The data recording App includes the following files:
- The main app: data_recording_app_v1.0.py that has the data control service, interact with tracers, and data sync and conversion service
- The configuration file: common/utils/data_recording/config/config_data_recording.json
- The wireless dictionary file: common/utils/data_recording/config/wireless_link_parameter_map.yaml
- The SigMF Interface (common/utils/data_recording/lib/sigmf_interface.py) to store recorded data and meta-data in SigMF format
- A simple script (common/utils/data_recording/sync_validation_demo.py) to validate that the recorded bits from gNB and UE are in Sync
- For more info look to doc/data_recording.md
A squashed commit further updates:
- Enhance Data Recording App structure
- Support the new state machine of T-Tracers
- Add new files for Config Interface, sync Service, def of data recording messages, and common utilties
- Make part of logging on Terminal configurable
- Add _tracer_app_gnb and t_tracer_app_ue apps to common/utils/T/tracer/Makefile
- Add Data collection Service for gNB: common/utils/T/tracer/t_tracer_app_gnb.c
- Add Data Collection Service for UE: common/utils/T/tracer/t_tracer_app_ue.c
- Add Shared memory configuration (common/utils/T/tracer/shared_memory_config.h),
since We will have too much memory consumption on the stack if the
T-tracer is not fast enough to process the traces or if we have too
much traces. As a result, tracers start to capture data, write data in
shared memory, then close the T-Tracer after getting the recording of
N slots
- Support the operation of : COnfig, Record, and Stop
- Poll from Socket and not use get_events to mitigate long-time waiting
if there is no data in buffer or the UE is already released or crashed
- Add extra offset to improve data sync
- Update input parameters to nr_ulsch_encoding () in
nr_transport_proto_ue.h to get number_dmrs_symbols to be added to
meta-data.
- In nr_ulsch_coding.c: Trace UE PHY UL Payload TX bits (T_message:
T_UE_PHY_UL_PAYLOAD_TX_BITS) including related meta-data and UTC time.
- In nr_ulsch_ue.c: Trace UE PHY UL Scrambled TX bits (T_message:
T_UE_PHY_UL_SCRAMBLED_TX_BITS) including related meta-data and UTC
time.
- Fix the input prameters in nr_ulsch_encoding () called in
(openair1/SIMULATION/NR_PHY/ulschsim.c) since a new input parameter
has been added.
- The required memories have been created and initialized in:
openair1/PHY/NR_TRANSPORT/nr_ulsch_demodulation.c
- Those memories: memory for DMRS signals, memory for channel estimates
based on DMRS positions, memory to store slot grid with channel
coefficients based on DMRS positions after interpolation, and memory
to store extracted data including PUSCH + DMRS.
- The input parameters to nr_pusch_channel_estimation() has been updated
to get the pointer to the added memories of pusch_dmrs_slot_mem and
pusch_ch_est_dmrs_pos_slot_mem
(openair1/PHY/NR_ESTIMATION/nr_ul_estimation.h)
- The DMRS grid of NR slot and the estimated channel coefficients at
DMRS locations are logged to created memories in:
openair1/PHY/NR_ESTIMATION/nr_ul_channel_estimation.c
- The function inner_rx in
openair1/PHY/NR_TRANSPORT/nr_ulsch_demodulation.c is updated to log
the extracted ULSCH PRBs and the interpolated channel coefficients.
- The T-macro() has been called in
(openair1/PHY/NR_TRANSPORT/nr_ulsch_demodulation.c) to trace added
traces: T_GNB_PHY_UL_FD_DMRS, T_GNB_PHY_UL_FD_CHAN_EST_DMRS_POS,
T_GNB_PHY_UL_FD_PUSCH_IQ, T_GNB_PHY_UL_FD_CHAN_EST_DMRS_INTERPL
Integration: `2025.w29`
* !3346 Add WLS as a transport option for VNF/PNF, refactor existing options
* !3455 RF simulator: Fix concurrency issues during new client connections
* !3515 Extended changes to "Initial support for RedCap" feature in gNB
* !3510 NR UE: fix PDSCH overlap with ZP CSI-RS case
* !3512 speedup NR RLC RX for AM
* !3528 fix(RLC): Count dropped DL SDUs by the RLC
* !3486 NR UE: Enable additional PDU session
* !3225 Measurement gaps
* !3526 CI: migrate RFSim5G to acamas machine
* !3527 CI: Change RU in Aerial setup from Foxconn to WNC
See merge request oai/openairinterface5g!3525
CI: Change RU in Aerial setup from Foxconn to WNC
- Change frequency in the gNB config file, from 3.75GHz to 3.5GHz
- Add high throughput tests with may_fail tag (1Gbps in DL and 90Mbps in UL)
- Update Aerial tutorial to match the changes
NR UE: Enable additional PDU session
- fix a bug with wraparound of buffer_remain_ep
- Add --extra-pdu-id command line option
Testing procedure:
1. Start cn in openairinterface5g/doc/tutorial_resources/oai-cn5g with
docker compose up
2. Start gnb:
sudo ./nr-softmodem -O ../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf --gNBs.[0].min_rxtxtime 6 --rfsim --rfsimulator.server_address server
3. Monitor extra interfaces being created:
watch -n 0.5 "ifconfig | grep tun"
4. Start UE:
sudo ./nr-uesoftmodem -C 3619200000 -r 106 --numerology 1 --ssb 516 --band 78 --rfsim --uicc0.imsi 001010000000001 --extra-pdu-id 11
5. An extra tun interface oaitun_ue1p11 should be created. Observe in
the terminal from step 3
6. Ping the core network from both interfaces, e.g., ping -I
oaitun_ue1p11 10.0.0.1, ping -I oaitun_ue1 10.0.0.1. This should
generate traffic on the gNB on different LCIDs.
Measurement gaps
Scheduling measurement gaps to provide sufficient time for the UE to
re-tune its transceiver to the target carrier, complete the set of
measurements and then re-tune its transceiver back to the original
carrier.
This commit reduces the UL throughput target in the 2x2 test to align
with the host’s performance capabilities. The adjustment ensures more
reliable and consistent CI results.
Based on observations from testing on acamas, the interval between DL
disruption and the UE synch check needs to be increased - the UE takes
longer to go out of sync . A sleep of 15 seconds has proven to be a
reliable value to ensure constant results.
fix(RLC): Count dropped DL SDUs by the RLC
When a downlink SDU was discarded by the RLC Acknowledged Mode entity
due to a full transmit buffer (tx_maxsize), the drop statistics were not
being updated. The txpdu_dd_pkts and txpdu_dd_bytes counters remained at
0. It should be noted that while the statistics are named txpdu_dd_*,
the drop at this stage occurs at the SDU level.
speedup NR RLC RX for AM
rx_list is replaced by an array of size 2^(SN size - 1) which is 131072
for an SN size of 18 bits, leading to 1048576 bytes of memory used.
(Less for smaller SN sizes.)
A lot of RX processing was to run through rx_list. When the list was big
(with some non-ideal channel), it can take some time. Removing this list
should improve things. Checking with benchmark_nr_rlc_am_entity a
speedup of more thant x10 is achieved (except for the case 1024 which is
surprisingly faster than the others in the develop branch).
The only thing that may be slower is when looking for cur->next where
the SN is different, in which case we need to look for all SN one by one
until we find something or reach the limit (rx_highest_status). These
are the functions get_first_rx_pdu() and get_next_rx_pdu().
Add SYS_NICE capability to enable setting thread priority and affinity
in rfsim5g tests. This improves execution speed in test cases with
heavier processing workloads.
When migrating from RHEL (on cacofonix) to Ubuntu 22.04 (on acamas), the `nc`
command needs to be replaced by `ncat`. The version of `nc` available on Ubuntu
is the OpenBSD variant, which lacks support for some options used in our scripts.
`ncat` from the Nmap is used instead.
RF simulator: Fix concurrency issues during new client connections
- Fix concurrency issues happening when a new client connects, sometimes
leading to a total softmodem deadlock.
- trace in 4G RAR processing to debug ci result
Add WLS as a transport option for VNF/PNF, refactor existing options
This MR adds a new transport mechanism for the VNF and PNF split, using
the Intel WLS library, which makes use of DPDK and shared memory to
transport messages. This transport mechanism is what is used to
interface with Radisys ODU, while also working with OAI VNF/PNF.
The VNF and PNF have been refactored so that the transport-specific
functions are isolated from the rest of the logic, and as such,
interchangeable by means of function pointers.
The same change is done for the packing/unpacking procedures, allowing
to switch between FAPI and nFAPI encoding.
This MR also reduces the amount of duplicated code, by refactoring the
VNF with Aerial, which now only has the transport-relevant functions, as
well as the ones that are unique to it ( for example, the unpacking
procedures where a secondary data buffer is used for the message
payloads )
Additionally a new callback is added to the VNF to process
ERROR.indication messages, which currently only indicates which message
originated the error, and which error occurred.
When a downlink SDU was discarded by the RLC Acknowledged Mode entity due to a full transmit buffer (tx_maxsize), the drop statistics were not being updated.
The `txpdu_dd_pkts` and `txpdu_dd_bytes` counters remained at 0.
It should be noted that while the statistics are named `txpdu_dd_*`, the drop at this stage occurs at the SDU level.
Add nr_fapi_p5 library to the simulators common library for access to the utility function `copy_config_request`
Add dummy VNF/PNF functions to be referenced by lte-softmodem, before LTE and NR implementations of the VNF/PNF are separated
Add a section in nfapi.md related to the different transport mechanisms available for VNF/PNF communication
Edit NR_NFAPI_archi.md to describe the VNF and PNF processing logic, as well as adding a flowchart for each of the components execution
Add the necessary patch to install the WLS library in the system
The changes done in this commit are to contribute the supporting changes
for the existing "Initial support for RedCap" feature in gNB.
In this patch, handle and store the RedCap related IE's present in "NR
UE Capability Information" msg which are
- 'supportOfRedCap-r17'
- 'supportOf16DRB-RedCap-r17'
- 'longSN-RedCap-r17'
- 'am-WithLongSN-RedCap-r17'
use 'longSN-RedCap-r17' and 'am-WithLongSN-RedCap-r17' IEs to set the SN
length to either 12 Bit or 18 Bit accordingly.
Previously, we only supported intra-frequency handovers, so the
measurements where only for intra-frequency, reusing the same
measurement object. Now that we would support inter-frequency handover,
also add multiple MeasObjects for each neighbor.
Add some helper functions that will be used by the MAC handler to fill
the right MeasGap configuration based on Measurement Configuration sent
by the CU, in the next commit.
Checks whether there are at least 4 bytes available to pull tag and length values.
On tlv_list unpack, if the size is sent as 0, immediately exit the function
Created a function nr_error_ind_cb for the VNF that takes a received ERROR.indication and shows some details regarding the reported error from the PNF, since up until now it was not handled and treated as an unknown message.
Proper error handling procedure not created, only shows that the error occurred.
Abdo-Gaber