In this commit, we introduced a new global to save
the harq_pid from the PDCCH that comes down in the
DCI message so that we can use the harq_pid in the
PDSCH. Now, the UCI ind will be filled after we
have recevied the PDSCH in the tx_request.
MR !1245: [CI] Improve Iperf packet loss mismatch detection
-improve the Iperf packet loss detection and flagging when pl target (from xml) is below the test result
MR !1246: patch: remove call to end_configmodule
- full fix that set properly PARAMFLAG_NOFREE on relevant parameters
MR !1235: Nr msg4 retransmission
-Retransmission of msg4
-Some reworking in UE harq DLSCH processing
MR !1214: NR UE SA
-SIB1 detection part of initial sync at UE
-Removing a lot of hard-coding in SA procedures
-SSB start subcarrier from command line at UE
MR !1243: Nr skip mac pdu processing when nack
-Skipping processing DLSCH MAC PDU at OAI UE when NACK
MR !1229: fix(nr-ue): apply ip rules/route
-Also added 4G RF sim tests
Previously, the ue_id passed into the
init_pdcp() in the proxy would be 41.
This is outside of the bounds of the
nas_sock_fd array and would cause a crash.
This was occuring because the node_number
in the NRUE starts at 2, not 1.
In this commit we have updated the NRUE
to properly get the RadioBearer info from
the gNB. Because NSA and SA mode both use
this information, we have updated the SA
function previously in place by changing
the name to allow both NSA and SA mode to
use. This commit also updated the NR/LTE UEs
configuration files to with the correct
proxy IP address.
1. Changed hard coded preamble index(63) to soft coded.
2. Active UE will not be considered in gNB scheduging RA.
3. Added condition to process dci indication to handle multiple UEs.
4. Bug fix in mutex_lock (unlock to lock). It should be lock rather than unlock.
5. nr_ue_scheduler update not to entering into getting IP traffic to be transmitted in noS1 mode.
6. log update in checking the number of rx_ind or crc
-- Reduce required BW test in 4G RF sim
Docker:
-- Made the "Thread Parallel Config" a flexible parameter
default is SINGLE_THREAD
-- Clean Up on some Docker file about pyyaml
Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>
MR !1081 : Prb based channel estimation
-An option for using average channel estimates over 1 prb is introduced in DLSCH and ULSCH.
This improved BLER performance for MCS 28 when prbs are allocated across DC.
MR !1231 : Nr msg3 retransmission
-Implement re-transmission of MSG3 gNB and UE
-Fixes content resolution timer at UE
MR !1236 : nr: add T trace for msg4 (rrc setup)
Also, we only should be handling/generating AM
PDUs in the PDCP/RLC layer, not UM PDUs. Updated
the pre-configuration settings. This seemed to
make the uplink traffic work (meaning it gets
from NR UE to the gNB to the EPC). Woo! Still
working on the downlink.
Previously, we would assume every downlink in
slot 7 was an RAR; now we assume every slot 7
that occurs before the CFRA procedure is done
is an RAR. Also changed the logic in scheduler
to allow us to get nr_ue_sdus in the MAC layer.
Melissa Elkadi