The aggregation level search order for PDCCH candidates is modified:
- the search starts from desired_agg_level_index, which is a value from 0 to 4
proportial to pdcch_cl_adjust.
- pdcch_cl_adjust is a value between 0 and 1 that indicates PDCCH channel quality
by averaging HARQ DTX rate. A value of 0 means perfect channel, a value o 1 means
impaired channel.
RSSI threshold for PUSCH & PUCCH power control
To prevent ADC railing or "clipping" when the received power is too
large, introduce RSSI threshold parameters for PUSCH and PUCCH, which
are now configured in units of 0.1 dB. Here is how you can configure and
use these thresholds:
1. Configuration:
- Set the pusch_RSSI_Threshold and pucch_RSSI_Threshold parameters in
your configuration file (e.g., gnb.conf) (MACRLC section).
- These parameters define the maximum acceptable RSSI values for
PUSCH and PUCCH, respectively. The unit is either dBm or dBFS,
depending on the RSSI reporting configuration.
2. Usage:
- The nr_limit_tpc function will automatically adjust the Transmit
Power Control (TPC) commands based on the configured RSSI
thresholds.
- If the RSSI exceeds the threshold, the TPC command will be limited
to prevent further increase in power, thereby avoiding ADC
clipping.
- Introduced new configuration parameters `pusch_RSSI_Threshold` and `pucch_RSSI_Threshold`
(MACRLC section)
- Added `nr_limit_tpc` function in `gNB_scheduler_primitives.c` to limit TPC based on RSSI
threshold.
- Integrated `nr_limit_tpc` in PUCCH and PUSCH power control
Example Configuration
puxch_RSSI_Threshold takes value between -1280 and 0 and is mapped to range -128.0 dBm/dBFS
to 0.0 dBm/dBFS in 0.1 dB increments. Unit depends on RSSI reporting config.
pucch_RSSI_Threshold = -500; # Set the PUSCH RSSI threshold to -50.0dBm/-50dBFS
pucch_RSSI_Threshold = -600; # Set the PUCCH RSSI threshold to -60.0dBm/-60dBFS
Robert Schmidt