- remove global variables in the function lte_est_timing_advance_pusch
- do the smoothing logic that was in lte_est_timing_advance_pusch
in rx_sdu (is it necessary? is it correct?)
- put back the value 100 in prach_procedures for the test on prach energy
- change the value of timing_advance_update
it was:
timing_advance_update = sync_pos - eNB->frame_parms.nb_prefix_samples/4; //to check
it is now:
timing_advance_update = sync_pos; // - eNB->frame_parms.nb_prefix_samples/4; //to check
this should be checked somehow. The computation looked suspicious. Maybe
the new one is wrong.
phy_init_lte_ue_signal was renamed init_lte_ue_signal in openair1/PHY/INIT/defs.h
maybe it's the opposite that should have been done?
Functions used in one file and defined in another may have been
declared in the wrong header file.
TODO: if the UE did random access (followed by a MAC uplink with
CRNTI) because none of its scheduling request was granted, then
according to 36.321 5.4.4 the UE's MAC will notify RRC to release
PUCCH/SRS. According to 36.331 5.3.13 the UE will then apply
default configuration for CQI reporting and scheduling requests,
which basically means that the CQI requests won't work anymore and
that the UE won't do any scheduling request anymore as long as the
eNB doesn't reconfigure the UE.
We have to take care of this. As the code is, nothing is done and
the UE state in the eNB is wrong.
- change target values
- change upper/lower limit to trigger a tpc
- don't use ul_cqi from SR
The value of ul_cqi is not convincing, for both PUSCH and PUCCH,
more work/analysis is required.
- better ulsch harq management in phy (maybe not over)
- don't do schedule_CSI if UE not in RRC_CONNECTED (not sure if correct)
- don't call find_ulsch in fill_dci0
- some spaces cleaned
- log improved
- re-use ta_timer
- when ta_timer is running:
- no TA sent to UE
- no TA from UE (for UE to have time to apply previous TA command)
- decrease ta_timer every TTI
- be careful to use correct value of ta_update (31 means no TA)
Maybe not correct, to be checked.
- don't use o_flip anymore in ulsch_decoding
- remove dl_cqi from eNB_UE_STATS
- put dl_cqi[NFAPI_CC_MAX] in UE_sched_ctrl
- adapt code for this dl_cqi change (from eNB_UE_STATS to UE_sched_ctrl)
- extract_pusch_csi has been fixed for CQI_ReportModeAperiodic_rm30,
the others need to be done. Program will exit if one uses them.
Not sure if setting sched_ctl->dl_cqi[CC_idP] has to be done in this
function...
Raymond Knopp