Brings the O-RAN compliant antenna muting feature (originally introduced
on the 'new' branch) onto the latest upstream 2026.w17 tag.
Files added:
openair1/PHY/NR_TRANSPORT/nr_antenna_state.{c,h}
openair1/PHY/NR_TRANSPORT/nr_antenna_control.{c,h}
Files modified (integration hooks):
CMakeLists.txt, executables/nr-gnb.c
openair1/PHY/INIT/nr_init.c, openair1/PHY/defs_gNB.h
openair1/PHY/MODULATION/{beamforming.c,nr_modulation.h,nr_beamforming.c}
openair1/SCHED_NR/nr_ru_procedures.c
openair2/LAYER2/NR_MAC_gNB/mac_proto.h
openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_{primitives,dlsch,uci}.c
Conflicts resolved:
- defs_gNB.h: kept upstream's new headers + appended antenna_state.h
- nr_init.c: dropped reference to upstream-removed nr_srs_info init,
kept nr_init_antenna_state() call
- beamforming.c: upstream moved nr_beam_precoding into new file
nr_beamforming.c; nr_beam_precoding_with_muting added there with
upstream's signature (no slot param)
- nr_modulation.h: aligned _with_muting decl to upstream signature
- nr_ru_procedures.c: muting check applied around upstream's new
fft_shift in nr_feptx, and around per-port memcpy in nr_feptx_prec
- gNB_scheduler_uci.c: SINR-based MCS hint uses get_dl_nrOfLayers(NULL,
sched_ctrl, ...) since nrmac is not in scope at the call site
- mac_proto.h: get_dl_nrOfLayers signature updated to take gNB_MAC_INST*
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Make sure the radio libs are stopped before `end()` call. This allows
for a cleaner exit under most circumstances. Some libraries like zmq_radio
don't exit cleanly without it.
L1 RX: use queues instead of arrays and linear search for PUCCH, PUSCH, SRS, PRACH
This MR is an attempt to reduce the time L1 RX searches in array for the
next job to process, and instead use a queue. This queue is a FIFO,
because the various jobs (FAPI messages) to process come in order, and
need to be processed in order. The MR (hopefully, to be measured)
reduces the amount of time spent searching for the next UE (because the
next job is always at the beginning of the queue), and should scale
better for many UEs.
It does the following:
- introduce two helper libraries for (1) Frame.Slot calculation (sfn_t),
already introduced in !3521 (merged) commit 3102068e, and (2) a ring
buffer with fixed size
- use sfn_t and ring buffer (gNB->pucch_queue) to remove the linear
array for PUCCH (gNB->pucch)
- use sfn_t and ring buffer (gNB->pusch_queue) for some PUSCH lookups.
Because we need to still store PUSCH contexts, gNB->pusch is still
there
- use sfn_t and ring buffer (gNB->srs_queue) to remove the linear array
for SRS (gNB->srs)
- use sfn_t and ring buffers (gNB->prach_ru_queue and
gNB->prach_l1rx_queue) to remove the linear array for PRACH
(gNB->prach_list)
- some minor cleanups, e.g., additional loops over the PUSCH array,
using const, using pointers instead of indices, etc
Use two queues for PRACH processing:
- prach_ru_queue: pass jobs from TX thread (scheduler) to RU thread. For
split 8, the RU thread itself handles PRACH processing; for split 7.2,
it is the library that is responsible for handling PRACH messages (see
oran_fh_if4p5_south_in())
- prach_l1rx_queue: after jobs have been handled in RU thread, use this
queue to pass jobs to the RX thread. There, preamble detection is
performed, and RACH.indication FAPI messages are filled if a preamble
has been detected.
Together, these queues replace a linear search in a global array that
has been modified by three threads at the same time. The design ensures
that access now is thread-safe, and with less overhead.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Thread-pool support for TX symbol processing.
This MR adds thread-pool support for TX symbol processing. It allows modulation
/mapping/layer-precoding to run in parallel and offers a speedup of around 3
compared to single-thread execution. This is particularly important for large
bandwidths and 4 or more TX antenna ports where the precoding operation is quite
computationally-intensive.
Please see the description of !3489 for the performance comparison results and
the nr_dlsim timing measurements.
* Add option `--L1s.L1_num_tx_sym_per_thread` for the softmodems and `-Y` for `nr_dlsim`
to provide the number of symbols processed per thread.
It defaults to 0 which makes that every symbols are processed in one thread.
* The last symbol processing task is processed in the L1 TX thread.
Further unused arguments cleanup
More fixes for unused function arguments (see #1057),
add_compile_options(-Wunused-parameter) added in folders:
- nfapi
- openair2
- openair3
- USRP
- rfsimulator
* Global timers were started and stopped
in the TX symbol processing tasks
which is not thread safe
* gNBs nrL1_stats.log now shows
PDSCH generation time rather than
layer mapping and precoding times
Cleanup common_lib.h
This change reduces the number of dependecies of common_lib.h and simplifies
the task of implementing an external OAI radio library.
- all RAN code, CI code, configuration files, dockerfiles, in CSSL v1.0
- all deployment code (openshift, charts, ancillary files like shell
scripts), in MIT
- documentation in CC-BY-4.0
- exceptions might apply and are listed in NOTICE
- there is a new LICENSES folder with all licenses
- CONTRIBUTIONS.md has been updated accordingly
For automated changes based on OAI PL v1.1:
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.{c,h,cpp}
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.ts
perl -i~ -0pe 's/<!--.*Licensed to the OpenAirInterface.*openairinterface.org\n.*-->/<!-- SPDX-License-Identifier: LicenseRef-CSSL-1.0 -->/s' **/*.xml
The rest (cmake, files with missing license, cmake) manually.
Remove the \file directive, as it is always superfluous because the
current file is implicit [1]:
> If the file name is omitted (i.e. the line after \file is left blank)
> then the documentation block that contains the \file command will belong
> to the file it is located in.
Author names and e-mails are not relevant for us: it can always be
inferred from git blame, and is often outdated.
Eurecom code has been contributed and was under OAI PL v1.0/v1.1.
For the cpack package contact: put generic email address that is
independent of an individual and that will remain reachable.
[1] https://www.doxygen.nl/manual/commands.html#cmdfile
replace static allocation of max antennas in a dynamic structure for gnb rach
NB_ANTENNAS_RX was used in 5G by mistake
there was also a error in O-RU implementation, with no consequences
(index not in right order)
Fix for NTN phy-test mode
- Corrected the initialisation of ntn params changed flag. Before this change on
UE, Phy-test was not running in NTN mode.
- Removed the assert wrt slot > 64 to run FR2-NTN in phy-test
- SIB2, 19 required only in SA mode like SIB1
- Introduced new method to schedule a slot in UL/DL in Phy-test mode. Dmod/ Umod
option in the command line with a value.
- This ensures that the slot n (in slots per frame) will be scheduled if
n % value == 0
- For ex: --Dmod 1 means every slot will be scheduled
- --Dmod 2 means every 2nd slot will be scheduled, like 0,2,4,6 until the
slots per frame 1.
- this can be used for testing FDD FR2 where slots go beyond 64 which is a
limitation of -D/-U option.
--Dmod option/--Umod option,
for example --Dmod 1 will schedule every slot in slots per frame
--Dmod 3 will schedule every 3rd slot. You can use --Dmod option togethor with -D option
same for uplink scheduling too.
for FR2 with 120Khz scs, there are 80 slots. Removed the assert such that FR2 config
can be tested in phy-test, currently bitmap works only until 64 slots.
Added NTN-FR2 FDD bands defined in release 18 in Ka-band range
* NTN-FR2 bands 510, 511, 512 added. TS 38.101-5 v 18.9 defines these 3 FR2-FDD
bands for NTN operation.
* These bands are defined in Ka band range (17.3Ghz - 31Ghz).
* Tested using the added conf files using RFSIM and GEO configuration.
* There were some inconsistencies observed when testing with RFSimulator before UE
Syncs to the gNB in terms of samples being written for FR2 configurations. Once
the UE syncs, the inconsistencies disappear.
* this is the problem - UE writes incorrect number of samples and gNB complains
about getting samples in past
* The above inconsistencies were also fixed in this merge request.
* These commits solving above inconsistencies were removed from this MR and a
different MR was raised. MR with those commits: !3928.
params_changed flag is set to true when reconfig.raw file gets processed,
as NTN config is present in reconfiguration.
but due to this initialisation happening at a later point
params_changed is reset which results in incorrect writes on RFsimulator
Remove unused function arguments
Some of them, because there are hundreds if not thousands. Warnings at compilation time can be enabled using -Wunused-parameter.
UE: Fix if target cell during handover has SSB at a different offset as in source cell
These changes fixed these observed issues:
- If target cell has a different SSB position compared to source cell during
ho - sync was not successful.
- RAR does not get decoded if SSB position has changed on the target cell
compared to source cell.
Actual problem is that SYNC does not happen on the target cell as frame parameters is not updated
and ssb start carrier is not correct in the UE frame parameters
function nr_get_ssb_start_sc to determine ssb_start_subcarrier
CI: rework log analysis to simplify and allow new use cases
The CI has some log analysis, but it is unmaintainable (huge functions
that mix eNB/gNB or lteUE/nrUE, are not tested, most of it is not used
or useful...) or limited to specific use cases (the timing-phytest time
analysis is hardcoded to source builds instead of also handling analysis
when running from docker images). This MR reimplements both functions.
For the log analysis, the CI team decided to throw away the old
analysis, and reimplement a mechanism that checks the couple of things
we care for.
- Allow to analyze phy-test timing analysis from docker files, and add a
unit test
- Rework existing log analysis to remove useless checks, and make it
more composable
* The undeployment steps (Undeploy_Object(), Terminate_eNB()) take an
<analysis> XML object which then either has a <services> subelement
with check that are whitespace delimited (similar to how other xml
task steps have <services>). For checks that contain whitespace,
they can use <service> (singular) that encodes a single check, such
that e.g., arguments could include spaces.
* Each check is of form service=check[=arguments], where service is
the docker services, check is a checking function (implemented as a
class with run(file, options) function inside cls_loganalysis.py,
and options arguments after the second = that is to be read by run()
(basically, options will contain arguments that can be freeform)
* these definitions can occur multiple times, e.g., it could be
serviceA=Check1 and serviceA=Check2=Args and it will execute both
Check1 and Check2
* if a service is declared, it will execute alse the Default check
which currently checks for an assertion
* Implemented (and inspired from the existing CI analysis) are:
- Default check to check for assertions (will be extended, to e.g.,
address/undefined behavior sanitizer analysis)
- RetxCheck: retransmission check as used in the CI
- LastLineContains to check the last line containes a specific
string
- ContainsString to check a specific string appears in logs
- EndsWithBye: check that towards the end (but not necessarily the
last line), there is a Bye. string (a workaround since we don't
always terminate with 0)
- There is a plan to use return codes after stopping in docker, but most
executables do not end with 0 most of the time, such that we needed to
abandon this plan.
- Additional fixes (see commit messages) and delete unused code
Synchronize multiple gNBs by aligning the slot boundaries
Currently, we derive frame and slot number based on proc->timestamp_rx
using
proc->frame_rx = (proc->timestamp_rx / (fp->samples_per_subframe*10))&1023;
proc->tti_rx = get_slot_from_timestamp(proc->timestamp_rx, fp);
This ignores the samples
proc->timestamp_rx % fp->samples_per_frame
while computing the frame and slot number creating a mis-alignment with
the slot boundaries. A detailed description of the slot misalignment
in a pictorial representation can be seen in an attachment in the MR [1].
We fix this alignment issue by compensating these samples during the
first reception.
We can test the synchronization of the multiple gNBs from the estimated
ToAs from the PRS in the Downlink and the estimated ToAs from the SRS in
the Uplink using rfsim.
In order to test this, make sure you build gNB and nrUE along with the
telnetsrv flag using the option --build-lib telnetsrv.
Also, enable the following log in the function
nr_est_srs_timing_advance_offset() in
openair1/PHY/NR_ESTIMATION/nr_measurements_gNB.c to observe SRS ToAs
LOG_I(NR_PHY, "SRS estimatd ToA %d [RX ant %d]: TA offset %d, TA offset ns %d (max_val %ld, mean_val %ld, max_idx %d)\n", srs_toa, ant, *ta_offset, *ta_offset_nsec, max_val, mean_val, max_idx);
Furthermore, update the option Active_gNBs = 2; in
targets/PROJECTS/GENERIC-NR-5GC/CONF/ue.nr.prs.fr1.106prb.conf to enable
decoding PRS transmitted from two gNBs
To run:
nrUE:
sudo ./nr-uesoftmodem -r 106 --numerology 1 --band 78 -C 3619200000 --uicc0.imsi 001010000000001 --rfsim --phy-test -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/ue.nr.prs.fr1.106prb.conf --rfsimulator.serveraddr server
gNB 0:
sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb0.prs.band78.fr1.106PRB.usrpx310.conf --gNBs.[0].min_rxtxtime 6 --rfsim --phy-test --rfsimulator.[0].serveraddr 127.0.0.1 --rfsimulator.[0].options chanmod --rfsimulator.[0].modelname AWGN --telnetsrv
gNB 1:
sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb1.prs.band78.fr1.106PRB.usrpx310.conf --gNBs.[0].min_rxtxtime 6 --rfsim --phy-test --rfsimulator.[0].serveraddr 127.0.0.1 --rfsimulator.[0].options chanmod --rfsimulator.[0].modelname AWGN --telnetsrv
When we run the nrUE, gNB0 and gNB1, we can see the following logs
nrUE:
[PHY] [gNB 0][rsc 0][Rx 0][sfn 976][slot 2] DL PRS ToA ==> 0.0 / 2048 samples, peak channel power -16.4 dBm, SNR +4.0 dB, rsrp -42.2 dBm
[PHY] [gNB 1][rsc 0][Rx 0][sfn 976][slot 3] DL PRS ToA ==> 0.0 / 2048 samples, peak channel power -16.4 dBm, SNR +4.0 dB, rsrp -42.2 dBm
gNB 0:
[NR_PHY] SRS estimatd ToA 0 [RX ant 0]: TA offset 31, TA offset ns 0 (max_val 99820162, mean_val 80176, max_idx 0)
gNB 1:
[NR_PHY] SRS estimatd ToA 0 [RX ant 0]: TA offset 31, TA offset ns 0 (max_val 98784562, mean_val 79369, max_idx 0)
From the above logs, when we run the rfsim and when no delays introduced, we can observe the following results
In the Downlink at the UE, the estimated ToAs using PRS from both gNB0
and gNB1 are 0 and in the uplink, the ToA estimated from the SRS
transmitted by the UE at both the gNBs are also 0. This indicates that
both the gNBs are synchronized along with their slot boundaries. We also
highlight that this is not the case in the current develop branch since
the slot boundaries are not aligned.
We also can test the multi gNB synchronization by introducing delays
using telnet as follows,
Introduce new_offset (delay) of 4 samples to the gNB 0 from UE in the
uplink as follows,
openairinterface5g$ echo rfsimu setdistance rfsimu_channel_enB0 20 | ncat --idle 1 127.0.0.80 9080
softmodem_gnb> rfsimu_setdistance_cmd: new_offset 4, new (exact) distance 19.518 m, new delay 0.000065 ms
Ncat: Idle timeout expired (1000 ms).
We can oberve this delay of 4 samples being reflected in the estimated
SRS ToAs at gNB 0 while not changing the ToA in gNB 1
[NR_PHY] SRS estimatd ToA 4 [RX ant 0]: TA offset 31, TA offset ns 65 (max_val 98803636, mean_val 79430, max_idx 8)
similarly, Introduce new_offset (delay) of 2 samples to the gNB 1 from
UE in the uplink as follows,
openairinterface5g$ echo rfsimu setdistance rfsimu_channel_enB0 10 | ncat --idle 1 127.0.0.81 9081
softmodem_gnb> rfsimu_setdistance_cmd: new_offset 2, new (exact) distance 9.759 m, new delay 0.000033 ms
Ncat: Idle timeout expired (1000 ms).
We can oberve this delay of 2 samples being reflected in the estimated
SRS ToAs at gNB 1 while not changing the ToA in gNB 0
[NR_PHY] SRS estimatd ToA 2 [RX ant 0]: TA offset 31, TA offset ns 32 (max_val 98962768, mean_val 79552, max_idx 4)
Closes#897
[1] https://gitlab.eurecom.fr/oai/openairinterface5g/-/merge_requests/3892
Remove L1 dependence from NR band number
L1 band information relied on get_band function that couldn't provide an
unambiguous result. Also there is no SCF compliant parameter for L1 and
generally we don't really need that information in L1.
The MR also remove a RU section that used nr_band but was never really
accessed in NR.
NR UE: correctly compute writeTimestamp for SCS > 30 kHz with rf-simulator
Contains also two minor cleanups for nr-ue.c:
- make fp point to constant NR_DL_FRAME_PARMS where possible
- use c16_t type for I/Q sample arrays
Similarly to gNB, eNB, lteUE, end with a "Bye." that the CI (will) check
for.
The right way to do this would be to use the exit code, but most
executables do not actually end with 0, such that we need to check for
this. Thus, this commit is only to harmonize with other executables.
makiandClaude Opus 4.7