Add a flag for each RB that tracks suspension state. Mark all RBs
(except SRB1) as suspended on reestablishment, and de-suspend on
reconfiguration. Only check RLC status for non-suspended RBs. For UL
data traffic, check that DRB/SRB2 exist (SRB1 should be there as soon as
the UE context exists).
- rewrite add_UE_to_list() and rewrite remove_UE_from_list() to simplify
list handling
- return pointer from get_new_nr_ue_inst(); it's completely freed by
delete_nr_ue_data()
- have add_new_UE_RA() add UE context to access list; remove with
nr_release_ra_UE()
- have add_connected_nr_ue() only add UE to connected list; to move from
access to connected use transition_ra_connected_nr_ue(); remove with
mac_remove_nr_ue() as previously
- free memory on problems during RA
- add some documentation
- in NSA/HO: check for pre-configured RA process
- there are asserts in all functions to clarify when a UE has RA
The aggregation level search order for PDCCH candidates is modified:
- the search starts from desired_agg_level_index, which is a value from 0 to 4
proportial to pdcch_cl_adjust.
- pdcch_cl_adjust is a value between 0 and 1 that indicates PDCCH channel quality
by averaging HARQ DTX rate. A value of 0 means perfect channel, a value o 1 means
impaired channel.
* Remove the ulsch_slot_bitmap and dlsch_slot_bitmap from nrmac
* Adopt the new is_dl_slot/is_ul_slot functions in the stack
to replace is_xlsch_in_slot: these functions are getting
the DL and UL slots as they are set in the TDD configuration
stored in tdd_slot_bitmap (frame_structure_t)
* Keep is_xlsch_in_slot in openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_phytest.c:
this is necessary because the phy-test pre-processors are using the bitmaps
dlsch_slot_bitmap and ulsch_slot_bitmap to check which DL/UL slots to use
for transmission among those set in the TDD configuration
Co-authored-by: Guido Casati <guido.casati@firecell.io>
Prior to this this commit, the structure NR_UE_info_t is 4881632 bytes.
On some machines, e.g., one of the CI systems, this can lead to realtime
problems when doing the initial calloc() of the data structure.
Commit e586efb29d ("Enable 32 HARQ
Processes in DL, UL") introduced the real-time problems by increasing
the number of HARQ processes.
The reason NR_UE_info_t is that big is that it contains buffers for DL
HARQ data that might need to be retransmitted (the L1 is stateless, it
cannot store this for the L2). To reduce the size, dynamically allocate
the DL HARQ buffers when they are needed. This also reduces the size of
NR_UE_info_t to 15840 bytes.
Encapsulate transportBlock in byte_array and accessory functions, and
allocate in big chunks of multiple of ~32kB.
Reported-By: Cedric Roux <cedric.roux@eurecom.fr>
Fixes: e586efb29dCloses: #875
When the UE list is full, the iterator will run through all
MAX_MOBILES_PER_GNB UEs. It expects that eventually the pointer is NULL,
which is not the case if we have MAX_MOBILES_PER_GNB (or it simply
depends on the following memory). So give one array entry more, to
ensure that the last one is NULL.
This MR removes limitations on BWP scheduler operation for which only
the information from the first UE of the list was taken into account. To
do so, I moved the VRB map check for DL and UL scheduler out of the
preprocessor and in the scheduler itself.
Closes: #769
Refactor the RRC processing timer to be a generic "transmission
interrupt" timer, and use NR_timer_t for it. Also,
depending on the kind of RRC processing (see 38.331 table 12.1-1),
timing requirements might be different. However, the DU does not always
know which RRC processing is ongoing, and does not get this information
via F1. Hence, introduce a "worst case" delay time, which aligns with
the spec (it says these times are "minima") and is accepted by COTS UE.
The gNB MAC might need to stop transmission either for some time (RRC
processing), or continuously (transmission stop requested by CU). Those
can be handled in one common timer implementation. The continuous case
will be used in a follow-up commit.
Co-authored-by: Luis Pereira <lpereira@allbesmart.pt>
- Enabled configuration for number of dl, ul harq processes in conf file
- set "num_dlharq = 32; num_ulharq = 32;" under "gNBs" section in the conf file
- default values when not configured is 16 for DL, UL harq processes
- IEs in the RRC messages set according to the number of DL, UL harq processes configured.
- If value 32 is configured , then IEs related to num harq processes and dci bits also configured in Bandwidth parts.
The RTT for GEO satellites is more than 500 ms.
And as the TA update interval must be greater than the RTT, we increase it to 1 second instead of 100 ms.
Should also do no harm for terrestrial networks.
maki
Robert Schmidt