In the Initial Context Setup message, the NGAP forwards the AMF UE ID,
but not in the DL NAS Message, although 38.413 says, in $8.3.1.2 either
> The NG-RAN node shall use the AMF UE NGAP ID IE and RAN UE NGAP ID IE
> received in the INITIAL CONTEXT SETUP REQUEST message as identification
> of the logical connection
or in $8.6.2.2
> The NG-RAN node shall use the AMF UE NGAP ID IE and RAN UE NGAP ID IE
> received in the DOWNLINK NAS TRANSPORT message as identification of the
> logical connection
So forward in both cases for harmonization.
It might happen that the RRC does not know the AMF UE NGAP ID, yet. Even
in that case, we should forward the release request to the NGAP module,
which can either forward a message to the AMF, or reply back to release
the UE.
Reported-By: Jegor Zelenjak <jzelenjak@proton.me>
Integration: `2026.w02`
* !3828 L2 UE files code cleanup for static functions
* !3839 Couple rfsim fixes
* !3835 Correctly include cblas include directories for RHEL
* !3840 Fix missing return statements in SIB1 TDA validation
* !3836 move NTN UE L1 functions to a new file
* !3793 CI: Remove redundant Jenkinsfiles
* !3770 RRC UE: Implement proper NH chain synchronization for RRC Reestablishment
* !3843 fix(documentation): issue 1042
* !3842 Remove unused cmake_targets files
* !3832 Remove global iq_txshift and iq_rxrescale
* !3847 Minor CI and nr_ulsim reporting adjustments
* !3838 NR NGAP (N2HO) : Fix Time UE Stayed in Cell IE type and calculation
* !3677 Support prach with start symbol of PRACH not at symbol 0
Closes#1042 and #857
See merge request oai/openairinterface5g!3841
Support prach with start symbol of PRACH not at symbol 0
The following PRACH indice have been tested.
index / format (nf mod x = y) / Subframe/ start_symbol /no_of_slot / occ / duration
152 B4 2 1 4,9 0 2 1 12
151 B4 2 1 4,9 2 1 1 12
157 B4 1 0 4 0 1 1 12
159 B4 1 0 9 0 1 1 12
NR NGAP (N2HO) : Fix Time UE Stayed in Cell IE type and calculation
According to 3GPP TS 38.413, the 'Time UE Stayed in Cell' IE is an
integer ranging from 0 to 4095. This patch updates the data structure
to reflect the correct bit width and implements the dynamic calculation
based on the UE's residence time.
- Change time_in_cell from long to uint16_t in ngap_messages_types.h.
- Replace dummy value with real-time calculation in rrc_gNB_NGAP.c.
- Implement a ceiling of 4095 to comply with the 12-bit protocol limit.
Ref: 3GPP TS 38.413 Section 9.3.1.97
Refactor key derivation logic to properly handle Next Hop (NH) chain
synchronization according to 3GPP TS 33.501 specifications for both RRC
Reestablishment and Master Key Update procedures.
Changes in rrc_gNB.c:
- Clarify key derivation in rrc_gNB_generate_RRCReestablishment by explicitly
selecting base key (NH or KgNB) based on nh_ncc value
- Add comment explaining vertical vs horizontal derivation logic
Changes in rrc_UE.c:
Refactored the NH chain synchronization and key derivation code to match
TS 33.501 terminology:
- nr_sync_nh_chain(): Common helper to synchronize NH parameter chain per
TS 33.501 Annex A.10, supporting both Master Key Update and RRC Reestablishment
procedures
- nr_derive_kgnb_horizontal(): Derive KNG-RAN* from current KgNB when NCC values
match (horizontal derivation per TS 33.501 A.11/A.12)
- nr_derive_kgnb_vertical(): Derive KNG-RAN* from synchronized NH after NH chain
sync (vertical derivation per TS 33.501 A.11/A.12)
- nr_update_kgnb_from_ncc(): Unified function implementing TS 33.501 6.9.2.3.4
logic for updating KgNB based on received nextHopChainingCount
- Refactor as_security_key_update(): Use new nr_update_kgnb_from_ncc() helper
function for cleaner, more maintainable code
- Fix nr_rrc_ue_process_rrcReestablishment(): Properly handle received
nextHopChainingCount and update KgNB using unified helper function
- Replaced the previous nr_rrc_nh_update() helper with these functions to
improve clarity and alignment with the specification.
- Add debug logging for key derivation process
Key NAS deriver utils:
- update derive_kgnb documentation and protect input keys with const attribute
Closes#857
These files are not used anywhere. The only remaining cmake find files
are:
- findarmral and findxran: used by FHI7.2 driver
- findsctp: used by top-level CMakeLists.txt
- findgnutls: NOT actually used but GnuTLS is a dependency of websrv, so
I leave it for the moment (should be removed if the webserver is
removed)
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
There is no HSS/MME in this repository, which is the majority of this
file. Remove it, since it is outdated.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Setup routes was added by the author of FlexRAN. The UEs always set up
routes automatically, and this file is therefore not needed.
See-also: 287c182925 ("Remove FlexRAN")
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
According to 3GPP TS 38.413, the 'Time UE Stayed in Cell' IE is an
integer ranging from 0 to 4095. This patch updates the data structure
to reflect the correct bit width and implements the dynamic calculation
based on the UE's residence time.
- Change time_in_cell from long to uint16_t in ngap_messages_types.h.
- Replace dummy value with real-time calculation in rrc_gNB_NGAP.c.
- Implement a ceiling of 4095 to comply with the 12-bit protocol limit.
Ref: 3GPP TS 38.413 Section 9.3.1.97
RHEL uses a dedicated cblas include directory. Correctly include this
for the one target PHY_UE that relies on this.
Co-authored-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Integration: `2025.w52`
* !3809 [FHI72] Fix the PRACH FFT size
* !3829 Hotfix for handling the case where the number of physical antennas is larger than the number of logical antennas
* !3663 NR UE: calculate DL and UL Doppler based on SIB19 information in NTN mode, fixing LEO reestablishment
* !3819 CORESET start multiple of 6 fix
* !3641 automatic selection of SIB1 TDA
* !3804 gNB: apply new NR_CellGroupConfig when RRCReconfiguration is acknowledged
* !3833 Add missing CMakeLists entries for test_nr_frame_params
* !3656 Rfsimulator beam reception/transmission
Closes#1037 and #1002
See merge request oai/openairinterface5g!3830
Rfsimulator beam reception/transmission
A simplified beam switching simulation for rfsimulator. This works
mainly in 1 gNB - N UEs scenarios. This is not a real beamformer with
antenna, channel and propagation model. The way it works is that the
peers inform each other about the beams they transmit in, and on
reception before channel modelling, the beam data is combined based on
preconfigured rx_beam/tx_beam gain matrix.
Usage:
- Add --rfsimulator.enable_beams to enable beam simulation
- Add --rfsimulator.beam_gains .
Example list: 0,-5,-10
Resulting matrix:
[[0, -5, -10] [-5, 0, -5]] [-10, -5, 0]]
- Add --telnetsrv if you want to control the beams manually. The command
in telnet is "rfsimu setbeam <beam_map>", where beam_map is a uint64_t
controling the reception beam and transmission beam. If the
application is switching the beams automatically the beams will be
overwritten as soon as the application chooses to switch beams.
Supports up to 64 concurrent TX and RX beams.
gNB: apply new NR_CellGroupConfig when RRCReconfiguration is acknowledged
Currently part of the NR_CellGroupConfig is already applied when the
RRCReconfiguration message is created. This is not correct and this MR
fixes this by applying it when the RRCReconfiguration message is
acknowledged.
With this fixed, we also move disabling the feedback (in case
disable_harq is used) from the RRCSetup message to the
RRCReconfiguration message.
Closes: #1002
Add CLI parameter rfsimulator.beam_ids which uses a list of beam ids instead of a
beam map. The beam map API is still present and can be used interchangably.
Add telnet command setbeamids which has similar semantics
Allow arbitrary order of beam ids in set_beams2 function. This
allows the application to select any arbitrary order of beam ids.
The underlying transport mechanism still uses beam_map so the beam_ids
are ordered before sending.
Also replaced tx_beam_map/rx_beam_map into beam_map.
Also fixed an issue where --rfsimulator.enable_beams required an argument.
Robert Schmidt