Minimalist gnb tracer to trace (for the moment) rxdataF when some
decoding for PUCCH or PUSCH has been done.
Important: T_BUFFER_MAX and T_CACHE_SIZE have been changed. T_BUFFER_MAX
is twice as big as before. T_CACHE_SIZE has been devided by two. Globally,
the memory usage of the T tracer is the same, but since we divided by two
the number of buffers in the cache, we may hit some realtime problems if
all the buffers are busy at some point. The simple solution would be to
use 8192*2 for T_CACHE_SIZE as it was, but then we double the memory usage
of the T tracer. This, or another solution, to be defined.
MR1029 : Benetel driver update
This MR fixes an issue with the driver for the 4G Benetel RRUs.
Power levels on the 5G side were adapted to avoid saturation of the signals.
5G performance is now the same as with USRP.
Support for 2 antennas for both 4G and 5G was added
MR1062 : fixing the RE offset for each Rx antenna in pusch channel estimation
This code allocates memory from the heap:
```
static void *UE_phy_stub_standalone_pnf_task(void *arg)
{
...
UL_INFO->crc_ind.crc_indication_body.crc_pdu_list =
calloc(NB_UE_INST, sizeof(nfapi_crc_indication_pdu_t));
```
I see NB_UE_INST==1.
Then this code:
```
void fill_crc_indication_UE_MAC(int Mod_id,
int frame,
int subframe,
UL_IND_t *UL_INFO,
uint8_t crc_flag,
int index,
uint16_t rnti,
nfapi_ul_config_request_t
*ul_config_req) {
...
nfapi_crc_indication_pdu_t *pdu =
&UL_INFO->crc_ind.crc_indication_body
.crc_pdu_list[UL_INFO->crc_ind.crc_indication_body.number_of_crcs];
```
used .number_of_crcs to index into .crc_pdu_list without first
checking if .number_of_crcs is in range.
When run with multiple UEs, sometimes .number_of_crcs==1 and then
-fsanitize=address complains.
Change is to use NUMBER_OF_UE_MAX instead of NB_UE_INST.
With this change, -fsanitize=address stopping complaining.
-fsanitize=address detected that we were trying to access bytes
past the end of a block of malloc'ed memory.
Specifically, in this code:
```
} else if (ENB_NAS_USE_TUN) {
if( LOG_DEBUGFLAG(DEBUG_PDCP) )
log_dump(PDCP, pdcpData, sizeToWrite, LOG_DUMP_CHAR,"PDCP
output to be sent to TUN interface: \n");
ret = write(nas_sock_fd[0], pdcpData, sizeToWrite);
```
-fsanitize=address said:
```
==80==ERROR: AddressSanitizer: heap-buffer-overflow on address
0x61100004ffdc at pc 0x7f57c5f576a5 bp 0x7f57bb53c240 sp
0x7f57bb53b9e8
READ of size 108 at 0x61100004ffdc thread T7
0x61100004ffdc is located 0 bytes to the right of 220-byte region
[0x61100004ff00,0x61100004ffdc)
```
So, the code was trying to access the first byte after a block of
heap memory.
sizeToWrite was calculated like this:
```
int sizeToWrite= sizeof (pdcp_data_ind_header_t) +
pdcpHead->data_size;
```
There were a few other similar invocations of write() in the same
function used the wrong size. That sizeToWrite calculation
should be used only when the header is being sent, too, which
happens in only one place in this function.
With this commit, our tests pass and -fsanitize=address is happy.
The global mbms_rab_id was defined as `uint16_t` in
eNB_scheduler_mch.c but `int` in other places. So, code that
wrotes this global would clobber the two bytes that follow the
variable in memory.
Found by `-fsanitize=address`.
In phy_free_lte_eNB in lte_init.c, the lte-uesoftmodem would
crash during shutdown because it was dereferencing null pointers.
This commit adds checks to avoid that.
For some reason the htons invocation got deleted which broke
the VNF P7 interface.
Also fixed some build issues, not sure how these got onto the
develop branch to begin with.
Florian Kaltenberger