For 7.2 FH, some RUs do phase compensation, whereas for others, the DU
does it. In fact, this can be "negotiated" using the M plane. Since we
don't have the M plane yet, add a configuration option to set where
phase compensation is performed.
RRC Version is a required IE. Hence, implement the encoder and decoder
for this message. At the DU and CU, read the RRC Version we use and fill
the corresponding field.
Co-authored-by: Robert Schmidt <robert.schmidt@openairinterface.org>
In NSA, we don't have SIB1. However, the DU system information requires
both MIB and SIB1, but is itself optional. So, in NSA, don't fill the DU
system information.
The macrlc_has_f1 (static) variable was introduced to signal when we use
F1 in the configuration. It is superfluous: the node_type already passes
this information in a unique manner; hence, remove.
This commit introduces an additional (implicit) option that signals if
the E2 agent is to be activated or not. When reading the configuration,
we now check if all fields are set, and activate the E2 agent only if
this is the case. If not, we only print a warning and start the gNB
without the agent.
Note that previously, if not all fields are set correctly, the gNB
stopped.
To implement this behavior, it is necessary to change the defaults of
the RIC IP and the directory for SMs to a (non-NULL) default value.
Otherwise, the configuration system would not consider the field to be
set to the default, and wrongly assumes the field is set, even though it
is not; at least, this change is necessary to make config_isparamset()
return NULL if the configuration is not set.
3GPP has the concept of a gNB-DU ID and a (separate) gNB ID (for gNB,
CU). This commit introduces the gNB-DU as a separate ID that has to be
set in the configuration file. It is necessary, as some entities, e.g.,
the e2 agent, need to signal both IDs, e.g., to reconcile a CU and
(multiple) DU(s) belonging together.
Until this commit, the SIB1's PDCCH_configCommon was set (via a pointer,
i.e., an indirection) to the one of the ServingCellConfigCommon (SCC).
Afterwards, the SIB1 code further populated this PDCCH configCommon,
indirectly populating the one of the the SCC, on which code later
depends.
Not only did this create possibilities for double-frees (since freeing
the memory of SIB1, then SCC would free the PDCCH configcommon twice),
but also it makes it harder to track where certain structures are
populated. Hence, this commit solves both issues:
- The SCC is correctly populated on initialization of the SCC
- The SIB1 makes a deep copy of the SCC' PDCCH configCommon
This resolves the two issues above.
!SIB1 is not correctly filled! This commit does not work with COTS UEs!
The next commit fixes this.
- Move radio config (e.g., minRXTXTIME, SIB1 TDA, do_SRS, etc) down to
MAC.
- Some parameters in MAC are redundant: delete them.
- Remove call to nr_mac_config_scc() from RRC and simulators, the MAC
initialization routine calls it implicitly
Previously, filling of F1 Setup Request depended on reading the RRC;
hence, for timing reasons, we only initialized and sent the F1 Setup
Request once the MAC and RRC are ready.
After moving SCC, SCD, MIB, and SIB1 to MAC, the MAC does not depend on
an RRC being present anymore, and hence, the F1 Setup Request does
neither. In this commit, we read the F1 Setup Request after initializing
the MAC.
The MasterInformationBlock is handled at the DU and sent to the CU in
the F1 Setup Response. Hence, move it down to the MAC. Furthermore:
- Change type because MIB_PDU_t is 4G type
- Simplify schedule_nr_mib()
Note: the reestablishment is broken, and a later commit fixes it.
The ServingCellConfigCommon is an inherently radio-related
configuration. As such, it should be handled by the DU, not the CU.
Therefore, move it "down" to the MAC.
- send F1 Setup using callback
- store f1 setup req locally for reference
- check F1 Setup Req against RRC data structures:
* if matches: send F1 Setup Response using callback
* if not matching: send F1 Setup Failure using callback
- don't send CU config update by default, we don't need this
- if the Setup Response does not contain a cell, don't activate. It is
possible the CU sends a gNB-CU configuration update, which will
initialize the structures
Use a struct to initialize the RRC at the beginning, and remove the
NRRRC_CONFIGURATION_REQ. This message is not necessary; the RRC/CU
should be initialized from the F1 Setup Request, coming from the DU.
Before this commit, we did not read the ServingCellConfigCommon (SCC)
completely at start; rather, we read most (but not all) of it, then also
the minRXTXTIME, and at RRC initialization in
openair_rrc_gNB_configuration(), we filled the
pusch-TimeDomainAllocationList into the SCC, depending on the
minRXTXTIME.
The reason might be that we read part of the SCC, use that to fill the
NRRRC_CONFIGURATION_REQ, read also the minRXTXTIME (part of the RRC
config), and then we have all we need to "finalize the SCC". Since we
move everything to the MAC, I avoid too much upfront code changes,
hardcode the minRXTXTIME (and check with an assert), and undo this in a
later commit when the "RRC config" relevant for radio parameters, e.g.,
minRXTXTIME, is moved to MAC.
I verified the equality of the SCC before (at the end
openair_rrc_gNB_configuration()) and after (at the end of
get_scc_config()) this commit manually using a printf, assuming that
after RRC initialization, we didn't do any further modifications to the
SCC. But in fact, I cannot know that we don't do it...
francescomani