We need the ntn_config when reconfiguring the PHY layer for a new initial sync,
e.g. for calculating the DL Doppler frequency.
As a dedicated scheduled_response dl_config PDU it reaches the PHY layer too late,
as part of the phy_config.config_req it reaches the PHY layer in time with the
other configuration values.
- Replaced ITTI message queues with notifiedFIFO for RRC to MAC communication in UE.
- Enables correct message delivery to multiple MAC instances running in parallel threads.
- Introduced `nr_mac_rrc_message_t` union for MAC-RRC messages.
- Updated all relevant message handling and initialization code to use notifiedFIFO.
- Use MAX_NUM_NR_UE_INST in NR UE MAC to control number of MAC instances.
- Modify the MAC interface slightly so that nr_l2_init_ue only initializes one instance
Pass a "type" of RLC operational mode, from which split-type/gNB/UE
decision is derived.
Co-authored-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Test for init_RA
A testcase for init_RA function.
The testcase redefines the following functions as stubs:
- nr_mac_rrc_ra_ind
- nr_write_ce_ulsch_pdu
- mac_rlc_data_req
- lockGet_ul_config
- release_ul_config
- remove_ul_config_last_item
- nr_ue_configure_pucch
These stubs can be used to check init_RA behavior
Extract nr_ra_procedures.c into a separate library and add a testcase for init_RA function.
The testcase redefines the following functions as stubs:
- nr_mac_rrc_ra_ind
- nr_write_ce_ulsch_pdu
- mac_rlc_data_req
- *lockGet_ul_config
- release_ul_config
- remove_ul_config_last_item
- nr_ue_configure_pucch
These stubs can be used to check init_RA behavior
Set SA mode as default
- Set standalone (SA) mode as the default.
- Adjust commands in Docker Compose files by removing --sa flags and
adding --nsa flags where applicable.
- Add a function to verify that only one mode is being used at a time.
- Update all relevant documentation.
While we don't have SIB19 support yet, UE gets this parameter from command line, just like --ntn-koffset and --ntn-ta-common.
We use this value to initialize the UE's time-tracking PI controller accumulator.
This allows to correctly track the time even if the delay is changing significantly (e.g. due to LEO satellite movement).
We also use it to compensate for the time drift that happenes while performing the initial sync.
- num DL/UL harq processes, bits for harq id in DCIs, set according to IEs configured in RRC messages
- removed going through all the harq processes before triggering nr_ue_ulsch_procedures in phy_procedures_nr_ue.c
- did not remove usage of MAX_HARQ_PROCESSES in init phase
Thomas Schlichter