This commit completes the PUCCH Format 1 decoder implementation using
maximum-likelihood detection with RE averaging across symbols/RB (and
hop-wise averaging for intra-slot hopping). It also updates the PUCCH
simulation/test flow to align with the decoder changes, including
payload and logging consistency fixes needed for correct validation.
Do not limit DL power, because it is not done in the other pipelines
either. Set the UL target power high, as this increases the achievable
throughput high (PUCCH can be normal). Finally, increase BLER thresholds
to improve the MCS a bit.
[E2 agent] Refactor E2SM-KPM and implement support for REPORT style 1
- Refactor E2SM-KPM to:
- better handle different supported REPORT styles needed for "E2 Setup
Request"
- pass "Measurement Label" for calculating the measurement values
- Implement Subscription for E2SM-KPM REPORT style 1 and fill the PDSCH MCS
distribution measurement (CARR.PDSCHMCSDist)
- Fix the memory leakage caused by the UEs filtering based on NSSAI for REPORT
style 4
Tested successfully with and without ASan:
- in rfsim mode: gNB-mono, CU/DU and CU-CP/CU-UP/DU
- with the USRP B210: gNB-mono
and xapp_kpm_moni, xapp_rc_moni and xapp_kpm_rc xApps.
1. Allocate memory for the ue_id and ue_info_list arrays on the stack.
Explanation:
Every granularity period, the program passes through the fp_match_cond_type,
then through match_s_nssai_test_cond_type function pointers. Based on the node type,
the function used calloc() for these arrays.
=> the longer a connection with an E2SM-KPM xApp was, the more memory leakage occured.
2. If matched UEs > 0, only free the memory of ue_id content after each
Indication Message was sent.
Remove old CUDA LDPC implementation
A new implementation is under way in !3955. To simplify the MR, remove the old
LDPC CUDA implementation in a first step.
mac: fixes to prevent prb overlapping
- this patch fixes a bug in the MAC where the scheduled PRB resources can
overlap
- at the same time, we try to enforce the same semantics for "rbStart" (which
should be relative to the BWP) across the code as much as possible
Introduce new data structures to track the average SNR and RSSI, and
that allow to dynamically modify the target SNR (per UE) as well as
continuously get TPC updates based on the average SNR. The target SNR is
per power control loop (which a future commit will extend to use for
PUCCH).
Concretely, it maintains an average of measured SNR and RSSI. It also
updates "tpc_in_flight", which tracks TPC changes that don't show up in
the average yet. For instance, imagine that the target SNR of 15 changes
to 20. Three successive TPC commands need to be sent (+3, +1, +1), but
it will take time to show up in the average SNR. To account for this,
tpc_in_flight is updated by the TPCs sent, and an average will make it
go down back to zero at the same pace as the average SNR approaches the
target SNR. The sum of average SNR and tpc_in_flight sums up to the
actual, current SNR, which approximates the target SNR.
The SNR is kept within -1<=targetSNR<=+2dB to avoid too many TPC
changes.
The current average SNR (sum of average SNR and tpc_in_flight) is used
to continuously get TPC updates, taking into account recent TPCs sent,
the difference to target SNR, and RSSI.
If there is DTX, tpc_in_flight is modified to artificially introduce TPC
commands which increase the currently used SNR of the UE. This is
temporary, as tpc_in_flight eventually will go back to zero. If the DTX
was due to sudden SNR drop (e.g., higher path loss), this will allow to
quickly adapt the UE's SNR to new conditions.
The periodical logs are extended to not only show the current SNR, but
also the difference from the target for better analysis.
Co-authored-by: Maxime Elkael <m.elkael@northeastern.edu>
The phr_txpower_calc field actually needs to be saved in the HARQ
process for later retrieval, so set sched_pusch after phr_txpower_calc
has been calculated.
UE: update pdcch config only after mib read
- In MR !3929, this change was done to call update_pdcch_config if mac
configuration is changed.
- Observed that the issue related to RAR after handover if SSB position changes
occurs also in develop 2026_w10 where MR !3929 is merged.
- update_pdcch_config should be done only after sync obtained.
- this fix is similar to the fix in initial commits of MR !3929
* Option to build ldpc_cuda was remaining in the build script
* Build script option to build ldpc_cuda was still used in CI
* Mentions of ldpc_cuda were remaining in the documentation
Note: In the documentation, the example of ldpctest usage that was
loading ldpc_cuda was replaced by an example in which it is loading
ldpc_orig even though this is pointless as it makes ldpctest compare
ldpc_orig with ldpc_orig. On the other hand, it is the only library
other than the default ldpc that uses the former interface.
Remove OSD, some scripts, oaisim references
The README says:
It is just generating the XML file and it is placing it in
$(OPENAIR_TARGETS)/SIMU/EXAMPLE/OSD/WEBXML/ or http://localhost/xmlfile/
so that the oaisim could pars and run the simulation/emulation
oaisim does not exist anymore, and corresponding simulation cannot be done.
Also, it requires XAMPP and similar technologies, that I think nobody uses
in the context of OAI.
Remove also most references to oaisim.
Remove some scripts that are likely not used by anybody, or straight useless.
Integration `2026.w12`
* !3985 Fix XNAP to avoid recompilation and unnecessary includes
* !3724 Better c style pss sss
* !3972 Resolve "Demote AssertFatal `PUCCH list is full` message to a warning"
* !3956 [FHI72] [xran F] Revert and simplify the code for Liteon FR2 interoperability
* !3970 Fix for NTN phy-test mode
* !3987 T: minor: remove target record_db from automatic building
* !3993 UE: Derive Serving Network Name from SIB1 PLMN
* !3997 vrtsim doc: clarify container requirements
* !3935 [FHI72] Fix long PRACH format
* !3998 Set rxgain to 0 in vrtsim
* !3964 CI: Add FHI7.2 phytest pipeline
* !4001 Remove unused ci-scripts/mysql4testresults/ dir and content
* !3999 bugfix: use proper pointer
* !3986 handle start symbol on non-zeroth downlink symbol for SIB1 for multiplexing pattern 3 configuration.
* !3957 replace static allocation of max antennas in a dynamic structure for gnb rach
* !3859 Delay compensation in SRS
* !3909 Adjust ssPBCH_BlockPower in FHI7.2 configs
Closes#1058
See merge request oai/openairinterface5g!3989
Adjust ssPBCH_BlockPower in FHI7.2 configs
ssPBCH_BlockPower is the average EPRE of the resources elements that carry
secondary synchronization signals in dBm. In OAI, the SSB is the same level
as all the rest, so we can compute ssPBCH_BlockPower from RU TX power and
bandwidth using:
ssPBCH_BlockPower = P_TX(dBm) − 10 x log10(N_RB x 12)
where:
- P_TX is the RU transmit power
- 24 dBm for indoor RUs (configurable on the RU)
- 35 dBm for outdoor RUs (configurable on the RU)
- N_RB is the number of resource blocks for the configured bandwidth
- 12 corresponds to the number of subcarriers per RB
replace static allocation of max antennas in a dynamic structure for gnb rach
NB_ANTENNAS_RX was used in 5G by mistake
there was also a error in O-RU implementation, with no consequences
(index not in right order)
Raymond Knopp