Integrate NRPPA and NGAP messages required for positioning
This MR integrates NRPPA and NGAP messages required for positioning.
The following NGAP messages are integrated (3GPP 38.413 Version 16.0.0):
NGAP UPLINK UE ASSOCIATED NRPPA TRANSPORT
NGAP UPLINK NON UE ASSOCIATED NRPPA TRANSPORT
NGAP DOWNLINK UE ASSOCIATED NRPPA TRANSPORT
NGAP DOWNLINK NON UE ASSOCIATED NRPPA TRANSPORT
The following NRPPA messages are integrated (3GPP 38.455 Version 16.7.1):
TRP Information Request
TRP Information Response
Positioning Information Request
Positioning Information Response
Positioning activation request
Positioning Activation Response
Measurement Request
Measurement Response
This MR tests these messages via a standalone tester nr-cu-nrppa-test that
connects to the AMF to perform NGAP enc/dec and NRPPA enc/dec
Core Network:
To pull the docker images:
docker pull oaisoftwarealliance/ims:latest
docker pull oaisoftwarealliance/oai-amf:develop
docker pull oaisoftwarealliance/oai-nrf:develop
docker pull oaisoftwarealliance/oai-smf:develop
docker pull oaisoftwarealliance/oai-udr:develop
docker pull oaisoftwarealliance/oai-upf:develop
docker pull oaisoftwarealliance/oai-udm:develop
docker pull oaisoftwarealliance/oai-ausf:develop
docker pull oaisoftwarealliance/oai-lmf:develop
openairinterface5g$ cd doc/tutorial_resources/oai-cn5g
To deploy:
openairinterface5g/doc/tutorial_resources/oai-cn5g$ docker compose -f docker-compose-positioning.yaml up -d
To undeploy:
openairinterface5g/doc/tutorial_resources/oai-cn5g$ docker compose -f docker-compose-positioning.yaml down -t 0
RAN:
To compile:
openairinterface5g$ mkdir build
openairinterface5g$ cd build
openairinterface5g/build$ cmake .. -GNinja
openairinterface5g/build$ ninja nr-cu-nrppa-test
To run:
openairinterface5g/build$ LD_LIBRARY_PATH=. ./tests/nr-cu-nrppa/nr-cu-nrppa-test -O ../tests/nr-cu-nrppa/nr-nrppa-test.conf
To initiate positioning procedure:
openairinterface5g$ cd doc/tutorial_resources/positioning/
openairinterface5g/doc/tutorial_resources/positioning$ curl --http2-prior-knowledge -H "Content-Type: application/json" -d "@InputData.json" -X POST http://192.168.70.141:8080/nlmf-loc/v1/determine-location
Remove Ubuntu 20 and RHEL/Rocky 8 support, increase cmake min version
Ubuntu 20 is EOL [1]. This was the version with the lowest CMake version, so
we can increment the minimum CMake version to 3.19 as well. Increasing the
minimum version will in particular help with the integration of CUDA (updates
in 3.17 and 3.18), the current 3.19 brings better support for apple silicon.
Some minor CMake updates (removing superfluous files and dependencies).
[1] https://ubuntu.com/blog/ubuntu-20-04-lts-end-of-life-standard-support-is-coming-to-an-end-heres-how-to-prepare
UE: Fix if target cell during handover has SSB at a different offset as in source cell
These changes fixed these observed issues:
- If target cell has a different SSB position compared to source cell during
ho - sync was not successful.
- RAR does not get decoded if SSB position has changed on the target cell
compared to source cell.
without this fix, after sync is successful, RAR is not getting decoded.
PDCCH area also changes as SSB offset can change. if MAC configuration changes.
Actual problem is that SYNC does not happen on the target cell as frame parameters is not updated
and ssb start carrier is not correct in the UE frame parameters
function nr_get_ssb_start_sc to determine ssb_start_subcarrier
Ubuntu 20 is EOL [1] unless people pay for support. Therefore, remove it
from build_helper. People can still use it, but might need to install a
more recent cmake version (which the next commit will upgrade). The rest
should be the same.
[1] https://ubuntu.com/about/release-cycle
- Performs NGAP setup request and handles NGAP setup response
- This is introduced to test NGAP enc/dec of the NRPPa messages
To compile:
openairinterface5g$ mkdir build
openairinterface5g$ cd build
openairinterface5g/build$ cmake .. -GNinja
openairinterface5g/build$ ninja nr-cu-nrppa-test
To run:
openairinterface5g/build$ LD_LIBRARY_PATH=. ./tests/nr-cu-nrppa/nr-cu-nrppa-test -O ../tests/nr-cu-nrppa/nr-nrppa-test.conf
Integration `2026.w09`
* !3944 Fail early if configuration module can not initialize properly
* !3945 gNB: Reset NDI only after usage in case of disable HARQ
* !3822 NR UE: fix PRACH k1 calculation at MAC when handover
* !3874 print better message for rsrp: invalid doesn't mean it is not measures, it...
* !3928 NR UE: correctly compute writeTimestamp for SCS > 30 kHz with rf-simulator
* !3949 fix: removed the nssai_sd parameter in the ue.conf file
* !3897 Change Aerial config file in targets to match Nvidia's CI setup
* !3951 Fix handling of IPv4v6 PDU sessions
* !3940 IPV6 support for telnet socket binding
* !3947 Add missing packing for CONFIG.request parameter BetaPSS
* !3871 Support for up to 12 ports in NR gNB
* !3943 Remove L1 dependence from NR band number
* !3892 Synchronize multiple gNBs by aliging their the slot boundaries
* !3952 Fixes for Initial UE Context Setup
* !3953 Improvements in compilation dependence
* change dl_absoluteFrequencyPointA in targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.24PRB.usrpb210.conf to 640032
* !3900 [CI] Pull Ubuntu base image from internal registry
* !3910 GPU Channel Simulation: nr_dlsim/nr_ulsim Integration + CI Test
* !3942 CI: rework log analysis to simplify and allow new use cases
* !3870 Configure CSI-RS according to beam_id used by UE
Closes#897 and #834
See merge request oai/openairinterface5g!3950
Configure CSI-RS according to beam_id used by UE
This MR is to configure CSI-RS according to beam_id used by UE and
reconfigure upon beam change.
It has been tested with RFSIM, Liteon and Microamp under multiple beams.
CI: rework log analysis to simplify and allow new use cases
The CI has some log analysis, but it is unmaintainable (huge functions
that mix eNB/gNB or lteUE/nrUE, are not tested, most of it is not used
or useful...) or limited to specific use cases (the timing-phytest time
analysis is hardcoded to source builds instead of also handling analysis
when running from docker images). This MR reimplements both functions.
For the log analysis, the CI team decided to throw away the old
analysis, and reimplement a mechanism that checks the couple of things
we care for.
- Allow to analyze phy-test timing analysis from docker files, and add a
unit test
- Rework existing log analysis to remove useless checks, and make it
more composable
* The undeployment steps (Undeploy_Object(), Terminate_eNB()) take an
<analysis> XML object which then either has a <services> subelement
with check that are whitespace delimited (similar to how other xml
task steps have <services>). For checks that contain whitespace,
they can use <service> (singular) that encodes a single check, such
that e.g., arguments could include spaces.
* Each check is of form service=check[=arguments], where service is
the docker services, check is a checking function (implemented as a
class with run(file, options) function inside cls_loganalysis.py,
and options arguments after the second = that is to be read by run()
(basically, options will contain arguments that can be freeform)
* these definitions can occur multiple times, e.g., it could be
serviceA=Check1 and serviceA=Check2=Args and it will execute both
Check1 and Check2
* if a service is declared, it will execute alse the Default check
which currently checks for an assertion
* Implemented (and inspired from the existing CI analysis) are:
- Default check to check for assertions (will be extended, to e.g.,
address/undefined behavior sanitizer analysis)
- RetxCheck: retransmission check as used in the CI
- LastLineContains to check the last line containes a specific
string
- ContainsString to check a specific string appears in logs
- EndsWithBye: check that towards the end (but not necessarily the
last line), there is a Bye. string (a workaround since we don't
always terminate with 0)
- There is a plan to use return codes after stopping in docker, but most
executables do not end with 0 most of the time, such that we needed to
abandon this plan.
- Additional fixes (see commit messages) and delete unused code
GPU Channel Simulation: nr_dlsim/nr_ulsim Integration + CI Test
This MR is a follow-up to !3886 (merged) and extends CUDA-based channel
simulation support to nr_dlsim and nr_ulsim, together with the
corresponding CI tests.
The MR incorporates:
- Cherry-picked commits e0c204f7 and 5f344876 from !3588
- Integration of new CI physim tests using GPU-accelerated channel
simulation in nr_dlsim and nr_ulsim tests, see commit c727b3bb
New CI job: RAN-Channel-Simulation
https://jenkins-oai.eurecom.fr/job/RAN-Channel-Simulation/
[CI] Pull Ubuntu base image from internal registry
This MR updates the Docker build process for OAI images to use a private
registry for the Ubuntu base image ubuntu:noble. This will reduce the
possibility for CI disruption if no internet connection exists.
- Replace FROM ubuntu:noble with FROM <DEFAULT_REGISTRY>/ubuntu:noble in Ubuntu Dockerfiles
This change overcomes the pull rate limit issues from DockerHub in the
CI.
The <DEFAULT_REGISTRY> contains a multi-architecture image (arm64 and
amd64)
$ docker buildx imagetools inspect gracehopper3-oai.sboai.cs.eurecom.fr/ubuntu:noble | grep Platform
Platform: linux/amd64
Platform: linux/arm64
- The scripts run from the jenkins server everyday using a crontab.
- It pulls the AMD and ARM ubuntu:noble image on respective servers and
checks if the internal registry is in sync.
- If not, it pushes the ubuntu:noble image to the registry to remain in
sync with dockerhub.
It was initially foreseen to just check the program exit code, but most
executables don't return with 0 (so the CI would always fail). Add a
separate check that will check for the Bye., only going through the last
X lines instead of the entire file.
Jaroslava Fiedlerova