Remove the runtime, which is not interesting, and add instead
- test name and if the test failed
- the threshold checks, if any, and
- possible additional information about test failures.
Prior to this change, each test would have, as label, it's description.
This leads to many labels, which are normally reserved for grouping
tests. Move the description into a custom property instead.
Since we rely on the JSON output for the generation of HTML reports, we
need to also extract the description from the generated JSON. However,
custom properties are only logged starting from cmake 3.30. For
back-wards compatibility, write an additional, separate environment
variable TEST_DESCRIPTION from which the description can be read as a
fallback.
For the add_timed_physim_test(), this has been already done in a parent
commit.
The unit tests have been imported with this command:
xmlstarlet sel -t
-m '//testCaseList/testCase[class="Run_Physim"]' \
-v "concat('add_timed_physim_test(physim.5g-offload.',physim_test,'.testX.Y \"',desc,'\" ',physim_test,' ',physim_run_args,')')" \
-n t2_offload_enc_nr_dlsim.xml t2_offload_dec_nr_ulsim.xml >> ../../openair1/SIMULATION/tests/CMakeLists.txt
The next commit will further cleanup this output. I commit it like this
for verification purposes.
Add two new macros that allow to register physim tests for ctest,
including timing thresholds that should be fulfilled.
First, add_timed_physim_test() registers a new test using a helper
script RunTimedTest.cmake. This is because after test execution, we need
to analyze logs, and the recommended way to do multiple steps in one
test is via a helper cmake script:
https://cmake.org/pipermail/cmake-developers/2016-February/027816.html
Second, check_physim_threshold() adds new thresholds. It takes a text to
be parsed, and a condition (e.g., "< 20") to check for the number
following the threshold (which is assumed to be present right after the
threshold). It uses a test property to count the total number of checks
(limiting them to 10), and sets environment variables for the script. I
initially planned to use a test property for checks, but those are only
valid in the same directory, and RunTimedTest.cmake seems to be assumed
by cmake to be "elsewhere", hence I needed to resort to environment
variables.
RunTimedTest.cmake is called through cmake with the test parameters and
checks. It re-constructs a list of checks [1], runs the test, and pipes
the log into a separate script that is passed all checks (see below).
Afterwards, it verifies that both the test and script passed.
A script analyze-timing.sh builds an awk script from the checks passed.
The script analyzes each line of the test output for the threshold, and
compares against the threshold. analyze-timing.sh returns success if all
checks passed.
[1] I did not manage to pass a "list" of checks in a single environment
variable through the check_physim_threshold(), which would be simpler.
Change signature of the macro to take the full test name, a separate
description (previously called a label?), and the executable and test
invocation. The overall signature becomes easier.
The rational for the full test name is that a later commit will
introduce the possibility to define physim tests that are checked for
specific times, in which case we need to reuse the test name. Thus,
using the full name from the beginning leads to more clarity, even
though they are a bit longer.
Add an additional safety check that the given simulator is actually a
target defined within the project (in other words, it actually exists).
Update the documentation correspondingly.
Most (but not all) physical simulators are defined under
openair1/SIMULATION/. Defining physical simulators below there seems to
be the more "obvious" directory anyway, as the physical simulators are
openair1/SIMULATION/tests
Phy(L1) Sim tests => PhySim (tests)
A future commit will enable to deploy physical simulators via docker.
Hence:
- Move the script to run out of deploy_oc_physim(), to make it more
generic (later commits will introduce other scripts)
- pass the working directory (the function will be moved into
cls_oaicitest, as it fits neither cls_containerize nor cls_cluster
when deploying the tests from source)
- not using ci-scripts: don't hardcode a specific path, just use the
working directory
- avoid helm-specific pods summary, and put it into the general "physim
logs"
- remove helm-specific "release", and use a generic name for results
- always log pod logs and status to debug, even if deployment was not
successful or tests did not finish.
Instead of making the function a class member, make it an instance
member because (1) it is more aligned with other functions, notably,
run(), and (2) especially for RemoteCmd() it can be faster, as
successive exec_script() calls do not require a new SSH connection.
Integration: `2025.w36`
* !3613 Speedup complex rotate for aarch64
* !3614 Ldpc encoder zc384 optimization
* !3625 gNB scheduler small fixes
* !3629 Fix for gNB max feedback time parameter
* !3619 Fix RA 2-Step MgsB Ack at UE
* !3626 Upgrade CI to Aerial 25-2
See merge request oai/openairinterface5g!3627
Fix for gNB max feedback time parameter
This bug is causing assertions like the following
Assertion (curr_pucch->active == 0) failed!
In nr_csi_meas_reporting() /oai-ran/openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_uci.c:282
CSI structure is scheduled in advance. It should be free!
because the PUCCH structure would be smaller than it should be causing
overlapping.
gNB scheduler small fixes
A couple of fixes in gNB scheduling function. Removing a superfluous input from
CCE function and adding a missing call to reset beam allocation.
Ldpc encoder zc384 optimization
This is a modification for the ldpc encoder which improves performance for
high-throughput cases. It contains a newly-generated file for innermost part of
the parity bit generation which, for AVX512, uses the mm512_permutex2var_epi8
instruction and for 128-bit (aarch64) the mm_alignr_epi8 (vextq_s8) in the
computation corresponding to each non-zero bit of the H matrix. This allows for
removing a very large memcpy and reduces the memory demand for the parity matrix
computation. For the moment this is limited to largest case in BG1, namely
Zc=384. This is the only format used when the number of segments after codeblock
segmentation is large (>8). This improves the timing required for ldpc parity
bits generation by more than a factor 2 with AVX512. This significantly reduces
the total time to generate the DLSCH/PDSCH.
See the merge request description for numbers.
Speedup complex rotate for aarch64
This is a simple optimization for aarch64 for the "rotate_cpx_vector" used for
the phase_rotation in 5G NR. It provides a speedup of around 1.5 on high-end
aarch64 targets compared to the SIMDe translated version. It is implemented with
native NEON intrinsics and was largely inspired by suggestions from ChatGPT 5 :-)
newly-generated files for innermost part of the parity bit
generation which, for AVX512, uses the mm512_permutex2var_epi8
instruction and for 128-bit (aarch64) the mm_alignr_epi8 (vextq_s8) in
the computation corresponding to each non-zero bit of the H matrix.
It is generated with ldpctest -n0 -g1. the changes for this are in a
future MR. I did these changes to compare with the GPU version
(ldpc_encoder_cuda), so that the CPU version is as fast as possible. The
generator will come when we merge the GPU encoder/decoder which also has
a generator for the CUDA version. it was difficult to extract the
changes in ldpctest/ldpc_encoder.c so I just took the generated file.
This allows for removing a very large memcpy and reduces the memory
demand for the parity matrix computation. For the moment this is limited
to largest case in BG1, namely Zc=384. This is the only format used when
the number of segments after codeblock segmentation is large (>8). This
improves the timing required for ldpc parity bits generation by more
than a factor 2 with AVX512. This significantly reduces the total time
to generate the DLSCH/PDSCH
Redirect to files and manual analysis as done in this Dockerfile is not
necessary since we just output all relevant build files to stdout.
Simplify to do the same here.
See: 35361db76b ("build_oai: don't redirect compilations to a file")
Fix OAIUE-OTA pipeline and increase tested traffic
I tried to "fix" the OAIUE pipeline in !3610 (merged) for making it more reliable, but inadvertently introduced many ULSCH DTX for UL traffic. Fix this, and increase DL traffic.
See merge request oai/openairinterface5g!3621
Robert Schmidt