bugfix: UE AMBR is optional
This was a problem with open5gs and more than one PDU session. The core network
sets UE AMBR only once, leading to failure in the gNB for the second PDU session.
(A proper handling of AMBR has to be develop at some point in the gNB.)
This was a problem with open5gs and more than one PDU session.
The core network sets UE AMBR only once, leading to failure in the gNB
for the second PDU session.
(A proper handling of AMBR has to be develop at some point in the gNB.)
continuously update SIB19 information for rfsim NTN LEO scenarios
Contains mainly these changes:
- gNB: add function nr_update_sib19() allowing to update SIB19
information
- rfsimulator: update SIB19 contents every frame for LEO channel
simulations
- NR UE: improve initial timing advance calculation from SIB19
Before, we only considered ta_Common_r17 and the SAT position from SIB19
to compute the initial timing advance value. This is good enough if the
satellite does not move too fast (e.g. GEO satellite).
Now we also consider ta_CommonDrift_r17, ta_CommonDriftVariant_r17 and
the SAT velocity together with the epoch time from SIB19. This improves
the accuracy of the initial TA computation, esp. for LEO satellite
scenarios.
Various fixes for UE handling, HO doc updates
- On release request, search both attach and connected list to free a UE.
- on DU disconnect, only release the correspnonding UE contexts.
- When no AMF for the UE, auto-release the UE (NGAP would also send an
answer, but better check first)
- implement a "grace period" before the DU/MAC automatically releases a
UE: this is to avoid cases in which (for whatever reason) the UE
release request is not honored by the CU. In order to not fill up UE
contexts unnecessarily, the DU will eventually (after 10s) drop the UE
context
- some clarification in HO tutorial
Mark non-existing AMF UE NGAP ID through invalid INT64_MAX number
(permitted range is up to 2^40-1). Check for this range in the RAN
function, as we might otherwise pass the invalid AMF UE NGAP ID to the
agent, which would assert with
nr-softmodem: /oai-ran/openair2/E2AP/flexric/src/lib/3gpp/enc/enc_gnb.c:83: enc_gNB_UE_asn: Assertion `gnb->amf_ue_ngap_id < 1UL << 40' failed.
In other words, don't send KPM messages for a UE which has no valid AMF
UE NGAP ID yet (which follows from the fact that the spec requires an
AMF UE NGAP ID; the previous behavior of simply sending 0 could be
considered a bug, because it's not the UE's true AMF UE NGAP ID).
NR RRC Reject UE
Improvements in procedures to handle RRCReject message both at gNB and
UE. At gNB we send RRC Reject if the UE cannot be given resources to go
into connected mode.
Direct leak of 512 byte(s) in 1 object(s) allocated from:
#0 0x7f37634e5e2b in realloc.part.0 (/lib64/libasan.so.8+0xe5e2b) (BuildId: 7f1aa7e2e600e8c9d54ce6e3d36f3d31bfe7949a)
#1 0x000000fbb9ad in encode_dyn_cb /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/per_encoder.c:23
#2 0x000000fc279e in asn_put_few_bits /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/asn_bit_data.c:220
#3 0x000000fc279e in asn_put_few_bits /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/asn_bit_data.c:192
#4 0x000000fc2ce5 in asn_put_many_bits /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/asn_bit_data.c:293
#5 0x000000fb8c33 in OCTET_STRING_encode_uper /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/OCTET_STRING_uper.c:306
#6 0x000000fd191a in SEQUENCE_encode_uper /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE_uper.c:403
#7 0x000000fd191a in SEQUENCE_encode_uper /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE_uper.c:403
#8 0x000000fcb140 in CHOICE_encode_uper /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_CHOICE_uper.c:177
#9 0x000000fd191a in SEQUENCE_encode_uper /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE_uper.c:403
#10 0x000000fcb140 in CHOICE_encode_uper /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_CHOICE_uper.c:177
#11 0x000000fcb140 in CHOICE_encode_uper /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_CHOICE_uper.c:177
#12 0x000000fd191a in SEQUENCE_encode_uper /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE_uper.c:403
#13 0x000000fbc1ed in uper_encode /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/uper_encoder.c:27
#14 0x000000fbc73a in uper_encode_to_new_buffer /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/uper_encoder.c:85
#15 0x000000e10fbd in do_RRCReconfiguration /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/MESSAGES/asn1_msg.c:586
#16 0x000000805712 in rrc_gNB_encode_RRCReconfiguration /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB.c:652
#17 0x000000893860 in nr_rrc_f1_ho_acknowledge /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB_mobility.c:280
#18 0x0000008079ac in rrc_CU_process_ue_context_setup_response /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB.c:2139
#19 0x0000008330d8 in rrc_gnb_task /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB.c:2771
#20 0x7f3763428ee5 in asan_thread_start(void*) (/lib64/libasan.so.8+0x28ee5) (BuildId: 7f1aa7e2e600e8c9d54ce6e3d36f3d31bfe7949a)
During refactoring, I had asan errors in the next line. It took me some
time to figure out that a DRB ID 0 is not valid (cf.
get_next_available_drb_id() and get_drb(), they enforce this).
Direct leak of 48 byte(s) in 1 object(s) allocated from:
#0 0x7fea71ee6f0b in malloc (/lib64/libasan.so.8+0xe6f0b) (BuildId: 7f1aa7e2e600e8c9d54ce6e3d36f3d31bfe7949a)
#1 0x0000007f29c0 in malloc_or_fail /home/richie/w/f1-refactor-ue-context/common/utils/utils.h:86
#2 0x0000007f29c0 in cuup_notify_reestablishment /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB.c:872
#3 0x000000808002 in rrc_CU_process_ue_context_setup_response /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB.c:2126
#4 0x0000008330d8 in rrc_gnb_task /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB.c:2770
#5 0x7fea71e28ee5 in asan_thread_start(void*) (/lib64/libasan.so.8+0x28ee5) (BuildId: 7f1aa7e2e600e8c9d54ce6e3d36f3d31bfe7949a)
Direct leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7f672d6e5e2b in realloc.part.0 (/lib64/libasan.so.8+0xe5e2b) (BuildId: 7f1aa7e2e600e8c9d54ce6e3d36f3d31bfe7949a)
#1 0x000000fbb4ed in encode_dyn_cb /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/per_encoder.c:23
#2 0x000000fbbeeb in _uper_encode_flush_outp /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/uper_encoder.c:126
#3 0x000000fbbeeb in uper_encode /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/uper_encoder.c:36
#4 0x000000fbc27a in uper_encode_to_new_buffer /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/uper_encoder.c:85
#5 0x00000081037c in handle_ueCapabilityInformation /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB.c:1549
#6 0x000000813ced in rrc_gNB_decode_dcch /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB.c:1902
#7 0x0000008334f2 in rrc_gnb_task /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB.c:2741
#8 0x7f672d628ee5 in asan_thread_start(void*) (/lib64/libasan.so.8+0x28ee5) (BuildId: 7f1aa7e2e600e8c9d54ce6e3d36f3d31bfe7949a)
Move the filling of DRBs to set up for UE context setup/modification
request into the corresponding functions, and use malloc() deliberately
to avoid memory leaks. In fact fill_drb_to_be_setup_from_e1_resp()
allocates memory dynamically (and has to do that), so the easiest is to
do the same for DRBs. The most straight-forward way seems to be to then
dynamically allocate all memory for F1 UE context setup/modification
request messages, and free with the corresponding free functions,
which removes a couple of memory leaks.
Similarly to the commit "Use F1 UE context setup/modif Request in
stack", we do both UE context setup/modification response at once
because of some functions that are shared by the MAC message handler.
Use the new, tested F1 UE context setup request and modification
requests in the stack.
We have to do both at once, because there are some functions that are
used by handlers for both messages, notably
- handle_ue_context_drbs_setup()
- handle_ue_context_srbs_setup()
(+ and some functions called by those two). For instance, the first uses
the (new/old) type f1ap_drb_to_be_setup_t/f1ap_drb_to_setup_t which is
shared. The alternative would be to duplicate the functionality
temporarily, and I want to avoid unnecessary code churn.
The previous condition was wrong: if a UE did not have the assoc_id of
the DU that connected (i.e., it was connected to another DU then the one
disconnecting), it was marked for deletion. Instead, skip those UEs.
Cleanup PDU Session Handling in RRC/NGAP
Currently, NGAP and RRC share the same structures and responsibilities when
handling PDU Session information: this creates tight coupling, redundancy, and
makes the code harder to maintain.
- NGAP should be responsible only for: Protocol-specific encoding/decoding
(3GPP TS 38.413)
- RRC should own: PDU Session handling and storage in the UE context
This MR is the first step in a broader refactoring of the PDU Session handling
code across NGAP and RRC layers, with the goal of splitting responsibilities
cleanly between both modules.
- Unified gtpu_tunnel_t for tunnel endpoint config (formerly f1u_tunnel_t)
- Refactored and relocated PDU Session struct definitions for better separation
between NGAP and RRC
- Moved pdusession_t for PDU Session handling out of NGAP, now defined and
managed by RRC only
- Defined 3GPP TS 38.413 message-specific structs in NGAP module
- NGAP now decodes NGAP PDU Session Resource Setup/Modify IEs and transfers
decoded data to RRC via ITTI
- Add helper functions to copy from NGAP message to pdusession_t
- Introduced new encoders/decoders/helpers in NGAP for handling PDU Session
Resource Setup/Modify procedures (e.g. decode_pdusession_transfer)
- Migrated to NGAP and removed duplicated logic for QoS information decoding
(fill_qos)
- Improved logging of GTP tunnel info
- Merged redundant functions (f1u_dl_gtp_update and f1u_ul_gtp_update)
- Removed unused code and obsolete types
- do free_func in seq_arr_erase_it on the provided range and updated unit test
- Other fixes and simplifications (e.g. simplified and clarified naming of
tunnel/session parameters and structs)
This cleanup improves code readability, has a high code churn (the deletions are
~159.7% of the insertions) and prepares for better modularity before the
refactoring of PDU Session handling in RRC/NGAP.
Enabling usage of ulsyncvalidityDuration timer in SIB19
ntn-UlSyncValidityDuration in SIB19 from Spec 38.331 v17.12 A validity
duration configured by the network for assistance information which
indicates the maximum time duration (from epochTime) during which the UE
can apply assistance information without having acquired new assistance
information. The unit of ntn-UlSyncValidityDuration is second. Value s5
corresponds to 5 s, value s10 indicate 10 s and so on.
ntn-UlSyncValidityDuration-r17 ENUMERATED{ s5, s10, s15, s20, s25, s30, s35,s40, s45, s50, s55, s60, s120, s180, s240, s900}
Implementation of epochtime is under discussion.
It can be configured in configuration file according to the above
enumeration. For GEO - 240s, MEO - 20s, LEO-5s can be used.
Motivation of the commit:
Previously, the RRC module on the NGAP interface directly handled ASN.1 decoding
of NGAP PDU Session Resource items, that was directly stored in pdusession_t, i.e.
in the UE context. Decode logic between Setup and Modify was also duplicated.,
e.g. fill_qos/fill_qos2. The idea behind this change is to achieve this flow:
(1) NGAP handler: decoding (2) ITTI to RRC: transfer decoded message (3) RRC
handler: process decoded message, e.g. store in UE context, etc..
The goal of this commit is to:
* improve the NGAP decoding library by adding decoding functions
* let RRC handle the already decoded data
* enhance error handling, with decode failures now consistently detected and rejected early
* have a cleaner, more maintainable code with fewer duplications and a clearer separation of modules
Changes:
* Moved all ASN.1 decode logic for PDU Session Resource items into the NGAP library
* Introduced decode functions for NGAP IEs whenever necessary, e.g. decode_TNLInformation
decode_pdusession_transfer
* Removed duplicate fill_qos functions and centralized QoS handling in NGAP
* Added function to copy from NGAP PDU Session Resource item to RRC pdusession_t: this actually
replaces decodePDUSessionResourceSetup in RRC, copying from the decoded NGAP struct to
the UE context pdusession_t
Motivation:
The previous code had overlapping and partially inconsiste definitions of
`pdusession_t` and related structures across NGAP and RRC. This struct type
was used for either the data stored in the UE context and the NGAP message
IEs holding the PDU session to setup/modify information.
This patch aims to separte the `pdusession_t` in RRC, where it logically belongs,
since RRC owns the state of the PDU sessions. NGAP should only
deal with protocol messages, i.e. enc/dec and transfer structures to RRC.
This clarifies module ownership. This also makes the code easier to maintain.
Changes:
* Moved `pdusession_t` definition from NGAP (`ngap_messages_types.h`) to RRC
(`nr_rrc_defs.h`)
* Added a simpler `pdusession_resource_item_t` structure to NGAP for use in
protocol messages
* Adjusted NGAP structures accordingly (Initial Context Setup, PDU Session
Setup Request, and PDU Session Modify Request).
* do decodePDUSessionResourceSetup to decode the NGAP IEs holding PDU session
information and store what necessary in the UE context PDU Session IE: NOTE
this changes were necessary since previously this function was acting on
the common NGAP/RRC pdu_session_t struct
Rename the struct members:
`pdusession_param` to `pdusession` in NGAP Initial Context Setup Request
`pdusession_setup_params` in `ngap_pdusession_setup_req_t`
`pdusession_modify_params` and `ngap_pdusession_modify_req_t`
Motivation:
Clarify the role of GTP tunnel endpoint IDs in PDU session handling. Previously,
the struct members (gNB_teid_N3, UPF_teid_N3, etc.) were confusingly named and
duplicated with separate transport-layer address fields.
This refactoring replaces these with explicit n3_incoming and n3_outgoing members using
gtpu_tunnel_t. This aligns with GTP conventions: "incoming TEID" refers to the
TEID received from the remote peer (UPF on N3), while "outgoing TEID" is the
TEID sent by the local entity (NG-RAN on N3) to the remote peer.
Benefits:
* Improves readability and clarity of the code
* Reduces redundant struct members, i.e. remove UPF_teid_N3, UPF_addr_N3
* Aligns naming with 3GPP conventions for transport layer tunnels
Changes:
* Replace gtp_addr_N3, gNB_teid_N3, gtp_teid, upf_addr with n3_incoming and n3_outgoing
* Update all related code to use the new struct members
* Aligns naming with 3GPP conventions for transport layer tunnels
This struct is used in different layers, e.g. RRC, NGAP: therefore it
has been moved to platform_types.h.
Also, the struct holds the tunnel endpoint configuration for any GTP-U
tunnel, therefore the f1u prefix is not accurate and was updated
to a more generic gtpu.
* Remove drb_is_active: function is unused and the logic will be later
added to another function to add DRBs if necessary
* Remove unused NGAP structs and empty TODO functions
* Remove unused pdusession_setup_req_t struct definition
Suspend RBs at UE
In case of suspended radio bearer (by RRC), the MAC needs to discarded received
PDUs and avoid to transmit using LCID related to that RB
SPEC 38.331 section 5.2.2.6
Inform MAC that UL SYNC got lost because of T430 expiry
- Send message NR_MAC_RRC_CONFIG_RESET with cause UL_SYNC_LOST_T430_EXPIRY to MAC
Reacquire SIB19 after T430 expiry
This is not checked in this commit
- RACH needs to be performed through probably PDCCH order to reobtain UL-SYNC
- system usecase involving Recovery from T430 expiry not tested yet as that requires changes on gNB side.
rmagueta