Remove this option: some tests produce an excessive amount of output on
failure (e.g., googletest/benchmark). This seems to overwhelm the Python
CI code. Suppress this output, because we can always manually run this
test. A high-level "this test is ok/nok" should be fine for the CI.
NR UE: enable CSI report for SISO case
Correct precoded_sinr_dB wrongly set to 0 for SISO case, also correct
ri_restriction is 0 when calculating CQI bit length for SISO.
Update/refine gNB MAC stats, update L1
Only applicable with -q option.
Print a number of statistics, e.g., rx_ulsch_sdu to track UL MAC stats
timing. Remove unused time_meas_t definitions, and fix the name for the
total gNB scheduler time.
Print the RU stats in nrL1_stats.log, as some are already there, and do
not "pollute" the periodic logs when -q is enabled.
I used this to see why there are sometimes late slots with Aerial. I
used the above stats to get a general overview. This additional patch
shows that at least in RFsim, the RLC indication in rx ulsch sdu can
take up to 20us on my machine. Given that we can have multiple PDUs in
UL (10?), this can amount to a sizeable amount of time. While this is
for another MR, I thought the cleanup would be nice to have.
Do not pollute periodic output, and rather print those into
nrL1_stats.log. A number of them are already there anyway, so transfer
the rest. Note: ru->ifdevice.tx_fhaul is omitted, as we don't have any
IF5 split in 5G.
Refactor F1 UE context messages, add unit tests
Add encoder+decoder+util functions for F1 UE context messages, and use
them in the stack. The overall goal is to unit test encoder+decoder (to
be sure that what we send is what we receive), and remove any memory
leaks related to F1 handling. Messages that have a unit test:
- F1 UE context setup request/response
- F1 UE context modification request/response
- F1 UE context release request/command/complete
This MR removes almost all remaining memory leaks that are observable in
a "standard" configuration, running SISO in RFsim. In RFsim (without
channel modelling), there are only two memory leaks shown in asan, one
in L1, and one in NGAP.
Speed up docker deployment in CI
- Using docker compose up --wait instead of a custom healthcheck script:
from: https://docs.docker.com/reference/cli/docker/compose/up/
--wait Wait for services to be running|healthy. Implies detached mode.
--wait-timeout Maximum duration in seconds to wait for the project to be running|healthy
- Speeding up the healthchecks by reducing the interval from 1-10s to
0.5s during start period
start_period creates a special period after the start of the container
where the healthcheck is executed every start_interval . During this
time the failures do not count towards the retries counter, but
successes change the status to healthy. This allows container to reach
healthy status much sooner.
- Using init: true to speed up docker compose down/stop
`init: true` initializes the docker container with tini or
alternative: tini is used to collect all the processes and correctly
pass the termination signal to them. This allows the docker container
to be stopped without waiting 10 seconds to kill the container
- Smallest example of this is:
services:
test-init:
image: ubuntu:jammy
command: sleep 10d
We use the same resource for CSI meas report and RSRP (judging by the
name of the functions), but the memory allocations need to be separate
to avoid a double free:
==2063066==ERROR: AddressSanitizer: heap-use-after-free on address 0x7c27d43e3ce8 at pc 0x000000fcd279 bp 0x7be7cc9e7120 sp 0x7be7cc9e7118
READ of size 8 at 0x7c27d43e3ce8 thread T6
#0 0x000000fcd278 in SEQUENCE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE.c:97
#1 0x000000fcd278 in SEQUENCE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE.c:69
#2 0x000000fd6249 in SET_OF_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SET_OF.c:236
#3 0x000000fd6249 in SET_OF_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SET_OF.c:220
#4 0x000000fcd103 in SEQUENCE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE.c:91
#5 0x000000fcd103 in SEQUENCE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE.c:69
#6 0x000000fc90c9 in CHOICE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_CHOICE.c:185
#7 0x000000fc90c9 in CHOICE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_CHOICE.c:158
#8 0x000000fcd103 in SEQUENCE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE.c:91
#9 0x000000fcd103 in SEQUENCE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE.c:69
#10 0x000000fd6249 in SET_OF_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SET_OF.c:236
#11 0x000000fd6249 in SET_OF_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SET_OF.c:220
#12 0x000000fcd01a in SEQUENCE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE.c:88
#13 0x000000fcd01a in SEQUENCE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE.c:69
#14 0x000000fc90c9 in CHOICE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_CHOICE.c:185
#15 0x000000fc90c9 in CHOICE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_CHOICE.c:158
#16 0x000000fcd01a in SEQUENCE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE.c:88
#17 0x000000fcd01a in SEQUENCE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE.c:69
#18 0x000000fcd01a in SEQUENCE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE.c:88
#19 0x000000fcd01a in SEQUENCE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE.c:69
#20 0x000000fcd01a in SEQUENCE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE.c:88
#21 0x000000fcd01a in SEQUENCE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE.c:69
#22 0x0000009d78ae in ue_context_setup_request /home/richie/w/f1-refactor-ue-context/openair2/LAYER2/NR_MAC_gNB/mac_rrc_dl_handler.c:692
#23 0x00000083fee2 in rrc_add_nsa_user /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB_nsa.c:330
#24 0x000000886e8b in rrc_gNB_process_f1_setup_req /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB_du.c:444
#25 0x000000833942 in rrc_gnb_task /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB.c:2766
#26 0x7fe7d5e28ee5 in asan_thread_start(void*) (/lib64/libasan.so.8+0x28ee5) (BuildId: 7f1aa7e2e600e8c9d54ce6e3d36f3d31bfe7949a)
#27 0x7fe7d527f1d3 in start_thread (/lib64/libc.so.6+0x711d3) (BuildId: 2b3c02fe7e4d3811767175b6f323692a10a4e116)
#28 0x7fe7d5301ceb in __GI___clone3 (/lib64/libc.so.6+0xf3ceb) (BuildId: 2b3c02fe7e4d3811767175b6f323692a10a4e116)
0x7c27d43e3ce8 is located 24 bytes inside of 40-byte region [0x7c27d43e3cd0,0x7c27d43e3cf8)
freed by thread T6 here:
#0 0x7fe7d5ee5bcb in free.part.0 (/lib64/libasan.so.8+0xe5bcb) (BuildId: 7f1aa7e2e600e8c9d54ce6e3d36f3d31bfe7949a)
#1 0x000000fd6249 in SET_OF_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SET_OF.c:236
#2 0x000000fd6249 in SET_OF_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SET_OF.c:220
#3 0x000000fcd103 in SEQUENCE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE.c:91
#4 0x000000fcd103 in SEQUENCE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE.c:69
#5 0x000000fc90c9 in CHOICE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_CHOICE.c:185
#6 0x000000fc90c9 in CHOICE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_CHOICE.c:158
#7 0x000000fcd103 in SEQUENCE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE.c:91
#8 0x000000fcd103 in SEQUENCE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE.c:69
#9 0x000000fd6249 in SET_OF_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SET_OF.c:236
#10 0x000000fd6249 in SET_OF_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SET_OF.c:220
#11 0x000000fcd01a in SEQUENCE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE.c:88
#12 0x000000fcd01a in SEQUENCE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE.c:69
#13 0x000000fc90c9 in CHOICE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_CHOICE.c:185
#14 0x000000fc90c9 in CHOICE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_CHOICE.c:158
#15 0x000000fcd01a in SEQUENCE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE.c:88
#16 0x000000fcd01a in SEQUENCE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE.c:69
#17 0x000000fcd01a in SEQUENCE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE.c:88
#18 0x000000fcd01a in SEQUENCE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE.c:69
#19 0x000000fcd01a in SEQUENCE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE.c:88
#20 0x000000fcd01a in SEQUENCE_free /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE.c:69
#21 0x0000009d78ae in ue_context_setup_request /home/richie/w/f1-refactor-ue-context/openair2/LAYER2/NR_MAC_gNB/mac_rrc_dl_handler.c:692
#22 0x00000083fee2 in rrc_add_nsa_user /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB_nsa.c:330
#23 0x000000886e8b in rrc_gNB_process_f1_setup_req /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB_du.c:444
#24 0x000000833942 in rrc_gnb_task /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB.c:2766
#25 0x7fe7d5e28ee5 in asan_thread_start(void*) (/lib64/libasan.so.8+0x28ee5) (BuildId: 7f1aa7e2e600e8c9d54ce6e3d36f3d31bfe7949a)
previously allocated by thread T6 here:
#0 0x7fe7d5ee6883 in calloc (/lib64/libasan.so.8+0xe6883) (BuildId: 7f1aa7e2e600e8c9d54ce6e3d36f3d31bfe7949a)
#1 0x000000a1ac53 in get_default_secondaryCellGroup /home/richie/w/f1-refactor-ue-context/openair2/LAYER2/NR_MAC_gNB/nr_radio_config.c:3969
#2 0x0000009d8913 in create_new_UE /home/richie/w/f1-refactor-ue-context/openair2/LAYER2/NR_MAC_gNB/mac_rrc_dl_handler.c:571
#3 0x0000009d8913 in ue_context_setup_request /home/richie/w/f1-refactor-ue-context/openair2/LAYER2/NR_MAC_gNB/mac_rrc_dl_handler.c:638
#4 0x00000083fee2 in rrc_add_nsa_user /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB_nsa.c:330
#5 0x000000886e8b in rrc_gNB_process_f1_setup_req /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB_du.c:444
#6 0x000000833942 in rrc_gnb_task /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB.c:2766
#7 0x7fe7d5e28ee5 in asan_thread_start(void*) (/lib64/libasan.so.8+0x28ee5) (BuildId: 7f1aa7e2e600e8c9d54ce6e3d36f3d31bfe7949a)
Thread T6 created by T0 here:
#0 0x7fe7d5ede492 in pthread_create (/lib64/libasan.so.8+0xde492) (BuildId: 7f1aa7e2e600e8c9d54ce6e3d36f3d31bfe7949a)
#1 0x0000012a4ba3 in threadCreate /home/richie/w/f1-refactor-ue-context/common/utils/system.c:283
#2 0x0000006b5fef in itti_create_task /home/richie/w/f1-refactor-ue-context/common/utils/ocp_itti/intertask_interface.cpp:317
#3 0x000000435c5f in create_gNB_tasks /home/richie/w/f1-refactor-ue-context/executables/nr-softmodem.c:310
#4 0x000000435c5f in main /home/richie/w/f1-refactor-ue-context/executables/nr-softmodem.c:620
#5 0x7fe7d52115f4 in __libc_start_call_main (/lib64/libc.so.6+0x35f4) (BuildId: 2b3c02fe7e4d3811767175b6f323692a10a4e116)
#6 0x7fe7d52116a7 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x36a7) (BuildId: 2b3c02fe7e4d3811767175b6f323692a10a4e116)
#7 0x0000004672d4 in _start (/home/richie/w/f1-refactor-ue-context/build/nr-softmodem+0x4672d4) (BuildId: 81450e9a0b832ca9e36b1984ecc232efde59d424)
Closes: #958
Direct leak of 512 byte(s) in 1 object(s) allocated from:
#0 0x7f37634e5e2b in realloc.part.0 (/lib64/libasan.so.8+0xe5e2b) (BuildId: 7f1aa7e2e600e8c9d54ce6e3d36f3d31bfe7949a)
#1 0x000000fbb9ad in encode_dyn_cb /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/per_encoder.c:23
#2 0x000000fc279e in asn_put_few_bits /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/asn_bit_data.c:220
#3 0x000000fc279e in asn_put_few_bits /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/asn_bit_data.c:192
#4 0x000000fc2ce5 in asn_put_many_bits /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/asn_bit_data.c:293
#5 0x000000fb8c33 in OCTET_STRING_encode_uper /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/OCTET_STRING_uper.c:306
#6 0x000000fd191a in SEQUENCE_encode_uper /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE_uper.c:403
#7 0x000000fd191a in SEQUENCE_encode_uper /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE_uper.c:403
#8 0x000000fcb140 in CHOICE_encode_uper /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_CHOICE_uper.c:177
#9 0x000000fd191a in SEQUENCE_encode_uper /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE_uper.c:403
#10 0x000000fcb140 in CHOICE_encode_uper /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_CHOICE_uper.c:177
#11 0x000000fcb140 in CHOICE_encode_uper /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_CHOICE_uper.c:177
#12 0x000000fd191a in SEQUENCE_encode_uper /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE_uper.c:403
#13 0x000000fbc1ed in uper_encode /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/uper_encoder.c:27
#14 0x000000fbc73a in uper_encode_to_new_buffer /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/uper_encoder.c:85
#15 0x000000e10fbd in do_RRCReconfiguration /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/MESSAGES/asn1_msg.c:586
#16 0x000000805712 in rrc_gNB_encode_RRCReconfiguration /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB.c:652
#17 0x000000893860 in nr_rrc_f1_ho_acknowledge /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB_mobility.c:280
#18 0x0000008079ac in rrc_CU_process_ue_context_setup_response /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB.c:2139
#19 0x0000008330d8 in rrc_gnb_task /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB.c:2771
#20 0x7f3763428ee5 in asan_thread_start(void*) (/lib64/libasan.so.8+0x28ee5) (BuildId: 7f1aa7e2e600e8c9d54ce6e3d36f3d31bfe7949a)
During refactoring, I had asan errors in the next line. It took me some
time to figure out that a DRB ID 0 is not valid (cf.
get_next_available_drb_id() and get_drb(), they enforce this).
Direct leak of 48 byte(s) in 1 object(s) allocated from:
#0 0x7fea71ee6f0b in malloc (/lib64/libasan.so.8+0xe6f0b) (BuildId: 7f1aa7e2e600e8c9d54ce6e3d36f3d31bfe7949a)
#1 0x0000007f29c0 in malloc_or_fail /home/richie/w/f1-refactor-ue-context/common/utils/utils.h:86
#2 0x0000007f29c0 in cuup_notify_reestablishment /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB.c:872
#3 0x000000808002 in rrc_CU_process_ue_context_setup_response /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB.c:2126
#4 0x0000008330d8 in rrc_gnb_task /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB.c:2770
#5 0x7fea71e28ee5 in asan_thread_start(void*) (/lib64/libasan.so.8+0x28ee5) (BuildId: 7f1aa7e2e600e8c9d54ce6e3d36f3d31bfe7949a)
Direct leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7f672d6e5e2b in realloc.part.0 (/lib64/libasan.so.8+0xe5e2b) (BuildId: 7f1aa7e2e600e8c9d54ce6e3d36f3d31bfe7949a)
#1 0x000000fbb4ed in encode_dyn_cb /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/per_encoder.c:23
#2 0x000000fbbeeb in _uper_encode_flush_outp /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/uper_encoder.c:126
#3 0x000000fbbeeb in uper_encode /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/uper_encoder.c:36
#4 0x000000fbc27a in uper_encode_to_new_buffer /home/richie/w/f1-refactor-ue-context/build/openair2/RRC/LTE/MESSAGES/uper_encoder.c:85
#5 0x00000081037c in handle_ueCapabilityInformation /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB.c:1549
#6 0x000000813ced in rrc_gNB_decode_dcch /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB.c:1902
#7 0x0000008334f2 in rrc_gnb_task /home/richie/w/f1-refactor-ue-context/openair2/RRC/NR/rrc_gNB.c:2741
#8 0x7f672d628ee5 in asan_thread_start(void*) (/lib64/libasan.so.8+0x28ee5) (BuildId: 7f1aa7e2e600e8c9d54ce6e3d36f3d31bfe7949a)
Move the filling of DRBs to set up for UE context setup/modification
request into the corresponding functions, and use malloc() deliberately
to avoid memory leaks. In fact fill_drb_to_be_setup_from_e1_resp()
allocates memory dynamically (and has to do that), so the easiest is to
do the same for DRBs. The most straight-forward way seems to be to then
dynamically allocate all memory for F1 UE context setup/modification
request messages, and free with the corresponding free functions,
which removes a couple of memory leaks.
Similarly to the commit "Use F1 UE context setup/modif Request in
stack", we do both UE context setup/modification response at once
because of some functions that are shared by the MAC message handler.
Use the new, tested F1 UE context setup request and modification
requests in the stack.
We have to do both at once, because there are some functions that are
used by handlers for both messages, notably
- handle_ue_context_drbs_setup()
- handle_ue_context_srbs_setup()
(+ and some functions called by those two). For instance, the first uses
the (new/old) type f1ap_drb_to_be_setup_t/f1ap_drb_to_setup_t which is
shared. The alternative would be to duplicate the functionality
temporarily, and I want to avoid unnecessary code churn.
Reintroduce separate message types to simplify the encoding/decoding,
including shorter names. The old types will be removed once everything
has been migrated to the new encoder/decoder, which should ensure that
everything is properly migrated to the unit-tested encoder/decoders.
Also, for each type of F1 message (F1 UE context setup request,
response, modification request, ...) introduce a separate type to avoid
to mistakenly use wrong fields, which can lead to bugs. In this regard,
the DL PDCP SN bit size in the DRB-ToBeSetup list of the UE context
setup request is optional, as it will also be used in the UE context
modification request DRB SetupMod list (which avoids quite some code
duplication). The encoder checks that this IE is present, though.
F1AP_LIB_FIND_IE() is used to look up elements in a list, but was
hitherto hardcoded to use "protocolIEs" as an intermediate struct. A
follow-up commit will use this macro where we don't have protocolIEs,
but "iE_Extensions". Hence, modify to make it work for that case (and
others) as well.
Introduce generic _F1_CHECK_EXP(), which is like the macros for checking
values (_F1_EQ_CHECK_INT() etc). Reuse the same for introducing
_F1_EQ_CHECK_OPTIONAL_IE that will be used to write the check for
optional fields more concisely.
CP_OPT_BYTE_ARRAY() FREE_OPT_BYTE_ARRAY() are macros to wrap handling of
optional byte arrays.
_F1_MALLOC() simplifies allocations and is similar to asn1cCallocOne(),
but provided to avoid confusion (since more than ASN.1 structures will
use it).
All will be used in the following commits.
Print a number of statistics, e.g., rx_ulsch_sdu to track UL MAC stats
timing. Remove unused time_meas_t definitions, and fix the name for the
total gNB scheduler time.
CI: Add "may_fail" step to execute flaky steps
Add a generic may_fail CI XML step option that indicates the CI step may
fail, but the CI would still be marked as succeeded (instead of skipping
all steps and mark as failed). The cause of this failure depends on the
specific step, e.g., Iperf failing because of low throughput. This
allows to clean up some code and e.g. remove the command_fail option of
Custom_Command, which is then superfluous (and less generic). An
inconvenience is that those may_fail steps will be marked as "failed" in
the HTML. Later cleanup can correct this.
The may_fail is used for executing FHI7.2 testing to push 700 Mbps in DL
(close to the maximum).
Fix some bugs and add some clean up, see commit messages.
Enabling usage of ulsyncvalidityDuration timer in SIB19
ntn-UlSyncValidityDuration in SIB19 from Spec 38.331 v17.12 A validity
duration configured by the network for assistance information which
indicates the maximum time duration (from epochTime) during which the UE
can apply assistance information without having acquired new assistance
information. The unit of ntn-UlSyncValidityDuration is second. Value s5
corresponds to 5 s, value s10 indicate 10 s and so on.
ntn-UlSyncValidityDuration-r17 ENUMERATED{ s5, s10, s15, s20, s25, s30, s35,s40, s45, s50, s55, s60, s120, s180, s240, s900}
Implementation of epochtime is under discussion.
It can be configured in configuration file according to the above
enumeration. For GEO - 240s, MEO - 20s, LEO-5s can be used.
"multi-ue profile" was a specific iperf option to do iperf across
multiple UEs. However, this is not necessary anymore, the Iperf
handling multiple UEs "implicitly" (based on the number of UEs).
As of the parent commit, there is a generic "may_fail" option through
which we could still ignore an error. Thus, command_fail is superfluous,
and avoids some extra code.
Further, in all these cases, we should better be informed about any
error, so let's not use may_fail for these tests.
There might be various occasions where a CI step should be attempted to
be executed, despite a chance of failing. For instance, we might want
to try executing an instable Iperf test, and still mark the CI as
passing if it fails.
This commit introduces a generic "may_fail" option that will mark any CI
test as succeeded, despite having failed.
Ideally, we would print a warning in the HTML code, but this is not
possible because each step emits its own HTML code, instead of the main
loop handling this. We can improve this in the future.
Step 004000 appears double in the XML description. Remove one to avoid
that it is executed twice (because the Python code goes through the list
of test descriptions and executes all that match the current ID =>
double if appears twice).
Integration: `2025.w24`
Closes#965
See merge request oai/openairinterface5g!3476
* !3354 Preparation Work for N2 Handover
* !3383 Add configurable values of NR RLC and NR PDCP to the configuration file
* !3468 Resolve "SSB frequency at gnb.sa.band78.fr1.24PRB.usrpb210.conf is invalid"
* !3466 YAML related updates
* !3460 SRS configuration
* !3474 Fix AMF selection fallback by PLMN ID when no UE identity is present or matching
* !3473 Fix various bugs and inconsistencies in config read, SCTP, ITTI, GTP
* !3169 NR RU improvements for analog beamforming
* !3456 CI: update config for AW2S pipeline
* !3369 Add Security Mode Reject lib/unit test and adopt in stack
* !3457 Fix NR reestablishment
* !3412 [E2 agent] E2AP README update and OAI-FlexRIC CI pipeline improvements
[E2 agent] E2AP README update and OAI-FlexRIC CI pipeline improvements
- E2AP README - add OSC nearRT-RIC section; update with proper FlexRIC
links, and explanations on prerequisites, as well as for xApps
- OAI-FlexRIC CI - use separate containers for xApps
- add reference files for CU-UP/CU-CP
- add logging for KPM NSSAI condition
Fix NR reestablishment by implementing the "DRB-suspend" at the MAC.
This means that the during reestablishment, gNB MAC discards received
DRB packets, and does not schedule DRB. Fix a couple of additional
issues in reestablishment. # Please enter a commit message to explain
why this merge is necessary,
For additional information, see
https://gitlab.eurecom.fr/oai/openairinterface5g/-/merge_requests/2668#note_119369
The spCellConfig is to be dropped during reestablishment and to be
applied after reconfiguration. Implement this using the
RRCReconfigurationComplete acknowledgment from the CU to the DU,
applying the spCellConfig if present (which signals a prior
reestablishment). Remove a prior flag that is not needed anymore, and
do not "guess" when is the reconfiguration, because it is now handled in
the case of the ack.
The spCellConfig is not relevant as long as we use a common search space
for DCIs (and the activation of dedicated search space happens after
applying spCellConfig). For PUCCH, there is the PDSCH transmission of
RRCReconfiguration which gets ack'ed in the default PUCCH.
RRCReconfigurationComplete is sent in PUSCH (again through common
search space). In theory, there cannot be another PUCCH before the
application of spCellConfig, as all bearers are still suspended, and
there should not be another SRB1 transmission in the meantime, as only
one RRC transaction can be active at a time.
Co-authored-by: francescomani <email@francescomani.it>
Add a flag for each RB that tracks suspension state. Mark all RBs
(except SRB1) as suspended on reestablishment, and de-suspend on
reconfiguration. Only check RLC status for non-suspended RBs. For UL
data traffic, check that DRB/SRB2 exist (SRB1 should be there as soon as
the UE context exists).
Add Security Mode Reject lib/unit test and adopt in stack
This MR is adding the library for the NAS Security Mode Reject, and
relevant unit test.
The UE shall send a SECURITY MODE REJECT containing a 5GMM cause that
typically indicates one of the following cause values: (23) UE security
capabilities mismatch. (24) security mode rejected, unspecified
- The message shall be protected if a security context is available.
- The message is adopted in the handling of Security Mode Command failure.
See 3GPP TS 24.501 5.4.2.5 "NAS security mode command not accepted by
the UE".
This MR includes changes from !3262:
> This patch series addresses a security issue where the UE improperly
> accepts a Security Mode Command (SMC) without an authentication header
> (Security Header 0). This behavior violates TS 24.501 and enables an
> attacker to bypass authentication, set integrity protection to NULL
> (NIA0), and reconfigure the UE without proper verification.
>
> We identified the following issues:
>
> 1. The UE currently accepts unauthenticated SMC messages, even
> allowing NIA0 and EIA0 to be set outside emergency mode.
> 2. When applying NIA0, the MAC field remains uninitialized,
> consistently containing the sequence 0xFF3F0000, making it feasible
> to bypass authentication and enforce insecure configurations.
> 3. The UE does not properly signal security mode failures to the Core
> Network.
>
> This patch series tries to address the above-mentioned issues:
>
> 1. Reject unauthenticated SMC messages, enforcing the requirement that
> they must be integrity-protected.
> 2. Validate MAC before applying security settings, ensuring that only
> authenticated messages are accepted.
> 3. Tear down the security context if an integrity check fails.
> 4. Introduce the Security Mode Reject message to inform the Core
> Network of failed SMC procedures, as required by TS 24.501.
Fix various bugs and inconsistencies in config read, SCTP, ITTI, GTP
Fix bugs across various layers, mostly layer 3, including memory leaks.
See the commits for more details.
Fix AMF selection fallback by PLMN ID when no UE identity is present or matching
If a mask is present (i.e., not zero), AMF selection by PLMN ID may
still fail, causing the AMF selection process to skip the fallback
option, i.e. selection by PLMN ID, when no UE identity is available or
when no match is found.
This MR adds also warnings in case there's a match for the AMF is not
found.
SRS configuration
- Fix segmentation fault, a memory leak, and LOGs for SRS usage
NFAPI_NR_SRS_BEAMMANAGEMENT
- Refactor SRS configuration;
- Add SRS ResourceSet to get the SNR measurements at MAC layer
In this MR we have 2 SRS ResourceSet, for the same SRS Resource. This
way, in addition to obtaining the UL-RI, we also obtain the SNR in the
MAC and fill the PRB Black list.
This branch has been tested with COTS UE and with RFSim. The measured
values seem correct.
Using the USIM interface in the MAC is non-sensical (violates layer
separation). Add header include in nr-softmodem.c, which previously came
through nr_mac_gNB.h -> usim_interface.h.
Avoid leaking memory upon failed socket binding by calling
freeaddrinfo() before exiting in error cases.
Fixes leak:
Direct leak of 64 byte(s) in 1 object(s) allocated from:
#0 0x0000004ac038 in malloc (/home/richie/oai/cmake_targets/ran_build/build/nr-softmodem+0x4ac038) (BuildId: 875d6e5bc54d7c89bdcf151452f12703cb6fd110)
#1 0x7f0fdd92e2a6 in getaddrinfo (/lib64/libc.so.6+0x1202a6) (BuildId: 2b3c02fe7e4d3811767175b6f323692a10a4e116)
#2 0x00000043d7ad in getaddrinfo (/home/richie/oai/cmake_targets/ran_build/build/nr-softmodem+0x43d7ad) (BuildId: 875d6e5bc54d7c89bdcf151452f12703cb6fd110)
#3 0x000000700c73 in udpServerSocket(openAddr_s) /home/richie/oai/openair3/ocp-gtpu/gtp_itf.cpp:486:17
#4 0x000000700c73 in gtpv1Init /home/richie/oai/openair3/ocp-gtpu/gtp_itf.cpp:546:10
#5 0x000000c692b8 in cuup_init_n3 /home/richie/oai/openair2/E1AP/e1ap.c:744:61
#6 0x000000549ea1 in create_gNB_tasks /home/richie/oai/executables/nr-softmodem.c:320:7
#7 0x000000549ea1 in main /home/richie/oai/executables/nr-softmodem.c:619:15
#8 0x7f0fdd8115f4 in __libc_start_call_main (/lib64/libc.so.6+0x35f4) (BuildId: 2b3c02fe7e4d3811767175b6f323692a10a4e116)
#9 0x7f0fdd8116a7 in __libc_start_main@GLIBC_2.2.5 (/lib64/libc.so.6+0x36a7) (BuildId: 2b3c02fe7e4d3811767175b6f323692a10a4e116)
#10 0x000000408524 in _start (/home/richie/oai/cmake_targets/ran_build/build/nr-softmodem+0x408524) (BuildId: 875d6e5bc54d7c89bdcf151452f12703cb6fd110)
This printf just shows which config sections are being read, but this
has no useful information for a user. It was introduced in 7731f5bd2d
but was not present prior to this commit, either.
YAML related updates
- Add common function config_common_getdefault
- Handle exceptions from the yaml-cpp library, transform them into
understandable errors written to stderr
- Add some unit tests.
Add configurable values of NR RLC and NR PDCP to the configuration file
This is for the gNB (the UE gets the values from the gNB).
The physical simulators were also adapted (we put the previously
hardcoded values that were everywhere in the code into the simulators
themselves). I don't think we need to have those values configurable for
the simulators, but I can study the possibility to add this if someone
tells me it's important (if not important I prefer not to do it, I am
not sure if it is trivial to do or not).
Preparation Work for N2 Handover
This MR introduces preliminary improvements to support !3334.
Refactored utility NGAP functions
- Moved allocAddrCopy to NGAP utilities
Decoding Functions for NGAP IEs:
- Added common decoding functions (decode_ngap_guami,
decode_ngap_UEAggregateMaximumBitRate, decode_ngap_nssai, etc.)
- Adopted these functions across the NGAP stack
Improvements to RRC and Handover Handling:
- Enhanced get_neighbour_cell_information and get_neighbour_config to
differentiate input parameters (cell by NR Cell ID vs. gNB by PCI)
- Used byte_array_t in nr_initiate_handover
- Introduced RRCReconfigurationParams_t to structure RRCReconfiguration
IEs
- Added a function to build NR_RRCReconfiguration_IEs_t
- Adopted this approach in do_RRCReconfiguration and refactored the
function
- Refactored the handling of Dedicated NAS message list
- Add masterKeyUpdate handling in RRCReconfiguration generation
PDCP Re-Establishment Improvements:
- Enabled PDCP re-establishment for SRB1/SRB2 based on a bitmap in
createSRBlist (3GPP TS 38.331 RadioBearerConfig)
NH & KgNB Key Management:
- Added NH derivation function as per 3GPP TS 33.501 A.10
- Moved KgNB derivation function to key_nas_deriver utilities
The primary motivation here is to remove a VLA, as in the parent
commits. Closer inspection revealed that (1) it is only used by the LTE
UE, and (2) it only logs some data which we likely don't need. So I
simply removed this function.
Upon failure, the error message was saying that something failed (i.e.,
the reason), but not parameters of the getaddrinfo(). Simplify root
cause analysis by providing the parameters for the attempted
getaddrinfo() call.
Integration: `2025.w23`
Closes#962, #956, and #801
See merge request oai/openairinterface5g!3464
* !3302 Enhance UE identity management in Initial UE Message and other NGAP improvements
* !3400 T bugfix: check input data a bit better
* !3459 Improvements in NR band tables according to Rel.17
* !3465 Fix checking that amf_ip_address section is not set.
* !3463 Move RRC radio parameters file to DU
* CI: Use host network mode in NSA-B200 pipeline
* !3389 Relax NR_UE_CAPABILITY_SLOT_RX_TO_TX asserts
* !3417 Imscope updates
* !3443 Fix data race in NR UE MSG3 scheduling
* !3467 remove dead globals
A number of radio-related RRC parameters, e.g., CellGroupConfig,
"originate" at the DU and are sent to the CU for forwarding to the UE
only. Similarly, there are additional parameters, e.g., RLC-BearerConfig
(part of CellGroupConfig), that originate at the DU.
Hence, the DU decides about these parameters, depending on the MAC state
and capabilities. To clarify this, move the existing
openair2/RRC/NR/nr_rrc_config.{c,h} => openair2/LAYER2/NR_MAC_gNB/nr_radio_config.{c,h}
So that developers know that while those are RRC parameters, they
originate at the DU.
In other words, the CU/RRC is not supposed to use any of these functions
in the RRC. Correspondingly, includes of this file have been cleaned up
(and when they are not necessary at the MAC as well).
One of the next commits moves nr_rrc_config.c "down to" the MAC/DU. The
BearerConfig functions are only used at the DU, so move them here in the
corresponding file.
Integration: `2025.w22`
Closes#832
See merge request oai/openairinterface5g!3452
* !3415 several fixes and cleanup for nrLDPC_coding_t2
* !3448 T: macpdu2wireshark: dump to file instead of sending UDP packets
* !3449 bugfix: pass correct buffer
* !3453 CI: revert modification of SSB per RACH occasion in SC-FDMA test
* !3440 Update NAS documentation
* !3451 fix the number of preambles per SSB at UE in case PRACH is configured with groupB
* !3441 Replace hashtable with epoll_event_t in rfsimulator
* !3277 Add CI test to force RRC IDLE and new connection setup with 5G-S-TMSI
* !3454 Keep old MAC stats after re-establishment
* !3450 Make number of UL/DL actors in NR UE fully configurable
* !3458 (doc): update README with build icons for dedicated arch and os
Make number of UL/DL actors in NR UE fully configurable
Due to different processing requirements on different CPUs it might be
beneficial to enable the users to set the number of UL/DL actors.
Allow disabling UL/DL actor frameworks and processing inline or setting
the number of DL/UL threads with --num-ul-actors/num-dl-actors
This was tested to work with 0 UL/DL actors with rfsim.
Integration: `2025.w20`
Closes#826 and #884
See merge request oai/openairinterface5g!3438
* !3168 Improvements for LDPC encoding
* !3386 E1 Bearer Context Release enc/dec lib and unit test
* !3394 Fix Liteon with MTU 1500 and update the FHI docs
* !3437 CI: RFsim F1/HO: Use hanging-workaround to avoid blocking of second client
* !3384 Add enc/dec library and unit test for E1 Bearer Context Modification Failure
* !3418 Use common function to generate CSI-RS signal
* !3379 Add physim tests into ctest framework
* !3420 Added intercommunication between namespaces
* !3422 Tutorials: updates for NR SA Tutorials
* !3436 Beam switching small fixes
* !3439 Fix RRC resources periodicity determination according to number of slots per period
* !3434 Remove EPC/UE main.py parameters
* !3423 Fix PDSCH and PUSCH BWP Start and Size when PXSCH is scheduled with a DCI format x_0 in any type of PDCCH common search space
* !3442 Fix UL chanel estimates mapping in 2-layer MMSE receiver
Fix UL chanel estimates mapping in 2-layer MMSE receiver
This MR addresses a degradation in UL throughput observed in 4x4 MIMO
tests, starting from 2025.w17.
The issue was traced to incoherent indexing in the ul_ch_estimates_ext
when handling 4-antenna UL configurations.
Fix PDSCH and PUSCH BWP Start and Size when PXSCH is scheduled with a DCI format x_0 in any type of PDCCH common search space
- Fix PDSCH and PUSCH BWP Start and Size when PDSCH/PUSCH is scheduled
with a DCI format x_0 in any type of PDCCH common search space
- Fix resource block assignment information (RIV field) for DCI format
x_0 when scheduling in any type of PDCCH common search space
Fix RRC resources periodicity determination according to number of slots per period
Otherwise we may end up in scenarios where some channels would end in
the wrong TDD slot type
Tutorials: updates for NR SA Tutorials
- Update links for the latest Ubuntu 24.04.2 LTS iso file
- Update docker install to the latest instructions on the official
website
- Update UHD to v4.8.0.0
- Add support for 'default'/"empty" DNN to CN5G configuration file
* Add support for 'default' DNN to CN5G configuration file (that
will also be used when DNN is not available, "empty" DNN). This
configuration will allow most of the COTS UE to get PDUSession
without any APN configuration made by the user
* The 'default'/"empty" DNN configuration support was added in
oai/cn5g/oai-cn5g-amf!343
Add physim tests into ctest framework
Convert physim testcases listed in
cmake_targets/autotests/test_case_list.xml into ctest. Note: Tests for
dlsim_tm4 are excluded, due to compilation issues.
CTest evaluates success based on return code: '0' = pass, non-zero =
fail. For some simulators, the return code is non-zero even when the
test is successful (as indicated by success messages in the test logs).
For some simulators, the return code is always '0'. This inconsistency
has been address in the first two commits of this MR.
To build and execute these tests:
- using cmake
cd openairinterface5g
mkdir build && cd build # you can also do that in cmake_targets/ran_build/build
cmake .. -GNinja -DENABLE_PHYSIM_TESTS=ON && ninja tests
ctest
- using build_oai: physim-related ctests are activated when PHY
simulators are built (use build_oai with '-P' or '--phy_simulators'
option)
cd openairinterface5g/cmake_targets
./build_oai --ninja --phy_simulators
cd ran_build/build
ctest
Link to newly created 4g and 5g RAN-Physim-Cluster pipelines:
- RAN-Physim-Cluster-4G: https://jenkins-oai.eurecom.fr/job/RAN-Physim-Cluster-4G/
- RAN-Physim-Cluster-5G: https://jenkins-oai.eurecom.fr/job/RAN-Physim-Cluster-5G/
Robert Schmidt