM-KPM REPORT style 1 and fill the PDSCH MCS
distribution measurement (CARR.PDSCHMCSDist)
- Fix the memory leakage caused by the UEs filtering based on NSSAI for REPORT
style 4
Tested successfully with and without ASan:
- in rfsim mode: gNB-mono, CU/DU and CU-CP/CU-UP/DU
- with the USRP B210: gNB-mono
and xapp_kpm_moni, xapp_rc_moni and xapp_kpm_rc xApps.
Remove old CUDA LDPC implementation
A new implementation is under way in !3955. To simplify the MR, remove the old
LDPC CUDA implementation in a first step.
mac: fixes to prevent prb overlapping
- this patch fixes a bug in the MAC where the scheduled PRB resources can
overlap
- at the same time, we try to enforce the same semantics for "rbStart" (which
should be relative to the BWP) across the code as much as possible
UE: update pdcch config only after mib read
- In MR !3929, this change was done to call update_pdcch_config if mac
configuration is changed.
- Observed that the issue related to RAR after handover if SSB position changes
occurs also in develop 2026_w10 where MR !3929 is merged.
- update_pdcch_config should be done only after sync obtained.
- this fix is similar to the fix in initial commits of MR !3929
Remove OSD, some scripts, oaisim references
The README says:
It is just generating the XML file and it is placing it in
$(OPENAIR_TARGETS)/SIMU/EXAMPLE/OSD/WEBXML/ or http://localhost/xmlfile/
so that the oaisim could pars and run the simulation/emulation
oaisim does not exist anymore, and corresponding simulation cannot be done.
Also, it requires XAMPP and similar technologies, that I think nobody uses
in the context of OAI.
Remove also most references to oaisim.
Remove some scripts that are likely not used by anybody, or straight useless.
Integration `2026.w12`
* !3985 Fix XNAP to avoid recompilation and unnecessary includes
* !3724 Better c style pss sss
* !3972 Resolve "Demote AssertFatal `PUCCH list is full` message to a warning"
* !3956 [FHI72] [xran F] Revert and simplify the code for Liteon FR2 interoperability
* !3970 Fix for NTN phy-test mode
* !3987 T: minor: remove target record_db from automatic building
* !3993 UE: Derive Serving Network Name from SIB1 PLMN
* !3997 vrtsim doc: clarify container requirements
* !3935 [FHI72] Fix long PRACH format
* !3998 Set rxgain to 0 in vrtsim
* !3964 CI: Add FHI7.2 phytest pipeline
* !4001 Remove unused ci-scripts/mysql4testresults/ dir and content
* !3999 bugfix: use proper pointer
* !3986 handle start symbol on non-zeroth downlink symbol for SIB1 for multiplexing pattern 3 configuration.
* !3957 replace static allocation of max antennas in a dynamic structure for gnb rach
* !3859 Delay compensation in SRS
* !3909 Adjust ssPBCH_BlockPower in FHI7.2 configs
Closes#1058
See merge request oai/openairinterface5g!3989
Adjust ssPBCH_BlockPower in FHI7.2 configs
ssPBCH_BlockPower is the average EPRE of the resources elements that carry
secondary synchronization signals in dBm. In OAI, the SSB is the same level
as all the rest, so we can compute ssPBCH_BlockPower from RU TX power and
bandwidth using:
ssPBCH_BlockPower = P_TX(dBm) − 10 x log10(N_RB x 12)
where:
- P_TX is the RU transmit power
- 24 dBm for indoor RUs (configurable on the RU)
- 35 dBm for outdoor RUs (configurable on the RU)
- N_RB is the number of resource blocks for the configured bandwidth
- 12 corresponds to the number of subcarriers per RB
replace static allocation of max antennas in a dynamic structure for gnb rach
NB_ANTENNAS_RX was used in 5G by mistake
there was also a error in O-RU implementation, with no consequences
(index not in right order)
handle start symbol on non-zeroth downlink symbol for SIB1 for multiplexing
pattern 3 configuration.
This MR adds support for handling a non-zero start symbol for SIB1 when using
multiplexing pattern 3 with the per-slot CP format.
Previously, the implementation assumed that the first downlink symbol used by
a PDU always starts at symbol 0. However, this assumption does not hold for
SIB1 under multiplexing pattern 3, where the start symbol can be non-zero.
This issue does not apply to the per-symbol CP format.
Testing:
a. Microamp using the branch microamp_1048: UE registration ok. end-to-end ok.
b. Benetel: UE registration ok. end-to-end ok.
CI: Add FHI7.2 phytest pipeline
This MR consists of multiple changes related to FHI7.2 setups in CI.
- remove unused fhi72 configurations in CI
- introduce dpdk-init service in fhi72 deployments to setup sriov on the machine
- update phytest fhi72 configurations for running on bulbul
- add phytest fhi72 to RAN-SA-FHI72-CN5G pipeline
Set rxgain to 0 in vrtsim
Set rxgain to 0 in vrtsim to match rfsimulator behavior
This addresses the issue where RSRP is different between rfsim and vrtsim. With
this RSRP values between rfsim and vrtsim should be similar.
[FHI72] Fix long PRACH format
The problem was that xran_is_prach_slot() compared if the current slot is the
scheduled one. However, this becomes irrelevant if long PRACH format used.
Successfully tested end-to-end the PRACH index 7 with TDD DDDDDDDSUU and Benetel
v2.0.5.
- Introduce dpdk-init service for SR-IOV initialization within the container
- Execute script to enable low-latency RT performance (restored after tests)
When running phytest with FHI7.2 in Docker, two services are deployed:
dpdk-init and oai-gnb. Previously, AnalyzeRTStatsObject selected the
first deployed service for RT stats analysis.
Allow to explicitly select the service used for RT stats analysis instead
of relying on the first deployed service.
vrtsim doc: clarify container requirements
Describe how to set up vrtsim in containers, e.g., docker, and link to an
example. Add a minor clarification for the connection descriptor as well.
UE: Derive Serving Network Name from SIB1 PLMN
This MR modifies the nrUE to use the Serving Network Name derived from data
communicated by the Serving Network instead of data stored in the UICC.
Previously, the Serving Network Name (SNN) used during authentication was
constructed from the IMSI, implicitly assuming the UE was attached to its
home network. In roaming scenarios, this produced an incorrect SNN, causing
authentication and key derivation failures.
Changes:
- Extract the MCC and MNC from the SIB1 PLMN identity communicated by the
serving network.
- Store these values in the UE NAS context in order to propogate them from
RCC to NAS.
- The NAS key derivation functions (transferRES, derive_kausf, derive_kseaf)
now build the SNN based on the MCC/MNC broadcast in SIB1.
T: minor: remove target record_db from automatic building
We don't install clickhouse by default, so simply running make inside
common/utils/T/ would fail. Remove record_db to not build automatically.
Fix for NTN phy-test mode
- Corrected the initialisation of ntn params changed flag. Before this change on
UE, Phy-test was not running in NTN mode.
- Removed the assert wrt slot > 64 to run FR2-NTN in phy-test
- SIB2, 19 required only in SA mode like SIB1
- Introduced new method to schedule a slot in UL/DL in Phy-test mode. Dmod/ Umod
option in the command line with a value.
- This ensures that the slot n (in slots per frame) will be scheduled if
n % value == 0
- For ex: --Dmod 1 means every slot will be scheduled
- --Dmod 2 means every 2nd slot will be scheduled, like 0,2,4,6 until the
slots per frame 1.
- this can be used for testing FDD FR2 where slots go beyond 64 which is a
limitation of -D/-U option.
[FHI72] [xran F] Revert and simplify the code for Liteon FR2 interoperability
The MR !3668 introduced a lot of unnecessary changes. This MR removes useless
code in both OAI and xran F release library.
Better c style pss sss
there is a commit to simplify code for pss and sss detection
then a second commit to test a idea: detect SSS with a advantage for SSS
in phase with PSS
Bugfix: make longer telnet cmdfunc names
The maximum number of cmdfunc names is 20, which IMO is too low. Worse, if it's
longer, nothing will warn us because C will just fill the array to it's end
(without \0 at the end). To remedy this:
- Allow longer names till 64 bytes (I hit the previous limit of 20)
- Check that the name is within the length limit: if somebody wants a very long
name, the strnlen() will return the maximum length, hitting that assertion.
- When reading a command during runtime, allow the corresponding maximum length.
On that occasion, also increase total number of permitted cmdfuncs.
Use flat buffer for txdataF in gNB L1
This MR changes txdataF buffer format to hold freq domain data starting from
PRB0 instead of circular buffer that starts from PRB N/2. The motive is to
simplify RE mapping function in L1 and copying data to xran lib.
XNAP: Add encode/decode and unit tests for Xn Setup Request/Response/Failure
This MR adds complete support for the following in accordance with
3GPP TS 38.423 v16.2.0
- Add Xn Setup Request, Response, and Failure message type definitions
- Implement ASN.1 encode/decode for all Xn Setup messages
- Add equality checks and memory management helpers
- Create XNAP unit test infrastructure
Co-author: @venkatareddy
Acknowledgement
This work was carried out as part of research and development at Indian
Institute of Science (IISc), Bengaluru.
Reduce number of mutex locking in MAC->RLC direction
Currently, the scheduler locks RLC for each operation. Concretely
- for RLC status indication (to get amount of bytes per LC), it locks per LC
- for RLC indication (UL traffic), it locks for each MAC SDU of which there can
be multiple in a TB
- for RLC data req (getting data from RLC to put into a transport block), it
locks for each LCID and PDU to get.
This can have a certain overhead, because we need to re-lock RLC multiple times
instead of once (per operation above). In this MR, rework the interfaces such
that it is possible to get all information/data in a single lock-unlock cycle,
which should also help with "spikes" of scheduler times (in some scenarios, it
seems the scheduler takes longer than 0.5ms, and while it's not only locking,
re-locking might contribute), and an increase of number of UEs (e.g., instead
of doing 3 * N UEs lock cycles for getting status of SRB1, SRB2, DRB1, we do
only N times). Concretely, for each UEs RLC status indication, we lock once,
only once per LCID when filling a TB (in particular for LCID 4, on high
throughput, it might be many times), and only once per UL TB (for the common
case of UL data).
Minor fixes include the increase of the Aerial VNF thread priority, and reducing
the maximum RLC indication size to reduce excessive computation (we can't have
1MB in one TB, it is too much).
Added NTN-FR2 FDD bands defined in release 18 in Ka-band range
* NTN-FR2 bands 510, 511, 512 added. TS 38.101-5 v 18.9 defines these 3 FR2-FDD
bands for NTN operation.
* These bands are defined in Ka band range (17.3Ghz - 31Ghz).
* Tested using the added conf files using RFSIM and GEO configuration.
* There were some inconsistencies observed when testing with RFSimulator before UE
Syncs to the gNB in terms of samples being written for FR2 configurations. Once
the UE syncs, the inconsistencies disappear.
* this is the problem - UE writes incorrect number of samples and gNB complains
about getting samples in past
* The above inconsistencies were also fixed in this merge request.
* These commits solving above inconsistencies were removed from this MR and a
different MR was raised. MR with those commits: !3928.
Limit dl_DataToUL_ACK values to 15 as per standard
If min feedback time is high enough otherwise we might fail to encode/decode
pucch-Config
Assertion (enc_rval.encoded > 0 && enc_rval.encoded <= max_buffer_size * 8) failed!
In encode_cellGroupConfig() /home/francesco/openairinterface5g/openair2/LAYER2/NR_MAC_gNB/nr_radio_config.c:4029
ASN1 message encoding failed (dl-DataToUL-ACK, 18446744073709551615)!
remove xran_fh_tx_send_slot_BySymbol() and xran_fh_rx_read_slot_BySymbol()
We have separate functions ran_fh_tx_send_slot_BySymbol() and
xran_fh_rx_read_slot_BySymbol() for liteon. This MR is to remove those separate
functions.
Main author: Teodora Vladić
Co-author: Mario Joa-Ng
Changes:
xran_fh_tx_send_slot() is using if then else to handle per slot and per symbol
logic. xran_fh_rx_read_slot() is straightforward.
Testing:
- Liteon: Verified end-to-end.
- Benetel: (per slot without beam_id): Verified end-to-end.
- Microamp: (per slot with beam_id): Verified end-to-end. The branch
microamp_F_harmonize is used instead as microamp could not be run with develop
branch.
Integration `2026.w10`
* !3946 UE L1 cleanup
* !3929 UE: Fix if target cell during handover has SSB at a different offset as in source cell
* !3961 Remove Ubuntu 20 and RHEL/Rocky 8 support, increase cmake min version
* !3884 Integrate NRPPA and NGAP messages required for positioning
* !3784 CI: Create new pipeline for testing with Aerial and Jetson
* !3697 fix: issue 911 - OAI gNB hangs when AMF connection goes down
* !3914 Fix dB_fixed() function
* !3800 Add tracer to record configured events to database
* !3954 UHD streamer thread priorities in nrUE
* !3846 rename with distinct names structs and related typedefs, remove spread struct keyword
* !3958 Remove unused function arguments
Closes#911
See merge request oai/openairinterface5g!3962
