This commit fixes issues introduced by the previous commit.
Summary of work:
- cleanup:
- fix LOG_XX to be less verbose
- fix cmake_targets/CMakeLists.txt
- fix oaienv
- remove dead code
- bug fixes:
- in openair1/SCHED/fapi_l1.c we had:
eNB->pdcch_vars[subframe&1].num_dci = number_dci;
should be:
eNB->pdcch_vars[subframe&1].num_dci = 0;
This bug let the PHY send more DCIs than what should have been
sent because num_dci is incremented later on in the code.
This fix may be a problem for fapi mode, to be checked.
- add new T VCD traces
- revert openair1/PHY/TOOLS/file_output.c to 'develop' version
- remove thread_id in logRecord/logRecord_mt
- revert (and adapt) configuration files
- be careful when doing frame++, we need to % 1024
- revert target_rx_power in openair2/LAYER2/MAC/eNB_scheduler_ulsch.c
- NFAPI:
- the open-nFAPI code has been included in the repository. See nfapi/README.
Maybe we should "git clone" the Cisco repository instead. We have to be
careful of availability though.
What has been tested:
- monolithic eNB FDD 5/10MHz with one UE, iperf UDP/TCP uplink/downlink
Anything else may fail to work, especially the FAPI mode, which has not
been tested at all.
It has been chosen to not include the full history of commits
from David. He included a binary version of wireshark, probably
a modified one that understands NFAPI. Wireshark is released under
the GPL license, we cannot include it in the repository. We could
have done a next commit to remove this binary. But then it would
still be present in the history of commits, which may not be allowed.
And it would take space on disk. We could edit the history to remove
wireshark entirely. But this operation is too complicated.
There was also a pcap capture file, which has nothing to do in
the history of commits and would take space on disk. There again,
it's too difficult to edit the history to remove it.
There was a file .gitignore that was also removed.
The original history can be found on David's repository:
https://gitlab.eurecom.fr/daveprice/openairinterface5g/
The branch is: nfapi-ru-rau-split.
A copy of that branch has been included in the internal OAI
repository, for those who have access to it.
The branch is the same. The last commit ID is
9106438239e0bc626ff1fa1d97d911caadd0fbb9.
You can compare the current commit with the commit 9106...
to see what differs.
The current commit has to be considered non-working.
The commit following the current commit will fix problems with
the work in the current commit.
If you use git bisect, don't spend time analyzing the current
commit.
How to use:
1 - compilation of softmodem:
./build_oai --eNB -t ETHERNET
2 - compilation of mobipass driver:
cd cmake_targets/lte_build_oai/build
make oai_mobipass
ln -sf liboai_mobipass.so liboai_transpro.so
3 - configuration:
edit the configuration file, set "node_timing" to
"synch_to_mobipass_standalone"
that is, have the line:
node_timing = "synch_to_mobipass_standalone";
4 - run:
run as usual: sudo ./lte-softmodem -C <configuration file>
Several problems are present.
The first is that _write returns 0 instead of the
number of samples. We solve it by returning
nsamps.
The second is that _read may return less samples at
the beginning and we don't want to exit for that.
We solve it also by returning nsamps.
(We still need to log more in this, to be done in the
next commit.)
The third is that after initialization we don't send
anything for a while, time for the softmodem to finish
its init. This generates lots of "RX overrun".
We solve it by disabling TX and RX modules after init
and then in trx_brf_start we activate them again (and
also call bladerf_sync_config, which seems to be
mandatory, and bladerf_calibrate_dc, which may be avoided,
perhaps).
Maybe not the end of the story. Sometimes it works, UE connects,
traffic is fine (tested only with 5MHz). Sometimes it does not,
UE does not connect, or it connects but then traffic is bad,
especially uplink.
To be refined.
We have a strange problem with the timestamp of the very
first packets received from the LimeSDR that leads to
a complete failure of the eNB.
A simple workaround is to discard the first RX packet
just after a "start" of the device.
We also change the value of "tx_sample_advance" to a more
reasonable value. The problem of timestamp was "solved"
differently in the past and at the time we needed to put
a much higher value.
This may have to be refined at some point.
hongzhi wang