Remove Ubuntu 20 and RHEL/Rocky 8 support, increase cmake min version
Ubuntu 20 is EOL [1]. This was the version with the lowest CMake version, so
we can increment the minimum CMake version to 3.19 as well. Increasing the
minimum version will in particular help with the integration of CUDA (updates
in 3.17 and 3.18), the current 3.19 brings better support for apple silicon.
Some minor CMake updates (removing superfluous files and dependencies).
[1] https://ubuntu.com/blog/ubuntu-20-04-lts-end-of-life-standard-support-is-coming-to-an-end-heres-how-to-prepare
UE: Fix if target cell during handover has SSB at a different offset as in source cell
These changes fixed these observed issues:
- If target cell has a different SSB position compared to source cell during
ho - sync was not successful.
- RAR does not get decoded if SSB position has changed on the target cell
compared to source cell.
without this fix, after sync is successful, RAR is not getting decoded.
PDCCH area also changes as SSB offset can change. if MAC configuration changes.
Actual problem is that SYNC does not happen on the target cell as frame parameters is not updated
and ssb start carrier is not correct in the UE frame parameters
function nr_get_ssb_start_sc to determine ssb_start_subcarrier
Ubuntu 20 is EOL [1] unless people pay for support. Therefore, remove it
from build_helper. People can still use it, but might need to install a
more recent cmake version (which the next commit will upgrade). The rest
should be the same.
[1] https://ubuntu.com/about/release-cycle
Integration `2026.w09`
* !3944 Fail early if configuration module can not initialize properly
* !3945 gNB: Reset NDI only after usage in case of disable HARQ
* !3822 NR UE: fix PRACH k1 calculation at MAC when handover
* !3874 print better message for rsrp: invalid doesn't mean it is not measures, it...
* !3928 NR UE: correctly compute writeTimestamp for SCS > 30 kHz with rf-simulator
* !3949 fix: removed the nssai_sd parameter in the ue.conf file
* !3897 Change Aerial config file in targets to match Nvidia's CI setup
* !3951 Fix handling of IPv4v6 PDU sessions
* !3940 IPV6 support for telnet socket binding
* !3947 Add missing packing for CONFIG.request parameter BetaPSS
* !3871 Support for up to 12 ports in NR gNB
* !3943 Remove L1 dependence from NR band number
* !3892 Synchronize multiple gNBs by aliging their the slot boundaries
* !3952 Fixes for Initial UE Context Setup
* !3953 Improvements in compilation dependence
* change dl_absoluteFrequencyPointA in targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.24PRB.usrpb210.conf to 640032
* !3900 [CI] Pull Ubuntu base image from internal registry
* !3910 GPU Channel Simulation: nr_dlsim/nr_ulsim Integration + CI Test
* !3942 CI: rework log analysis to simplify and allow new use cases
* !3870 Configure CSI-RS according to beam_id used by UE
Closes#897 and #834
See merge request oai/openairinterface5g!3950
Configure CSI-RS according to beam_id used by UE
This MR is to configure CSI-RS according to beam_id used by UE and
reconfigure upon beam change.
It has been tested with RFSIM, Liteon and Microamp under multiple beams.
CI: rework log analysis to simplify and allow new use cases
The CI has some log analysis, but it is unmaintainable (huge functions
that mix eNB/gNB or lteUE/nrUE, are not tested, most of it is not used
or useful...) or limited to specific use cases (the timing-phytest time
analysis is hardcoded to source builds instead of also handling analysis
when running from docker images). This MR reimplements both functions.
For the log analysis, the CI team decided to throw away the old
analysis, and reimplement a mechanism that checks the couple of things
we care for.
- Allow to analyze phy-test timing analysis from docker files, and add a
unit test
- Rework existing log analysis to remove useless checks, and make it
more composable
* The undeployment steps (Undeploy_Object(), Terminate_eNB()) take an
<analysis> XML object which then either has a <services> subelement
with check that are whitespace delimited (similar to how other xml
task steps have <services>). For checks that contain whitespace,
they can use <service> (singular) that encodes a single check, such
that e.g., arguments could include spaces.
* Each check is of form service=check[=arguments], where service is
the docker services, check is a checking function (implemented as a
class with run(file, options) function inside cls_loganalysis.py,
and options arguments after the second = that is to be read by run()
(basically, options will contain arguments that can be freeform)
* these definitions can occur multiple times, e.g., it could be
serviceA=Check1 and serviceA=Check2=Args and it will execute both
Check1 and Check2
* if a service is declared, it will execute alse the Default check
which currently checks for an assertion
* Implemented (and inspired from the existing CI analysis) are:
- Default check to check for assertions (will be extended, to e.g.,
address/undefined behavior sanitizer analysis)
- RetxCheck: retransmission check as used in the CI
- LastLineContains to check the last line containes a specific
string
- ContainsString to check a specific string appears in logs
- EndsWithBye: check that towards the end (but not necessarily the
last line), there is a Bye. string (a workaround since we don't
always terminate with 0)
- There is a plan to use return codes after stopping in docker, but most
executables do not end with 0 most of the time, such that we needed to
abandon this plan.
- Additional fixes (see commit messages) and delete unused code
GPU Channel Simulation: nr_dlsim/nr_ulsim Integration + CI Test
This MR is a follow-up to !3886 (merged) and extends CUDA-based channel
simulation support to nr_dlsim and nr_ulsim, together with the
corresponding CI tests.
The MR incorporates:
- Cherry-picked commits e0c204f7 and 5f344876 from !3588
- Integration of new CI physim tests using GPU-accelerated channel
simulation in nr_dlsim and nr_ulsim tests, see commit c727b3bb
New CI job: RAN-Channel-Simulation
https://jenkins-oai.eurecom.fr/job/RAN-Channel-Simulation/
[CI] Pull Ubuntu base image from internal registry
This MR updates the Docker build process for OAI images to use a private
registry for the Ubuntu base image ubuntu:noble. This will reduce the
possibility for CI disruption if no internet connection exists.
- Replace FROM ubuntu:noble with FROM <DEFAULT_REGISTRY>/ubuntu:noble in Ubuntu Dockerfiles
This change overcomes the pull rate limit issues from DockerHub in the
CI.
The <DEFAULT_REGISTRY> contains a multi-architecture image (arm64 and
amd64)
$ docker buildx imagetools inspect gracehopper3-oai.sboai.cs.eurecom.fr/ubuntu:noble | grep Platform
Platform: linux/amd64
Platform: linux/arm64
- The scripts run from the jenkins server everyday using a crontab.
- It pulls the AMD and ARM ubuntu:noble image on respective servers and
checks if the internal registry is in sync.
- If not, it pushes the ubuntu:noble image to the registry to remain in
sync with dockerhub.
It was initially foreseen to just check the program exit code, but most
executables don't return with 0 (so the CI would always fail). Add a
separate check that will check for the Bye., only going through the last
X lines instead of the entire file.
- we agreed to basically throw away the old log checker (as it is
unmaintainable)
- now: provide list of analysis to do
* all checkers in cls_log_analysis, can be unit tested (see also next
commit)
* looked up dynamically to simplify adding of new tests + config
* configured with
<analysis>
<services>DESCRIPTION [DESCRIPTION...]</services>
<service>DESCRIPTION</service>
...
</analysis>
where DESCRIPTION follows service=func[=options]:
- service is name of service to check
- func is function to call, which receives filename
- option are arbitary options to pass to func
<services> is whitespace delimited (so can take multiple service
analysis definitions)
<service> exists to allow service definitions with whitespace
changes that would not work in <services>
- I initially planned to check return code, but most softmodems actually
exit with non-zero return code, so this is still TODO
- Default analyzer (checking for assertions, ...) is always run if a
service is listed
- checks for file size
- add unit tests
- it is spaghetti code: difficult to understand which code paths are
taken
- the only effect seems to be in the UE log analysis function: it might
make the log fail. However, we test that iperf is successful
(Iperf2_Unidir()), and would detect before the log analysis if MBMS
traffic does not work
- the rest is only messages that likely nobody reads
The real reason for this change is to reduce the number of class members
in the ran.py class, to simplify the functioning of the eNB analysis
function (no self) to reduce dependencies on the ran.py class.
set -e makes the script exit on error. However, there is code to handle
a non-zero return code of the script, and -e prevents from writing the
footer.
add set -x to see all the commands that are being executed.
Use a raw string as suggested:
ci-scripts/cls_static_code_analysis.py:93: SyntaxWarning: invalid escape sequence '\:'
result = re.search('([a-zA-Z0-9\:\-\.\/])+\.git', self.ranRepository)
ci-scripts/cls_static_code_analysis.py:125: SyntaxWarning: invalid escape sequence '\.'
ret = re.search('cppcheck version="(?P<version>[0-9\.]+)"', str(line))
ci-scripts/cls_oai_html.py:221: SyntaxWarning: invalid escape sequence '\/'
cmd = "sed -i -e 's/__STATE_" + self.htmlTabNames[0] + "__/<span class=\"glyphicon glyphicon-remove\"><\/span>/' test_results.html"
ci-scripts/ran.py:428: SyntaxWarning: "\[" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\["? A raw string is also an option.
result = re.search('\[gNB [0-9]+\]\[RAPROC\] PUSCH with TC_RNTI 0x[0-9a-fA-F]+ received correctly, adding UE MAC Context RNTI 0x[0-9a-fA-F]+', str(line))
ci-scripts/ran.py:457: SyntaxWarning: "\[" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\["? A raw string is also an option.
result = re.search('\[PHY\]\s+problem receiving samples', str(line))
ci-scripts/ran.py:461: SyntaxWarning: "\[" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\["? A raw string is also an option.
result = re.search('\[MAC\]\s+Removing UE', str(line))
I am not sure we ever need the millisecond output. The date is typically
also clear from the output (we could print the date at the beginning,
once, instead, but this is not done here. Finally, in Jenkins, we
typically get time stamps. Thus, it's not necessary to print this by
default.
On the other hand, since it might be useful when running locally, make
time stamps in logs configurable.
Fix compilation error:
/oai-ran/openair1/SIMULATION/NR_PHY/dlsim.c:932:42: error: variable 'h_channel_coeffs' set but not used [-Werror,-Wunused-but-set-variable]
932 | float *h_channel_coeffs = NULL;
| ^
- Introduce usage of the -f option in ulsim to allow enabling specific
feature flags at runtime.
- Add support for the "cuda" flag to enable CUDA channel simulation when
compiled with CUDA support. If an unsupported flag is provided, nr_ulsim
reports an error.
This commit integrates the GPU-based channel simulation pipeline into
the ulsim.
A `--cuda` command-line flag is added to enable the GPU path at
runtime. When activated, the simulator will:
- Allocate all necessary GPU and pinned host memory via the
`init_cuda_chsim_buffers` helper function.
- In the main simulation loop, call the `run_channel_pipeline_cuda`
function to perform the channel simulation on the GPU, bypassing the
CPU-based functions.
- Clean up all CUDA resources on exit using the
`free_cuda_chsim_buffers` helper.
The cpu path is also updated to use multipath_channel_float and add_noise_float.
Jaroslava Fiedlerova