Since long long is the bigger type ( 8 bytes ) of the two used ( long long and uint32_t ),
and long long is also available on ARM, change this parameter to always have this type.
This allows to always use format specifier '%lld' in the logs that use TICK_TO_US, which would otherwise return long long or uint32_t depending on architecture.
Set a maximum SNR value using the "-S" option to ensure that nr_dlsim
or nr_ulsim is executed only for a given SNR. This approach allows us
to verify the success of the encoding/decoding process at the specified
SNR. Check if the test succeeds is not yet implemented (currently we
only retrieve an information about encoding/decoding processing time).
To be implemented in the separate MR.
Always execute all the nr_dlsim/nr_ulsim tests even if one of them
fails. Each test takes around 5s, so we can execute them all to get
results for all the test scenarios.
which will drop PUCCH 2 indications that are detected as DTX. For the
moment this uses the same pucch0_dtx_threshold value indicated in L1
section of the configuration file.
rrc_gNB_process_security() does not only set (process) the security
algorithms, but also checks for those. However, we don't use the check.
Simplify the function, to reintroduce the check later. Rename to
set_UE_security_algos() to better reflect what the functions do.
- remove Sphex UE - not used anymore
- remove RAN-L2-Sim-Test-5G from a list of pipelines - currently disabled
- 4G RFSim was moved to cacofonix
- minor cleanup
Integration: `2024.w41`
See merge request oai/openairinterface5g!3032
* !3006 Fix some sizeof and switch-case issues
* !3028 Add CMakePresets.json
* !3011 Aerial: cleanup unused code, avoid superfluous memcpy(), avoid L1 structures
* !3022 NR CSI-RS L1 refactoring → check CI
* !2935 Improvements in handling the beamforming procedure via FAPI
* !3026 NR ULSCH scheduler fix when using transform precoding
* !3031 CI: Increase test bitrates for 100 MHz scenario in SA-2x2 pipeline
* !3017 Fix SRS
* !2731 Implementation of 2-Step RA
* !3027 Add dockerized include what you use tool
3GPP 38.331: If absent, the UE applies the SCS as derived from the prach-ConfigurationIndex in RACH-ConfigGeneric (see tables Table 6.3.3.1-1, Table 6.3.3.1-2, Table 6.3.3.2-2 and Table 6.3.3.2-3, TS 38.211 [16]).
This procedure for msg1_SubcarrierSpacing NULL is not implemented, so we aplly the same value of UL SCS.
Introduce CMakePresests.json which is a simple way to perform incremental build using cmake
New configure resets were added:
- default: Configure compilation with default options
- tests: Same as above but ENABLE_TESTS and SANITIZE_ADDRESS is ON
New build presets were added:
- 5gdefault: Build the software for NR rfsimulator test
- default: same as 5gdefault
- 4gdefault: Build the software for LTE rfsimulator test
- tests: build all unit tests
To configure using configuration preset:
`cmake --preset <preset_name>`
To build using a build preset:
`cmake --build --preset <preset_name>`
Modify the UL/DL UDP iperf test cases to use a higher requested bitrate
for the scenario with 100 MHz bandwidth in the SA-2x2 pipeline. Adjust
gNB config file to allow for higher UL throughput.
Resolve error:
nfapi/oai_integration/aerial/fapi_nvIPC.h:56:16: error: unknown type name ‘nvipc_params_t’
56 | int nvIPC_Init(nvipc_params_t nvipc_params_s);
By including the header. Also, move the definiton of the struct to the
MAC, where it is actually stored, and out of the radio common_lib.h,
since this is not a radio (split 7/8) parameter.
When compiling aerial, we compile without CUDA support (see e.g.,
docker/Dockerfile.gNB.aerial.ubuntu22). Hence, do not check for it in
aerial for the moment, we won't use it for the foreseeable future.
In Aerial bindings (FAPI-Aerial), the NFAPI mode must be
NFAPI_MODE_AERIAL (otherwise, we would not be executing this code).
Hence, the switches don't make sense. Remove them.
The check can more easily be checked with
git show <commit> --ignore-all-space
Rúben Soares Silva