function returns mu of UL BWP if msg1-SubcarrierSpacing absent instead
of asserting. The mu retured by this function is used to compute the
slot number of PRACH. In case of long format, the slot number is as per
UL mu.
During re-establishment we still have a valid SIB1 so we don't decode it
again. Then the UE never moves out of UE_RECEIVING_SIB, making
re-establishment impossible. This fixes addresses this.
Fixes: 11b87d8744 ("NR UE: RRC layer now explicitly tells MAC layer
when the RA procedure can be started)"
fix NTN LEO scenarios
- gNB: add support for NTN parameter ta-CommonDrift-r17
- NR UE: fix application of NTN TA information
- NR UE: add command line parameter ntn-initial-time-drift to compensate
time drift during initial sync
- NR UE: fix writeTimestamp inconsistencies
- NR UE: add MAC state UE_RECEIVING_SIB ensuring to start RA only after
successfully receiving SIBs
- rfsimulator: update earth radius for LEO simulation to match UE
position in ue.conf file
- update conf files for NTN LEO scenario
- update description how to run NTN scenarios in RUNMODEM.md
- fix: ta-Common is a round-trip-time, not a one-way delay
- NR UE: simplify calculation of next_tx_slot_and_frame by moving up
assignment of duration_rx_to_tx
- cellbarredNTN indicates notbarred in SIB1 if NTN access is available
- Removed b66 NTN and enabled B254 NTN conf file in CI
- NR UE: RRC layer now explicitly tells MAC layer when the RA procedure
can be started
- move NTN LEO config to band 254 and update doc/RUNMODEM.md
Closes#901
The aggregation level search order for PDCCH candidates is modified:
- the search starts from desired_agg_level_index, which is a value from 0 to 4
proportial to pdcch_cl_adjust.
- pdcch_cl_adjust is a value between 0 and 1 that indicates PDCCH channel quality
by averaging HARQ DTX rate. A value of 0 means perfect channel, a value o 1 means
impaired channel.
E1AP enc/dec lib improvements
This MR is including some fixes and improvements for the E1AP library,
focusing mostly on Bearer Context Management:
- struct reorganization: split setup and modification request messages
into distinct structures, ensuring compliance with 3GPP TS 38.463
specifications
- add encoding/decoding sub-functions for different IEs
- improvements to Bearer Context Management: Implemented various
improvements to the E1 Bearer Context Setup Response and Request,
including the adoption of encoding/decoding sub-functions for
different IEs
- use lib functions whenever need (e.g. cp_bearer_context_setup_request
in cucp_cuup_e1ap.c)
- handle optional struct members as pointers
- updated copy/equality check utility functions
EDIT: The MR is also including the changes from !3222 (closed):
> While testing E1 with security enabled for DRBs, it was found that
> data traffic was not functional.
>
> The problem was that security settings were modified in the PDCP
> reestablishment happening when receiving Bearer Context Modification
> Request.
>
> So some restructuring was done.
>
> The actual fix is in 18176297, the others are for support. Basically
> we introduce a boolean to check if the security settings are present in
> Bearer Context Modification Request and we change PDCP security settings
> only if they are.
>
> (Note that in OAI CU security settings are not sent in Bearer Context
> Modification Request, so we could also remove all this, but we need to
> be compatible with other cu-up and/or cu-cp.)
Added Support of 35Mhz,45Mhz,70Mhz Bandwidth
Added Support of 35Mhz,45Mhz,70Mhz Bandwidth for 30Khz Subcarrier
Spacing, Also added 35Mhz, 45Mhz bw for 15Khz Subcarrierspacing.
Referred Spec TS 38.101 v18.6.0 section 5.3.2, table 5.3.2-1
Reset E1 UE contexts after E1 Setup Response
38.463 sec. 8.2.3 says
> This procedure also re-initialises the E1AP UE-related contexts (if
> any) and erases all related signalling connections in the two nodes
> like a Reset procedure would do.
Hence, delete all contexts after reception of E1 Setup Response. This
minimizes a risk of receiving an E1 bearer setup req for an existing UE,
which currently leads to an assert [we trust the CU-CP does not send the
same UE ID twice, as we only "mirror" the existing UE ID]. After this
MR, this is what happens if these entities fail:
- CU-CP fails: all context lost implicitly, upon reconnection, both DU
and CU-UP reset all contexts (like "start from zero")
- DU fails: CU-CP triggers NGAP UE context release request immediately
(radio connection with UE lost), all UE contexts attached to this DU
cleared (like "start from zero" for affected DU)
- CU-UP fails: initially, nothing (UE has no user plane); upon
reconnection of CU-UP, CU-CP triggers NGAP UE context release request
(cause radio connection with UE lost) and sends F1 Reset to DU, all UE
contexts associated to this DU cleared (like "start from zero")
for the last case, a possible improvement could be to use the F1 Reset
message to only clear affected UE conetxts. I chose not to do this,
because this MR is very big now already, and possible "victim" UEs
that were not at that CU-UP will reconnect as well
If the Bearer Context Modification Request does not contain security
information, the PDCP entity shall keep the currently configured security
settings.
Passing -1 for ciphering_algorithm and integrity_algorithm is the way
to implement this logic.
Bearer context setup request and modification request messages
differ in various IEs according to 9.2.2 of 3GPP TS 38.463, e.g.
the Bearer context setup request does not contain a list of
DRBs to modify and does not contain an UP TL configuration.
Thus, the goal of this commit is to split the setup request message
and the modification request into two different structs:
* adopt e1ap_bearer_mod_req_t where necessary (e.g. fill_e1_bearer_modif)
Also, reorganized existing struct members according to specs:
* remove irrelevant struct members from the setup request
* group members from the same IEs into structs
* set optional struct members IEs as pointers
* add and adopt enc/dec/cp/eq lib functions for single IEs
* add UP_TL_information_t struct with TEID and TL address info and adopt in stack
* use int instead of long for count types
* update the relevant copy/equality check utility functions
Extra:
* add a function to handle Security Information in RRC in the process
* add create_up_tl_info and adopt in unit tests
38.463 sec. 8.2.3 says
> This procedure also re-initialises the E1AP UE-related contexts (if
> any) and erases all related signalling connections in the two nodes like
> a Reset procedure would do.
Hence, delete all contexts after reception of E1 Setup Response. This
minimizes a risk of receiving an E1 bearer setup req for an existing UE,
which currently leads to an assert [we trust the CU-CP does not send the
same UE ID twice, as we only "mirror" the existing UE ID].
Downgrade gNB power limit LOG from "warning" to "debug"
Downgrade the UE power limited LOG from LOG_W to LOG_D. This is to avoid
flooding stdout when UE in low coverage enters power limited state for a
longer period of time. The same information can be inferred from the
periodic UE print which also contains PH value (negative PH values
indicate that the UE is power limited)
Also, correct some typos in PH calculation.
Closes#885
Changes to support multiple TDD patterns
- Updated the configuration changes for 2 Patterns
- Update the TDD table configuration for NFAPI
- Added the tdd bitmap for the period
- Adapted the bitmap for UL/DL for the multi TDD pattern
- Updated the RACH procedure for multi TDD pattern
- Updated DL and UL scheduler for multi TDD pattern
* Remove the ulsch_slot_bitmap and dlsch_slot_bitmap from nrmac
* Adopt the new is_dl_slot/is_ul_slot functions in the stack
to replace is_xlsch_in_slot: these functions are getting
the DL and UL slots as they are set in the TDD configuration
stored in tdd_slot_bitmap (frame_structure_t)
* Keep is_xlsch_in_slot in openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_phytest.c:
this is necessary because the phy-test pre-processors are using the bitmaps
dlsch_slot_bitmap and ulsch_slot_bitmap to check which DL/UL slots to use
for transmission among those set in the TDD configuration
Co-authored-by: Guido Casati <guido.casati@firecell.io>
Downgrade the UE power limited LOG from LOG_W to LOG_D. This is to avoid flooding
stdout when UE in low coverage enters power limited state for a longer period of
time. The same information can be inferred from the periodic UE print which also
contains PH value (negative PH values indicate that the UE is power limited)
* is_ul_slot: returns `true` for UL or mixed slots
* is_dl_slot: returns `true` for DL or mixed slots
* is_mixed_slot: returns `true` for mixed slots
These functions use the TDD slot bitmap for slot type checks
Co-authored-by: Guido Casati <guido.casati@firecell.io>
* the function is returning the index of the first full UL slot in tdd_slot_bitmap
or the first UL slot (including mixed) if the "mixed" flag is provided
* the get_ul_slot_offset function calculates the offset of the nth uplink (UL) slot for a given UE index within a TDD period
* this function uses the frame structure bitmap to determine the UL slot positions
* use config_frame_structure in config_common:
- fill frame_structure in MAC and NFAPI Config Request
- use get_tdd_period_idx to set periodicity index in Config Request
- use config_tdd_patterns to fill tdd_period_config
- use set_tdd_config_nr to complete NFAPI Config Request configuration
Co-authored-by: Guido Casati <guido.casati@firecell.io>
Sakthivel Velumani