DLSCH encoding is not concerned with HARQ processes directly. Instead,
it gets the redundancy version and encodes a specific redundancy version
for a given TB. The rest is up to the MAC, the L1 is stateless in that
regard. Hence, remove the HARQ type and put it into DLSCH, which also
simplifies the code elsewhere.
Similarly to the parent commit, simplify the array type to the FAPI PDU
towards further refactoring, and encapsulate the code in a function for
easier reuse in a later refactoring step.
Note on ZP-CSI: after this commit, we continue treating CSI PDUs. The
prior code was returning, which I think is wrong (as this information is
only for the currently treated CSI-RS PDU).
There is no point in tracking the "active" state: the SSB PDU will be
sent from MAC to L1, encoded, and then "discarded" (by marking the
number of SSB PDUs as 0). Hence, remove this intermediate type.
Both (DL) PDCCH and UL PDCCH PDU types are fundamentally of the same
type, so correct the array's type to facilitate refactoring later (a
later commit will reuse a single "generate DCI" function for both
cases).
Using nFAPI introduces additional delays. At the same time, RFsim does
not run in real-time, and we can allow a low sl_ahead, as RFsim will
"wait" for the gNB.
Therefore, reduce sl_ahead to ensure that the response window does not
run out during handling of RA in nFAPI.
Integration `2025.w45`
* !3736 fix bugs in scope for pdcch, and optimize cpu cost of pdcch decoding
* !3743 NR UE: fix PDCCH LLR indexing for different search space RB sizes
* !3739 Bugfix: save old tunnel info to remain the user plane connection while rolling back to source DU due to handover failure
* !3742 Simplify node management in CI, handle SIGINT
* !3670 PRS bug fix and CI Integration
* !3746 Fix unsigned to signed decoding parameters to allow for 'no affinity'/'no pin' threads to CPUs
* !3738 CI: Add new Jenkinsfiles
Closes#984 and #1021
See merge request oai/openairinterface5g!3744
CI: Add unified Jenkinsfile for all test pipelines
This MR introduces a single Jenkinsfile to cover all current CI test pipelines
Improvements:
- correct reporting of the start timestamp in the HTML report
- harmonize log collection - always collect as test_logs_${env.BUILD_ID}.zip
Fix unsigned to signed decoding parameters to allow for 'no affinity'/'no pin'
threads to CPUs
By default, 'L1_rx_thread_core', 'L1_tx_thread_core', 'ru_thread_core' are set
to '-1' but the values were decoded from config file as unsigned instead of
signed types, thus, it was not allowing to set them with '-1' from config file.
PRS bug fix and CI Integration
- Fix the bug in PRS channel estimation while copying memory to compute the
impulse response
- Integrate PRS testing to CI
Simplify node management in CI, handle SIGINT
- Make a single <node> XML step entry common to all XML steps to harmonize code
- Handle SIGINT to make it possible to more easily stop the CI script.
Bugfix: save old tunnel info to remain the user plane connection while rolling
back to source DU due to handover failure
This MR closes issue #984 that UE lost the data plane connection while rolling
back to the source DU due to handover failure.
NR UE: fix PDCCH LLR indexing for different search space RB sizes
After !3603 (merged), when multiple search spaces have different CORESET
configurations (different number of RBs), the LLR buffer stride must be
calculated based on the maximum RB size across all search spaces, not the
current search space's RB size.
The LLR buffer is allocated with size based on get_pdcch_max_rbs(), but the
demapping function was using coreset_nbr_rb (current search space) for symbol
stride calculation, causing incorrect LLR extraction when search spaces have
different RB configurations.
This MR tries to fix it.
Closes#1021
By default, 'L1_rx_thread_core', 'L1_tx_thread_core', 'ru_thread_core' are set to '-1' but the values were decoded from config file as unsigned instead of signed types, thus, it was not allowing to set them with '-1' from config file
This commit inputs several distances at once and obtain the summary of
successful and failed tests. We look for the number of successful tests
that are geater than 0. We do that here since we sometimes dont receive
a response for a telnet command from the rfsim although the command
is applied. This is related to the queing telnet commands in the rfsim.
The script for the distances 50, 100 and 150 are called as follows,
./set-and-verify-distance-prs.sh 50 100 150
The summary can be viewed as follows,
==================== SUMMARY ====================
Total tests run : 3
Successful tests: 3
Failed tests : 0
=================================================
Set RFsim (DL) distance and use PRS to estimate the new distance. This
is verified by comparing the distance set in RFsim with the distance
reported through ToA estimation at the UE.
Note that since RFsim telnet output is asynchronous (it uses a queue
internally), we use grep --max-count 1 to wait for the matching line,
together with ncat --idle 0.3 to keep ncat open for some time. The
--max-count option will terminate grep after the first occurrence. For
this to work reliably, we need to use grep <(echo | ncat) as opposod to
simply echo | ncat | grep, as the latter does not seem to reliably
make grep exit after the occurrence.
Co-authored-by: Robert Schmidt <robert.schmidt@openairinterface.org>
fix bugs in scope for pdcch, and optimize cpu cost of pdcch decoding
fix bugs in scope for pdcch, and optimize cpu cost of pdcch decoding by not
processing useless samples in one symbol
When multiple search spaces have different CORESET configurations
(different number of RBs), the LLR buffer stride must be calculated
based on the maximum RB size across all search spaces, not the
current search space's RB size.
The LLR buffer is allocated with size based on get_pdcch_max_rbs(),
but the demapping function was using coreset_nbr_rb (current search
space) for symbol stride calculation, causing incorrect LLR extraction
when search spaces have different RB configurations.
Handle SIGINT and mark any subsequent steps as failed. Receiving SIGINT
a second time will abort the script immediately (as is the case before
this commit).
Note that Python seems to relay the signal to the "controlled" process
(e.g., Ping), which would return immediately with an error. So some
steps like Ping will abort immediately, others (e.g., IdleSleep) will
finish their step, and then the present logic will mark subsequent steps
as failed.
Some CI tasks/commands like Iperf(), Ping() get multiple nodes (via XML
parameter "nodes") to potentially run UEs on different nodes (hosts) at
the same time. However, I argue that this is not good:
- we don't actually use this -- where we specify multiple UEs, it's
always "localhost localhost..."
- it is inconsistent, as we typically have a single "node", not nodes,
and there is a possibility to harmonize (see also next commit)
- if we needed it, there would be better ways to achieve the same.
First, for hardware-based UEs, the ci_infra.yaml can specify different
UEs. For simulated UEs, it would be feasible to have multiple XML
steps run in parallel, e.g., in the XML <parallel> tag, which would
clarify that multiple UEs on different hosts run in parallel
- it reduces code.
Hence, make a single <node> for these XML steps.
Created Jenkinsfiles:
- Jenkinsfile: for stadard test pipelines
- Jenkinsfile-oc: for deployments with OC
These 2 Jenkinsfiles covers all current test pipelines.
Previously, we were using int16_t for the variable ch_tmp which was later harmonized to use c16_t while leaving <<1. This introduced the bug while accessing the address of the element at first_half of the ch_tmp variable.
Integration `2025.w44`
* !3721 improvements in formatting and LOGs in DMRS common functions at MAC
* !3725 Handle GTP receiver errors, fix memory leaks, add CU-UP test
* !3726 fix for CSI payload sizes in PUCCH structure at UE
* CI: Adjust attenutation for HO setup
* !3728 Fix for scenario with no CSI report configured for CSI-RS
* !3731 CI: ensure clean iperf3 server startup
* !3592 Refactor PRACH handling at the gNB
* !3682 Refactor DLSCH scheduler
* !3733 Clarify whitespace
* !3706 Change registry name env var content
Closes#1015 and #1014
See merge request oai/openairinterface5g!3727
Change registry name env var content
Currently setting REGISTRY="" in a .env file results in docker failing to find
/image-name:tag. This corrects that, so it looks for local images named
image-name:tag.
Following the change to use:
image: ${REGISTRY-oaisoftwarealliance/}${GNB_IMG:-oai-gnb}:${TAG:-develop}
the REGISTRY variable must now include the trailing slash.
Robert Schmidt