Introduce SRS physical simulator and improvements
This MR consists of two parts:
- Introduces SRS physical simulator to test different configurations of
SRS
- Improvements in the SRS channel estimation (Addressing the comments
from old, unfinished MR !2875)
- rewrite nr_srs_channel_estimation() to loop over rx antennas and
antenna ports to be able to parallelize
- Improvements in timing_advance_offset and timing_advance_offset_nsec
computation
- Introduce SRS multi-symbol channel estimation
- The channel impulse response is estimated from the averaged
channel frequency response over multiple symbols
- The channel frequency estimates are left as they are to be able to
estimate doppler in the future
- Simplify SRS channel estimation to handle memory alignment in the
case of different SRS configurations (eg: comboffset)
To use multiple symbols when running gNB, the following parameters needs
to be edited in the function get_srs_resource()
- srs_res->resourceMapping.startPosition with a range from {0,1,..,5}
corresponds to the start symbol {13, 12, .. 8} with in a slot
- srs_res->resourceMapping.nrofSymbols indicates the number of symbols
{n1, n2, and n4}
Make sure the that start symbol + number of symbols is < 14
The timing results for SRS in develop and srs_phy_simulator are as follows:
Command used: sudo ./nr_ulsim -n1000 -s50 -S50 -R273 -W2 -y2 -z2 -E 1 -P
develop
|__ RX SRS time 124.94 us (1000 trials) (124.94 total [ms])
|__ Generate SRS sequence time 0.05 us (1000 trials) ( 0.05 total [ms])
|__ Get SRS signal time 19.41 us (1000 trials) ( 19.41 total [ms])
|__ SRS channel estimation time 89.11 us (1000 trials) ( 89.11 total [ms])
|__ SRS timing advance estimation time 13.10 us (1000 trials) ( 13.10 total [ms])
|__ SRS report TLV build time 2.80 us (1000 trials) ( 2.80 total [ms])
|__ SRS beam report build time 0.00 us ( 0 trials)
|__ SRS IQ matrix build time 2.73 us (1000 trials)
srs_phy_simulator
|__ RX SRS time 211.93 us (1000 trials) (211.93 total [ms])
|__ Generate SRS sequence time 0.04 us (1000 trials) ( 0.04 total [ms])
|__ Get SRS signal time 19.55 us (1000 trials) ( 19.55 total [ms])
|__ SRS channel estimation time 152.05 us (1000 trials) (152.05 total [ms])
|__ SRS timing advance estimation time 36.67 us (1000 trials) ( 36.67 total [ms])
|__ SRS report TLV build time 2.96 us (1000 trials) ( 2.96 total [ms])
|__ SRS beam report build time 0.00 us ( 0 trials)
|__ SRS IQ matrix build time 2.88 us (1000 trials)
Note that in srs_phy_simulator, to compute timing offset ns, an
oversampling factor of 2 is performed. Also, for peak detection, we
average the channel estimates for every port.
fix array lenght errors, k variable wrapping threshold. Make the code smaller and more efficient
generate_nr_prach() has several errors coming from replace int16_t by
c16_t, and also older error in k wrapping at the end of the symbol
the code is also ridiculously complex, wasting memory and cpu time in
intermediate useless buffers and headache usage of memmove()
Make gpd config utility global
Make gpd a global utility macro for reading config/command line
parameters. Add a corresponding function with full name for clarity,
keep the short name for the macro for backward compatibility and ease of
use.
The main benefit of gpd/config_get_paramdef_from_name macro/function is
that it does not require maintaining a separate parameter index list.
Update physim timing thresholds in gNB-N300-Timing-Phytest-LDPC
The lower bound for the tests are too tight and any slight improvement
in the timing can result in a test failure. For example, these tests
were failing due to the improvements from the MR !3718
The lower bound for the tests are too tight and any slight improvement in the timing can result in a test failure.
For example, these tests were failing due to the improvements from the MR 3718
- We use the same function at gNB and UE.
- We always use nb_antennas_tx to check the max possible number of ports (which is wrong).
- At gNB, we should use nb_antennas_rx and at the UE, we should use nb_antennas_tx.
The memory alignment is required to use c16multaddVectRealComplex
in SRS channel interpolation. With a change in SRS comb_offset, the
existing algorithm was giving segmentation fault.
The existing srs channel estimation required memory alignment at two
stages. 1. When k = 0 (the first srs subcarrier), 2. When subcarrier <
K_TC (wrapped around after ofdm_symbol_size). Thus two memory alignments
are required leading to complications.
The srs channel estimation is now simplified to do it linearly instead of
wrapping around. This simplified the memory alignment required only when
k = 0.
- Introduce signal energy and noise variance functions
- Combine rotation and OFDM modulation RX as a function
- Harmonize the use of number of antennas across the code
- Rename nr_ue_pusch_common_procedures() to nr_tx_rotation_and_ofdm_mod() to decribe the functionality better
Integration: `2026.w02`
* !3828 L2 UE files code cleanup for static functions
* !3839 Couple rfsim fixes
* !3835 Correctly include cblas include directories for RHEL
* !3840 Fix missing return statements in SIB1 TDA validation
* !3836 move NTN UE L1 functions to a new file
* !3793 CI: Remove redundant Jenkinsfiles
* !3770 RRC UE: Implement proper NH chain synchronization for RRC Reestablishment
* !3843 fix(documentation): issue 1042
* !3842 Remove unused cmake_targets files
* !3832 Remove global iq_txshift and iq_rxrescale
* !3847 Minor CI and nr_ulsim reporting adjustments
* !3838 NR NGAP (N2HO) : Fix Time UE Stayed in Cell IE type and calculation
* !3677 Support prach with start symbol of PRACH not at symbol 0
Closes#1042 and #857
See merge request oai/openairinterface5g!3841
Make gpd a global utility macro for reading config/command line parameters.
Add a corresponding function with full name for clarity, keep the short name
for the macro for backward compatibility and ease of use.
The main benefit of gpd/config_get_paramdef_from_name macro/function is that
it does not require maintaining a separate parameter index list.
Support prach with start symbol of PRACH not at symbol 0
The following PRACH indice have been tested.
index / format (nf mod x = y) / Subframe/ start_symbol /no_of_slot / occ / duration
152 B4 2 1 4,9 0 2 1 12
151 B4 2 1 4,9 2 1 1 12
157 B4 1 0 4 0 1 1 12
159 B4 1 0 9 0 1 1 12
NR NGAP (N2HO) : Fix Time UE Stayed in Cell IE type and calculation
According to 3GPP TS 38.413, the 'Time UE Stayed in Cell' IE is an
integer ranging from 0 to 4095. This patch updates the data structure
to reflect the correct bit width and implements the dynamic calculation
based on the UE's residence time.
- Change time_in_cell from long to uint16_t in ngap_messages_types.h.
- Replace dummy value with real-time calculation in rrc_gNB_NGAP.c.
- Implement a ceiling of 4095 to comply with the 12-bit protocol limit.
Ref: 3GPP TS 38.413 Section 9.3.1.97
Refactor key derivation logic to properly handle Next Hop (NH) chain
synchronization according to 3GPP TS 33.501 specifications for both RRC
Reestablishment and Master Key Update procedures.
Changes in rrc_gNB.c:
- Clarify key derivation in rrc_gNB_generate_RRCReestablishment by explicitly
selecting base key (NH or KgNB) based on nh_ncc value
- Add comment explaining vertical vs horizontal derivation logic
Changes in rrc_UE.c:
Refactored the NH chain synchronization and key derivation code to match
TS 33.501 terminology:
- nr_sync_nh_chain(): Common helper to synchronize NH parameter chain per
TS 33.501 Annex A.10, supporting both Master Key Update and RRC Reestablishment
procedures
- nr_derive_kgnb_horizontal(): Derive KNG-RAN* from current KgNB when NCC values
match (horizontal derivation per TS 33.501 A.11/A.12)
- nr_derive_kgnb_vertical(): Derive KNG-RAN* from synchronized NH after NH chain
sync (vertical derivation per TS 33.501 A.11/A.12)
- nr_update_kgnb_from_ncc(): Unified function implementing TS 33.501 6.9.2.3.4
logic for updating KgNB based on received nextHopChainingCount
- Refactor as_security_key_update(): Use new nr_update_kgnb_from_ncc() helper
function for cleaner, more maintainable code
- Fix nr_rrc_ue_process_rrcReestablishment(): Properly handle received
nextHopChainingCount and update KgNB using unified helper function
- Replaced the previous nr_rrc_nh_update() helper with these functions to
improve clarity and alignment with the specification.
- Add debug logging for key derivation process
Key NAS deriver utils:
- update derive_kgnb documentation and protect input keys with const attribute
Closes#857
Robert Schmidt