Bugfix in ue pusch mac pdu creation
When more than one sdu with equal priority is present, there could be
buffer left after serving the lcids and also not enough to equally serve
all lcids. This commit checks for this condition. Before this fix the ue
would send malformed mac pdus when serving multiple lcids.
See getopt(3): returns int, so store it in an int variable.
I went through all occurrences, project-wide. All return values of
getopt() should be stored in ints now.
process registration reject in UE
when the 5GC rejects the ue, the message was not processed (information
element not declared)
this MR process it to print it and stop the UE
a more complete code should be done when the UE will be able to select
another cells than the most powerful PBCH, but it require larger
enhancement
CI: Update RAN-gNB-N300-Timing-Phytest-LDPC test cases
- update enc/decoder tests in RAN-gNB-N300-Timing-Phytest-LDPC - test
only for given SNR value (check of the test results to be added in the
following MR)
- add cores to Tpool in the nr_dlsim test cases, currently we test with
only one core
- always execute all the nr_ulsim/nr_dlsim tests, even if one of them
fails
- add new nr_dlsim test cases - test with 4 antennas, 2 layers
Refactor file descriptor handling in rfsimulator
- add hashtable iterator to hashtable.c
- use hashtable for file descriptor to buffer_t mapping in rfsimulator
This enables the use of file descriptors above 250. The linux file
descriptors can reach the value of FD_SETSIZE which could be e.g. 1024.
This is not an issue in most cases but if the UE or gNB process opens a
lot of file descriptors for other purposes we might see rfsimulator file
descriptors reach > 250 and cause a segfault.
Also added tests for new hashtable functions.
Instead of hardcoding to 0, instruct the GTP module to send N3 GTP
packets with the right GTP.
We currently only support one QoS Flow, so check that it is really only
one.
When more than one sdu with equal priority is present, there could be
buffer left after serving the lcids and also not enough for equaly
serving all lcids. This commit checks for this condition. Before this
fix the ue would send malformed mac pdus when serving multiple lcids.
CI: remove unused code, clean up imports
* Remove pyshark, matplotlib imports, as they are not used
* Remove stats_monitor.py, as the CI does not use it
* Clean up many warnings shown by pyflakes regarding includes that we don't use
pyflakes warns about various errors, addressed here. For cls_cluster.py,
remove (unknown) sys.exit and replace through Exception, as sys.exit()
has the unwanted effect that the CI script would stop. Instead, raise
an Exception that would show the problem in the HTML, and ensures that
the script runs until the end.
These are the warnings flagged by pyflakes.
cls_cluster.py:297:4: undefined name 'sys'
cls_containerize.py:39:1: 'subprocess' imported but unused
cls_containerize.py:41:1: 'threading' imported but unused
cls_containerize.py:43:1: 'multiprocessing.Process' imported but unused
cls_containerize.py:43:1: 'multiprocessing.Lock' imported but unused
cls_containerize.py:43:1: 'multiprocessing.SimpleQueue' imported but unused
cls_containerize.py:49:1: 'cls_cluster as OC' imported but unused
cls_containerize.py:50:1: redefinition of unused 'cls_cmd' from line 42
cls_module.py:28:1: 'os' imported but unused
cls_module.py:29:1: 'sys' imported but unused
cls_module.py:34:1: 'subprocess' imported but unused
cls_module.py:35:1: 'datetime.datetime' imported but unused
cls_module.py:211:11: undefined name 'sshconnection'
cls_oaicitest.py:37:1: 'pexpect' imported but unused
cls_oaicitest.py:47:1: 'cls_cluster as OC' imported but unused
cls_oaicitest.py:54:1: 'matplotlib.pyplot as plt' imported but unused
cls_oaicitest.py:55:1: 'numpy as np' imported but unused
cls_oai_html.py:34:1: 'sys' imported but unused
cls_oai_html.py:41:1: 'multiprocessing.Process' imported but unused
cls_oai_html.py:41:1: 'multiprocessing.Lock' imported but unused
cls_oai_html.py:41:1: 'multiprocessing.SimpleQueue' imported but unused
cls_physim.py:37:1: 'multiprocessing.SimpleQueue' imported but unused
cls_static_code_analysis.py:39:1: 'time' imported but unused
cls_static_code_analysis.py:40:1: 'multiprocessing.Process' imported but unused
cls_static_code_analysis.py:40:1: 'multiprocessing.Lock' imported but unused
cls_static_code_analysis.py:40:1: 'multiprocessing.SimpleQueue' imported but unused
epc.py:41:1: 'multiprocessing.Process' imported but unused
epc.py:41:1: 'multiprocessing.Lock' imported but unused
epc.py:41:1: 'multiprocessing.SimpleQueue' imported but unused
main.py:60:1: 'pexpect' imported but unused
main.py:66:1: 'datetime' imported but unused
main.py:68:1: redefinition of unused 'subprocess' from line 63
main.py:70:1: 'multiprocessing.Process' imported but unused
main.py:70:1: 'multiprocessing.Lock' imported but unused
main.py:70:1: 'multiprocessing.SimpleQueue' imported but unused
provideUniqueImageTag.py:2:1: 'os' imported but unused
Integration: `2024.w42`
Closes#547, #853, #854, #858, #859, #862, #844, and #746
See merge request oai/openairinterface5g!3053
* !3047 Resolve compilation warnings on ARM
* !3052 Optimize T_ID() macro.
* !3045 CI: Reduce tested DL throughput on Aerial
* !3039 fix for Other SI reception when BWP start != 0
* !2997 websrv regression
* !3041 Update NR SA Tutorials
* !3042 Update TESTBenches.md to reflect current testbench
* !3004 Hotfix to remove an unwanted TX power reduction when using multiple TX antenna ports.
* reduce ssPBCH_BlockPower in gNB config of FHI7.2 pipeline
* !3046 A testsuite and a benchmark for RLC AM mode
* !3038 Various bugfixes for gNB stability, cleanup
* !3051 PUCCH2 DTX detection
* nr_psbchsim: fix segv by providing correct get_nrUE_params()
* !3049 Improve PUSCH and PUCCH SNR stability
* !3054 Allocate and add sD to DRB NSSAI in case sD != 0xffffff
Currently, sD has not been allocated, so the octet string is empty. Fix the
allocation to correctly write&read NSSAIs in UE context setup/modification
request messages.
When running, nr_psbchsim, we get this UBsan error:
openair1/PHY/NR_UE_ESTIMATION/nr_adjust_synch_ue.c:79:16: runtime error: member access within misaligned address 0x0ff4278c791c for type 'struct nrUE_params_t', which requires 8 byte alignment
The problem is that the corresponding definition of
get_nrUE_params() in psbchsim.c does not actually return the UE params,
but void, so we might or might not get something that resembles valid
data in nr_adjust_synch_ue.c. Fix this by including nr-uesoftmodem.h
(that provides the correct declaration) and define it correctly. Due to
type mismatches, also adapt downlink_frequency, uplink_frequency_offset,
and openair_cfg (which might result in the same type of bugs).
This adds DTX detection in PUCCH 2 receiver. This is detected by MAC
already which will drop PUCCH 2 indications that are detected as DTX.
For the moment this uses the same pucch0_dtx_threshold value indicated
in L1 section of the configuration file. The feature firstly reduces
unnecessary logging on stdout and the use of invalid CSI measurements in
the MAC scheduler.
Closes: #547
- Fixes#853, #854, #858, #859, #862
- handle repeated NGAP Initial context setup requests, thereby fixing assert:
Assertion (!ue_p->as_security_active) failed!
In rrc_gNB_generate_SecurityModeCommand() /home/eurecom/raymond/openairinterface5g/openair2/RRC/NR/rrc_gNB.c:2590
logic error: security already activ
- A lot of cleanup: remove almost all use of protocol_ctxt_t in 5G RRC and use
existing pointers instead
Introduce two tests for NR RLC AM entity:
- test_nr_rlc_am_entity
- benchmark_nr_rlc_am_entity
The benchmark can be used to verify processing time improvements for NR RLC AM
entity. The benchmark creates two entities and creates an unbalanced
communication channel between them with 10% loss packet loss and 100:1 PDU sent
ratio. This allows the lists in RLC to build up and triggers RLC AM code
related to looking through the segment/pdu lists.
Example benchmark output:
ubuntu@zeus:~/bpodrygajlo/openairinterface5g/cmake_targets/build$ ./openair2/LAYER2/nr_rlc/tests/benchmark_nr_rlc_am_entity
[LOG] init aborted, configuration couldn't be performed
log init done
CMDLINE: "./openair2/LAYER2/nr_rlc/tests/benchmark_nr_rlc_am_entity"
[CONFIG] debug flags: 0x00400000
2024-10-16T14:58:20+02:00
Running ./openair2/LAYER2/nr_rlc/tests/benchmark_nr_rlc_am_entity
Run on (8 X 4700 MHz CPU s)
CPU Caches:
L1 Data 48 KiB (x4)
L1 Instruction 32 KiB (x4)
L2 Unified 1280 KiB (x4)
L3 Unified 12288 KiB (x1)
Load Average: 0.48, 0.27, 0.20
***WARNING*** CPU scaling is enabled, the benchmark real time measurements may be noisy and will incur extra overhead.
--------------------------------------------------------------------
Benchmark Time CPU Iterations
--------------------------------------------------------------------
BM_nr_rlc_am_entity/100 50096 ns 50097 ns 13101
BM_nr_rlc_am_entity/256 140386 ns 140387 ns 4868
BM_nr_rlc_am_entity/1024 536323 ns 536311 ns 1309
BM_nr_rlc_am_entity/4096 2084464 ns 2084385 ns 338
BM_nr_rlc_am_entity/16384 8309318 ns 8309458 ns 81
BM_nr_rlc_am_entity/20000 9843792 ns 9843774 ns 68
This hotfix removes division by num_antenna_ports in PDSCH precoding matrix generation.
These matrices are defined for CSI reporting in this way but here we are using them for
transmission and this results in an unwanted 10*log10(num_antenna_ports) reduction in
transmit power (3dB for 2 antenna ports, 6dB for 4 antenna ports, etc.)
Robert Schmidt