It seems that the RA procedure in the gNB was modified so
the RAR is sent in a single tx_data_req. The emualted mode
was not previously handling this. We now only process the
PDU in the rx_ind that has a matching preamble. If any
other PDUs exist, we ignore them and only build Msg3 based
on this single matching RAR PDU.
Also, two bug fixes applied here in the emulate-l1 mode.
This struct is used to store the uplink 5G nFAPI
messages between the proxy and the gNB MAC layer.
The original OAI implementation utilizes a similarly
named variable (UL_info) to store the uplink 5G nFAPI
messages between the PHY and MAC layer. This commit
will utilize the original UL_info variable prior to
calling the handle functions. These changes allow us
to make minimal changes to the nFAPI handle functions
and modifies the NR_UL_Indication parent function instead.
-cell_config.phy_cell_id is a uint16 and was being push/pulled
as a uint8_t
-several members of the p5 message we not push/pulled
-the second member of the ssb_mask_list is causing invalid tag length
-the error code of the push response was push8 when it should have
been a push32
-packing vendor extension causes invalid tag id(0x000)
1. Reverts GTPU_need_ITTI back to develop
2. Removed gdb helper and co files
3. Reverts changes to logging mechanism
4. Reverts changes to assert that were unnecessary
5. Reverts changes to VNF that occured from a bad merge
6. Removes unnecessary else() in gNB softmodem
This change allows multiple UEs to have a tunnel interface
brought up when connecting to the 5GCN
Also, adding two new config files for mutltiple UEs
to connect to the 5GCN
When we check if the pointer is NULL before CALLOCing,
then the gNB will crash. It seems that we are mostlikely
leaking memeory since the gNB only crashes with the old
change. By reverting these changes, the gNB does not crash.
We are seeing UE-to-UE IP traffic on this commit when
the tunnel interfaces are established (~50% of the time).
In this commit, we changed the UCI handling.
When the UL_TTI_REQ arrives at the NRUE it
has info related to how many UCIs we should
pull from the queue and send to the gNB. If
we do not have that many UCIs available (likely
becasue a DL_TTI_REQ is late), then we will
requeue the UL_TTI_REQ and wait until we have
all the UCI indications before multiplexing.
This change makes it easier to handle multiple
UCIs becasue previously we would send what we
had and then try again later which made keeping
track of the UL_TTI_REQ and second UCI more
difficult.
Also, we had two heap-buffer-overflow crashes while
filling the CRC_IND and RX_IND. The corrected CALLOC
command is included in this commit as well.
Lastly, we included a better fix for handling late
DL_TTI_REQs. If the number of active harqs is larger
than the number of UCIs we have built, this is a good
indicator that the DL_TTI_REQ is late. To mitigate
problems, we will requeue the UL_TTI_REQ to when the
late DL_TTI_REQ comes in, we can handle the late
UCI that is built from it.
The nr_rrc_ue_process_RadioBearerConfig() function
call in the RRC layer of the NRUE was removed when
it should not have been for NSA mode. This is now
added back in for NSA mode. Also, the call to
pdcp_run should only be when were NOT in NOS1 mode
and ARE in SA mode. This was fixed as well.
Ue-to-Ue IP traffic in NSA works, but eventually
the NSA UE will crash due to an incorrect PDCCH
configuration. This is a bug we will need to look
into. It doesnt always crash, only about 40% of
the time. And even when the NRUE does crash, it
happens towards the end of the simulation.
This commit includes a hack fix that has allowed
the Ip traffic to work in SA mode. Furthermore,
NSA mode (without the EPC) works in this commit
as well with up to 4 NSA UEs. We will need to
understand better the issue with the UL_DCI
handling in the NRUE that was causing the gNB
to crash.
The AssertFatal in the gNB when the gNB runs out
of downlink HARQ PIDs is caused by the NRUE
receiving a UL_DCI and then building BOTH a UCI
and a CRC/RX pair. So we are essentially sending
a UL and DL DCI to the gNB in this case which
results in an unexpected HARQ PID being received
in the gNB. The filtering in this commit stops
the UCI being built in the NRUE when a UL_DCI
is recevied.
The IP traffic of a single NRUE works most
of the time in this commit. There seems to
be a bug in the gNB and it will occassionally
crash with a heap-buffer-overflow. This will
be looked at in the next commit.
The changes in this commit include gathering
all of the UCI indications in the queue that
have the same scheduled sfn_slot and sending
them as one aggregated UCI when the scheduled
sfn_slot matches the received ul_tti_request.
The following was changed in this commit:
- A new struct in the mac instance was created
for all emulated L1 fields.
- NR UE RRC state bug was fixed
- Checking the RAR rnti based on the MAC instance
ra.ra_rnti and not hardcoding to 0x10b
- Modified the name of the new emulate_l2 flag
to make sense: emulate_l1
Melissa