CI: Increase tested UL throughput on Aerial pipeline using 2L UL
The goal of this MR is to activate the use of 2-layer uplink by enabling SRS
and to increase the tested UL throughput in CI.
Collection of small fixes
A few fixes needed while testing FHI libraries
- set subcarrier spacing in PUSCH PDU in NRUE
- a set of two LOG_Ds that prints out the PUSCH allocation on gNB & UE
[NGAP] Fix incorrect AMF Set ID type (uint8 → uint16) causing AMF lookup failure
This PR fixes issue #1012 , a data type issue related to the AMF Set ID used
during UE RRC reestablishment. The AMF Set ID was mistakenly declared as uint8_t
instead of uint16_t, even though it is a 10-bit field as specified in 3GPP TS
23.003 section 2.10.1. As a result, AMF Set IDs greater than 255 were truncated,
leading to failed AMF lookups and the following warning: No matching AMF found
for PLMN (MCC=%03d MNC=%0*d) and AMF SetID=%u.
Verified reestablishment succeeds with AMF Set IDs >255.
gNB: fix MAC TA command scheduling if measurement gaps are configured
In the current implementation, if UE transmission is interrupted via
nr_mac_interrupt_ue_transmission(), UE_sched_ctrl.ta_frame is modified to be
the previous frame avoiding TA scheduling in the measurement gap. So the next
scheduled TA is shifted to be in 99 frames. As there are other measurement gaps
before that, the scheduled TA is always shifted, but actually never reached,
effectively disabling the MAC TA commands.
To fix this, UE_sched_ctrl.ta_frame is changed to not indicate the last TA
command transmission, but the next one. This allows to check in
nr_mac_interrupt_ue_transmission() if the next TA command transmission is within
the measurement gap and if so shift it to just after that gap.
DCI 00 alt size fix
DCI size for format 00 and 10 should be equal so we need to compute the size of
the alternative format when computing the size of DCIX0. There was a bug where
the alt_size input (0 in that case) was taken into account also when computing
that alternative size, resulting in an alt_size of 0. Possibly easier to
understand by looking at the code then reading this description.
SDAP: guard RX header parsing with enable_sdap and init per-entity
!3519 (merged) refactored the SDAP to use the QFI from the header rather than
pass it to the rx function and got rid of the initialization of QFI to -1.
However, entity roles are stored into the drb2qfi table, and the indexing
implies that the QFI is known.
While in TX it is not an issue since packets are forwarded based on the QFI,
in RX the QFI can only be parsed from the header, therefore if headers are
disabled (--enable_sdap) the QFI is not there and it is wrong to access the
header (buf[0]) and looking for it.
This commit adds enable_sdap to nr_sdap_entity_t and initialize it in
nr_sdap_add_entity() from sdap->role (disabled when NO_SDAP_HEADER).
In nr_sdap_rx_entity(), only parse buf[0] for QFI and derive sdap_ul_rx/
sdap_dl_rx when enable_sdap is true; otherwise, keep offset=0 and forward
payload unchanged.
NTN: Fixing variable ULDLduplex issue for NTN bands
- Duplex is assumed to be static but for NTN bands (and also for some non NTN
bands), it is not static.
- Tx-RX Duplex is defined in section 5.4.4 of 38.101-5 (for NTN) specs v1809
- For example: In NTN-OTA testing, the GEO satellite operator configured in
band 256 the DL, UL frequencies with duplex of 185Mhz.
In the current implementation, if UE transmission is interrupted via nr_mac_interrupt_ue_transmission(),
UE_sched_ctrl.ta_frame is modified to be the previous frame avoiding TA scheduling in the measurement gap.
So the next scheduled TA is shifted to be in 99 frames. As there are other measurement gaps before that,
the scheduled TA is always shifted, but actually never reached, effectively disabling the MAC TA commands.
To fix this, UE_sched_ctrl.ta_frame is changed to not indicate the last TA command transmission, but the
next one. This allows to check in nr_mac_interrupt_ue_transmission() if the next TA command transmission
is within the measurement gap and if so shift it to just after that gap.
!3519 refactored the SDAP to use the QFI from the header rather
than pass it to the rx function and got rid of the initialization
of QFI to -1.
However, entity roles are stored into the drb2qfi table, and the
indexing implies that the QFI is known. While in TX it is not an
issue since packets are forwarded based on the QFI, in RX the QFI
can only be parsed from the heaedr, therefore if headers are
disabled (--enable_sdap) the QFI is not there and it is wrong to
access the header (`buf[0]`) and looking for it.
This commit adds `enable_sdap` to `nr_sdap_entity_t` and initialize
it in `nr_sdap_add_entity()` from `sdap->role`
(disabled when `NO_SDAP_HEADER`). In `nr_sdap_rx_entity()`, only
parse `buf[0]` for QFI and derive `sdap_ul_rx`/`sdap_dl_rx` when
`enable_sdap` is true; otherwise, keep `offset=0` and forward
payload unchanged.
Integration `2025.w45`
* !3736 fix bugs in scope for pdcch, and optimize cpu cost of pdcch decoding
* !3743 NR UE: fix PDCCH LLR indexing for different search space RB sizes
* !3739 Bugfix: save old tunnel info to remain the user plane connection while rolling back to source DU due to handover failure
* !3742 Simplify node management in CI, handle SIGINT
* !3670 PRS bug fix and CI Integration
* !3746 Fix unsigned to signed decoding parameters to allow for 'no affinity'/'no pin' threads to CPUs
* !3738 CI: Add new Jenkinsfiles
Closes#984 and #1021
See merge request oai/openairinterface5g!3744
CI: Add unified Jenkinsfile for all test pipelines
This MR introduces a single Jenkinsfile to cover all current CI test pipelines
Improvements:
- correct reporting of the start timestamp in the HTML report
- harmonize log collection - always collect as test_logs_${env.BUILD_ID}.zip
Fix unsigned to signed decoding parameters to allow for 'no affinity'/'no pin'
threads to CPUs
By default, 'L1_rx_thread_core', 'L1_tx_thread_core', 'ru_thread_core' are set
to '-1' but the values were decoded from config file as unsigned instead of
signed types, thus, it was not allowing to set them with '-1' from config file.
PRS bug fix and CI Integration
- Fix the bug in PRS channel estimation while copying memory to compute the
impulse response
- Integrate PRS testing to CI
Simplify node management in CI, handle SIGINT
- Make a single <node> XML step entry common to all XML steps to harmonize code
- Handle SIGINT to make it possible to more easily stop the CI script.
Bugfix: save old tunnel info to remain the user plane connection while rolling
back to source DU due to handover failure
This MR closes issue #984 that UE lost the data plane connection while rolling
back to the source DU due to handover failure.
NR UE: fix PDCCH LLR indexing for different search space RB sizes
After !3603 (merged), when multiple search spaces have different CORESET
configurations (different number of RBs), the LLR buffer stride must be
calculated based on the maximum RB size across all search spaces, not the
current search space's RB size.
The LLR buffer is allocated with size based on get_pdcch_max_rbs(), but the
demapping function was using coreset_nbr_rb (current search space) for symbol
stride calculation, causing incorrect LLR extraction when search spaces have
different RB configurations.
This MR tries to fix it.
Closes#1021
Set the subcarrier_spacing field in nfapi_nr_ue_pusch_pdu_t from MAC
to PHY. This has no consequence for the NR UE Softmodem operation as this
field is never read, but prevents a potential future bug in case L1 was
modified to read it.
By default, 'L1_rx_thread_core', 'L1_tx_thread_core', 'ru_thread_core' are set to '-1' but the values were decoded from config file as unsigned instead of signed types, thus, it was not allowing to set them with '-1' from config file
This commit inputs several distances at once and obtain the summary of
successful and failed tests. We look for the number of successful tests
that are geater than 0. We do that here since we sometimes dont receive
a response for a telnet command from the rfsim although the command
is applied. This is related to the queing telnet commands in the rfsim.
The script for the distances 50, 100 and 150 are called as follows,
./set-and-verify-distance-prs.sh 50 100 150
The summary can be viewed as follows,
==================== SUMMARY ====================
Total tests run : 3
Successful tests: 3
Failed tests : 0
=================================================
Set RFsim (DL) distance and use PRS to estimate the new distance. This
is verified by comparing the distance set in RFsim with the distance
reported through ToA estimation at the UE.
Note that since RFsim telnet output is asynchronous (it uses a queue
internally), we use grep --max-count 1 to wait for the matching line,
together with ncat --idle 0.3 to keep ncat open for some time. The
--max-count option will terminate grep after the first occurrence. For
this to work reliably, we need to use grep <(echo | ncat) as opposod to
simply echo | ncat | grep, as the latter does not seem to reliably
make grep exit after the occurrence.
Co-authored-by: Robert Schmidt <robert.schmidt@openairinterface.org>
fix bugs in scope for pdcch, and optimize cpu cost of pdcch decoding
fix bugs in scope for pdcch, and optimize cpu cost of pdcch decoding by not
processing useless samples in one symbol
When multiple search spaces have different CORESET configurations
(different number of RBs), the LLR buffer stride must be calculated
based on the maximum RB size across all search spaces, not the
current search space's RB size.
The LLR buffer is allocated with size based on get_pdcch_max_rbs(),
but the demapping function was using coreset_nbr_rb (current search
space) for symbol stride calculation, causing incorrect LLR extraction
when search spaces have different RB configurations.
Handle SIGINT and mark any subsequent steps as failed. Receiving SIGINT
a second time will abort the script immediately (as is the case before
this commit).
Note that Python seems to relay the signal to the "controlled" process
(e.g., Ping), which would return immediately with an error. So some
steps like Ping will abort immediately, others (e.g., IdleSleep) will
finish their step, and then the present logic will mark subsequent steps
as failed.
Some CI tasks/commands like Iperf(), Ping() get multiple nodes (via XML
parameter "nodes") to potentially run UEs on different nodes (hosts) at
the same time. However, I argue that this is not good:
- we don't actually use this -- where we specify multiple UEs, it's
always "localhost localhost..."
- it is inconsistent, as we typically have a single "node", not nodes,
and there is a possibility to harmonize (see also next commit)
- if we needed it, there would be better ways to achieve the same.
First, for hardware-based UEs, the ci_infra.yaml can specify different
UEs. For simulated UEs, it would be feasible to have multiple XML
steps run in parallel, e.g., in the XML <parallel> tag, which would
clarify that multiple UEs on different hosts run in parallel
- it reduces code.
Hence, make a single <node> for these XML steps.
Created Jenkinsfiles:
- Jenkinsfile: for stadard test pipelines
- Jenkinsfile-oc: for deployments with OC
These 2 Jenkinsfiles covers all current test pipelines.
Previously, we were using int16_t for the variable ch_tmp which was later harmonized to use c16_t while leaving <<1. This introduced the bug while accessing the address of the element at first_half of the ch_tmp variable.
Integration `2025.w44`
* !3721 improvements in formatting and LOGs in DMRS common functions at MAC
* !3725 Handle GTP receiver errors, fix memory leaks, add CU-UP test
* !3726 fix for CSI payload sizes in PUCCH structure at UE
* CI: Adjust attenutation for HO setup
* !3728 Fix for scenario with no CSI report configured for CSI-RS
* !3731 CI: ensure clean iperf3 server startup
* !3592 Refactor PRACH handling at the gNB
* !3682 Refactor DLSCH scheduler
* !3733 Clarify whitespace
* !3706 Change registry name env var content
Closes#1015 and #1014
See merge request oai/openairinterface5g!3727
Change registry name env var content
Currently setting REGISTRY="" in a .env file results in docker failing to find
/image-name:tag. This corrects that, so it looks for local images named
image-name:tag.
Jaroslava Fiedlerova