Remove netlink code, and the PDCP_USE_NETLINK macro, as there is no
known use, it makes the code more complicated, and is simply "technical
debt".
In 4G PDCP, a subtle change has been introduced, in pdcp_module_init()
of pdcp.c. Looking at the diff of this commit, it can be seen that there
is now a new "else-if (ENB_NAS_USE_TUN_W_MBMS_BIT)" branch that is under
what was the "if (PDCP_USE_NETLINK)" branch, while the code fragment was
actually inside the "else" branch of PDCP_USE_NETLINK. This seems to be
necessary: previously, if we did not use noS1 mode and we don't use any
TUN (i.e., the eNB), the else block would set up this interface. It is
important that this interface is brought up, because if we omit it,
RFsim will not work. It seems to me that this interface will regularly
create some traffic; without it, RFsim will be blocked, and the UE
cannot connect.
In short, it seems to be important to have the MBMS interface, which
injects traffic in the RFsim side, which will unblock RFsim. The change
in pdcp_module_init() preserves the total changes of the if-else
(PDCP_USE_NETLINK).
Remove function pointers that were used in the past to implement the
F1(-U) interface in 4G, i.e., to have different functions to handle
split/monolithic operations. As we don't have F1 in 4G anymore (see
commit 9dc2282249), we don't need the
function pointers anymore.
On that occasion, rename the 5G functions by prepending nr_ to them;
this allows to refactor the interface in 5G further (which is not the
focus of this changeset).
Integration: `2024.w28`
See merge request oai/openairinterface5g!2856
* !2847 UE setting wrong frequency in 5G rfsimulator SA test
* !2850 NR UE MAC DCI 00 BWP handling
* !2852 \[E2 agent\] Move UE RRC_CONNECTED state signaling
* !2851 Minor code cleanup and fixes
* !2842 UE assertion for msg1_SubcarrierSpacing in RA
* !2831 PUSCH power control state
* !2838 NR UE UL FAPI PDU length fix
* !2723 add initial NTN support for NR UE
* !2764 Adding 7.2 containerfiles and docker-compose
* !2827 Increase RX_DATA.indication PDU Length to 32 bits
- Reworked nrLDPC_decoder_offload.c to process all segments in a TB with a single call to LDPCdecoder() or LDPCencoder().
- Perform CRC checks on the T2.
- Modified nr_ulsch_decoding (gNB decoder) to:
- Count processed segments.
- Properly perform CRC checks.
- Created a constant NR_LDPC_MAX_NUM_CB to define the maximum number of codeblocks.
- Conditional library loading:
- On gNB: Load ldpc_t2 library if offload is enabled using the --ldpc-offload-enable flag.
- On UE: Load both ldpc_t2 and ldpc libraries since only encoder offload is supported.
- General cleanup of nrLDPC_decoder_offload.c for improved readability and maintainability.
- Modified the structure of LDPC encoder/decoder/offload parameters:
- Introduced a structure for code block (CB) related parameters.
- Removed parameter E from the encoder and offload parameter structures for clarity.
- Replaced E with perCB->E_cb in the UE encoder code.
- Phy config update and Sidelink frame parameters initialisation
- PSBCH scheduler to trigger TX PSBCH/RX PSBCH actions
- Sidelink indication with rx ind to trigger send SL-MIB to MAC
- Enable Scope for PSBCH use -d or --dqt
- Enable system testing of PSBCH for example using RFSIMULATOR:
- UE1 is a SYNCRONISATION SOURCE UE which transmits PSBCH
started using command -
sudo ./nr-uesoftmodem --sl-mode 2 --sync-ref 4 --rfsim --rfsimulator.serveraddr server
- UE2 syncs onto UE1 during sidelink search, gets the timing and continues to receive PSBCH
started using command -
sudo ./nr-uesoftmodem --sl-mode 2 --rfsim --rfsimulator.serveraddr 127.0.0.1
- In the default use case 2 Sidelink SSBs sent over 16 frames.
- In case SL-SSB configuration needs to be changed use -O option in the above command like
-O ../../../targets/PROJECTS/NR-SIDELINK/CONF/sidelink_preconfig_1txpool.conf
The main thread of nr-uesoftmodem (executing main()) is mostly working;
it is thus not necessary to set high priority. Instead, the threads
created with threadCreate() will receive higher priority, if possible
(as determined by the availability of SYS_NICE capability).
To inform if SYS_NICE is not present, print a warning in main().
set_latency_target() attempts to set keep "low latency" by
- writing a specific latency to /dev/cpu_dma_latency
- setting manually the minimum CPU processor frequency to be the maximum
There is no functionality to undo this after stopping the softmodem(s),
and most users are probably not even aware that OAI does this. It is
generally preferable to set this beforehand using a governor or by
disabling sleep states (as outlined in the tutorial, and in a follow-up
commit in the performance tuning docs).
The previous mlockall() call, to lock memory to RAM, is retained in a
new function. There were additional mlockall() calls, which have been
replaced with lock_memory_to_ram(), where necessary.
They use 4G NUMBER_OF_UE_MAX, which is not supposed to be present in 5G.
Further, the mutex and variable are global state; for Paging, we should
use F1.
Introduce a --no-itti-threads command line option to disable threading
in ITTI, and call message handlers in the current thread. This is being
introduced in order to increase repeatability when testing the nrUE with
the IQPlayer. Without this feature, runs with the IQPlayer will end up
differently, depending on the timing of ITTI threads, mostly when
sending messages to RRC and NAS.
Config options --reconfig_file and --rbconfig-file have been introduced
to modify the filenames of reconfig.raw and rbconfig.raw (e.g., in the
case of multiple UEs). These filen*ames* were to be prepended with
--rrc_config_path to set the path. In summary, three options were
necessary, when two are sufficient.
In this commit, change to the options --reconfig-file and
--rbconfig-file (slight change for harmonization with other options,
which mostly use dashes) to give the full path to the corresponding
files, and avoid to surprise users who would not expect to have three
options.
--rrc_config_path has been deprecated and an error will be printed if a
user attempts to use it.
- move following radios: AW2S, BladeRF, IRIS, LMSSDR, RFsimulator, USRP
- move following transports: Ethernet, benetel4g, benetel5g
- for each: create independent cmake variable to switch compilation
on/off, in order: OAI_AW2S, OAI_BLADERF, OAI_IRIS, OAI_LMSSDR,
OAI_SIMU, OAI_USRP, OAI_ETHERNET, OAI_BENETEL4G, OAI_BENETEL5G
- Remove RF_BOARD variable, allows to compile multiple boards at once
- where applicable: remove USERSPACE/LIB in path, i.e., move files up to
directories, as all are userspace libraries
Note that with the above, it is now mandatory to enable a radio
implementation before compiling it, e.g., for USRP:
./build_oai -w USRP
cmake .. -DOAI_USRP=ON && ninja oai_usrpdevif
Robert Schmidt