When running, nr_psbchsim, we get this UBsan error:
openair1/PHY/NR_UE_ESTIMATION/nr_adjust_synch_ue.c:79:16: runtime error: member access within misaligned address 0x0ff4278c791c for type 'struct nrUE_params_t', which requires 8 byte alignment
The problem is that the corresponding definition of
get_nrUE_params() in psbchsim.c does not actually return the UE params,
but void, so we might or might not get something that resembles valid
data in nr_adjust_synch_ue.c. Fix this by including nr-uesoftmodem.h
(that provides the correct declaration) and define it correctly. Due to
type mismatches, also adapt downlink_frequency, uplink_frequency_offset,
and openair_cfg (which might result in the same type of bugs).
This adds DTX detection in PUCCH 2 receiver. This is detected by MAC
already which will drop PUCCH 2 indications that are detected as DTX.
For the moment this uses the same pucch0_dtx_threshold value indicated
in L1 section of the configuration file. The feature firstly reduces
unnecessary logging on stdout and the use of invalid CSI measurements in
the MAC scheduler.
Closes: #547
- Fixes#853, #854, #858, #859, #862
- handle repeated NGAP Initial context setup requests, thereby fixing assert:
Assertion (!ue_p->as_security_active) failed!
In rrc_gNB_generate_SecurityModeCommand() /home/eurecom/raymond/openairinterface5g/openair2/RRC/NR/rrc_gNB.c:2590
logic error: security already activ
- A lot of cleanup: remove almost all use of protocol_ctxt_t in 5G RRC and use
existing pointers instead
Introduce two tests for NR RLC AM entity:
- test_nr_rlc_am_entity
- benchmark_nr_rlc_am_entity
The benchmark can be used to verify processing time improvements for NR RLC AM
entity. The benchmark creates two entities and creates an unbalanced
communication channel between them with 10% loss packet loss and 100:1 PDU sent
ratio. This allows the lists in RLC to build up and triggers RLC AM code
related to looking through the segment/pdu lists.
Example benchmark output:
ubuntu@zeus:~/bpodrygajlo/openairinterface5g/cmake_targets/build$ ./openair2/LAYER2/nr_rlc/tests/benchmark_nr_rlc_am_entity
[LOG] init aborted, configuration couldn't be performed
log init done
CMDLINE: "./openair2/LAYER2/nr_rlc/tests/benchmark_nr_rlc_am_entity"
[CONFIG] debug flags: 0x00400000
2024-10-16T14:58:20+02:00
Running ./openair2/LAYER2/nr_rlc/tests/benchmark_nr_rlc_am_entity
Run on (8 X 4700 MHz CPU s)
CPU Caches:
L1 Data 48 KiB (x4)
L1 Instruction 32 KiB (x4)
L2 Unified 1280 KiB (x4)
L3 Unified 12288 KiB (x1)
Load Average: 0.48, 0.27, 0.20
***WARNING*** CPU scaling is enabled, the benchmark real time measurements may be noisy and will incur extra overhead.
--------------------------------------------------------------------
Benchmark Time CPU Iterations
--------------------------------------------------------------------
BM_nr_rlc_am_entity/100 50096 ns 50097 ns 13101
BM_nr_rlc_am_entity/256 140386 ns 140387 ns 4868
BM_nr_rlc_am_entity/1024 536323 ns 536311 ns 1309
BM_nr_rlc_am_entity/4096 2084464 ns 2084385 ns 338
BM_nr_rlc_am_entity/16384 8309318 ns 8309458 ns 81
BM_nr_rlc_am_entity/20000 9843792 ns 9843774 ns 68
This hotfix removes division by num_antenna_ports in PDSCH precoding matrix generation.
These matrices are defined for CSI reporting in this way but here we are using them for
transmission and this results in an unwanted 10*log10(num_antenna_ports) reduction in
transmit power (3dB for 2 antenna ports, 6dB for 4 antenna ports, etc.)
- Update links for the latest Ubuntu 24.04 LTS iso file
- Update docker install to the latest instructions on the official website
- Update UHD to v4.7.0.0 and update dependencies for Ubuntu 24.04
Test configuration: Tested SIB19 reception on SCS120 Khz + 50Mhz bw
config file used:
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band257.u3.32prb.usrpx410.conf
+ NTN config commands used
sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band257.u3.32prb.usrpx410.conf --sa --rfsim -d
sudo ./nr-uesoftmodem --band 261 -C 27533280000 -r 32 --numerology 3 --ssb 72 --sa --rfsim -d --ue-scan-carrier
The Issue is that SIB19 is not being received because of CRC error, only
SIB1 was being received.
This changes the way T_IDs are defined. The T_ID macro was using a
integer to pointer cast in order to provide type safety. This trick
disables some compiler optimizations, as explained here:
https://clang.llvm.org/extra/clang-tidy/checks/performance/no-int-to-ptr.html.
Removing the type cast reenables the compiler optimizations.
This MR aims to address warnings raised when compiling for ARM ( tested
with cross compilation, not directly on ARM hardware ). The addressed
warnings are as follows:
- An unused variable in file oai_dfts_neon.c
- Wrong printf format specifier related to oai_cputime_t
- Wrong parameter type in qam64_qam64 call
This MR closes issue #844
Also, correctly set the pkg-config search path for libraries for the
target system. Also closes: #746
A UE might send a ULInformationTransfer without the actual content present
(intentionally or not). Check this and handle appropriately to avoid
a segfault when reading the empty NAS message.
Closes: #862
Pass UE context pointer directly. In the switch, do not return to not
create memory leaks (after the switch, memory is freed). Move the
function up to make it appear before the use of the function.
Pass UE context, without protocol_ctxt_t, for cleanup. Remove the return
from within the switch, as this would lead to memory leaks; nothing is
executed after the switch statement (except for freeing memory).
The existing check for the initialization of GTP is wrong; GTP returns
-1 if it could not initialize. Correct this, such that the DU will stop
if GTP cannot be initialize.
If we continue, the DU is requested to set up a GTP tunnel; because GTP
is not initialized, it assumes it is in monolithic/no F1, and does not
set up a tunnel. The F1 UE Context setup response encoder then fails
with this assertion:
Assertion (tnl->teid > 0) failed!
In DU_send_UE_CONTEXT_SETUP_RESPONSE() ../../../openair2/F1AP/f1ap_du_ue_context_management.c:415
Exiting execution
../../../openair2/F1AP/f1ap_du_ue_context_management.c:415 DU_send_UE_CONTEXT_SETUP_RESPONSE() Exiting OAI softmodem: _Assert_Exit_
Aborted
Closes: #853
A UE might send a MeasurementReport without the actual IEs present
(intentionally or not). Check this and handle appropriately to avoid
assertion
Assertion (measurementReport->criticalExtensions.present == NR_MeasurementReport__criticalExtensions_PR_measurementReport && measurementReport->criticalExtensions.choice.measurementReport != ((void*)0)) failed!
In rrc_gNB_process_MeasurementReport() ../../../openair2/RRC/NR/rrc_gNB.c
Closes: #859
A UE might send a UE Capability Information without unsolicitatedly
(intentionally or not). Check this and handle appropriately to avoid
assertion
Assertion (UE->xids[xid] == RRC_UECAPABILITY_ENQUIRY) failed!
In handle_ueCapabilityInformation() ../../../openair2/RRC/NR/rrc_gNB.c
Closes: #858
A UE might send a rrcReestablishmentComplete without the actual IEs
present (intentionally or not). Check this and handle appropriately to
avoid assertion
Assertion (reestablishment_complete->criticalExtensions.present == NR_RRCReestablishmentComplete__criticalExtensions_PR_rrcReestablishmentComplete) failed!
In handle_rrcReestablishmentComplete() ../../../openair2/RRC/NR/rrc_gNB.c:1364
Closes: #854
Prior to this commit, if we receive an Initial Context Setup Request for
a UE that has AS security set up, the gNB asserts with
Assertion (!ue_p->as_security_active) failed!
In rrc_gNB_generate_SecurityModeCommand() openairinterface5g/openair2/RRC/NR/rrc_gNB.c:2590
logic error: security already activ
However, TS 38.413 says:
> The AMF may initiate the Initial Context Setup procedure if a
> UE-associated logical NG-connection exists for the UE
(I interpret this as "it might happen anytime")
> store the received Security Key in the UE context and, if the NG-RAN
> node is required to activate security for the UE, take this security key
> into use.
(I interpret this as "do not set up AS security again")
In this commit, handle if we receive an Initial Context Setup Request
for an existing UE context. As said in the spec, we store the keys. If
security is not active, we trigger RRC Security Mode Command. If it is
active, we skip Security, and directly set up a PDU session. If there is
also no PDU session, we simply forward the NAS message, and acknowledge.
If there was no AS security, after security, the gNB would trigger the
setup of PDU sessions (if any), and then forward any NAS PDUs, which is
stated in the if block if AS security is already active.
This changes the way T_IDs are defined. The T_ID macro was using a integer to pointer cast in
order to provide type safety. This trick disables some compiler optimizations, as explained
here: https://clang.llvm.org/extra/clang-tidy/checks/performance/no-int-to-ptr.html.
Removing the type cast reenables the compiler optimizations.
Prior to this commit, the include path for some libraries found through
pkg-config when cross compiling is not correct:
$ grep include CMakeCache.txt
blas_INCLUDEDIR:INTERNAL=/usr/include/x86_64-linux-gnu
...
This is because we did not tell pkg-config to search in the right path.
Since for cross-compilation, we install packages in parallel in the
system, override the primary directory where the .pc files located, in
the cross-compilation toolchain file for cmake.
Closes: #746
Jaroslava Fiedlerova