Reduce throughput requirement, as this fails once two DUs are connected
to a UE, which creates more load on the machine and frequently fails
with low throughput.
CI: Enable Physim threshold check for tests on Caracal and GH
This MR adds support for configurable timing threshold files in PhySim
tests.
- Introduces a new CMake cache variable PHYSIM_CHECK_FILES to specify
one or more timing threshold files (semicolon-separated).
- Enables optional enforcement of timing thresholds check in PhySim
tests without changing existing test definitions.
- Defines timing thresholds for LDPC encoding/decoding in nr_ulsim,
nr_dlsim and ldpctest on Caracal and GH machines.
SRS noise power
This MR implements the calculation of the noise power based on SRS in a
different way, and check whether SNR is more accurate or not. This MR is
built on top of the MR: !3460
A graph was added in T_Tracer to observe UL-SNR calculated using SRS.
See merge request description for measurement results.
Replace the previous add_timed_physim_test() macro with add_physim_test()
to use a single, unified function for defining physim tests. This simplifies
the test configuration and removes redundant macro definitions while keeping
all existing functionality.
This change follows up on the earlier addition of support for including
custom timing threshold files (PHYSIM_CHECK_FILES).
Update existing tests accordingly.
Add missing timinig analysis scripts to RHEL9 physim docker image. These files
are now copied from the build stage to /oai-ran/openair1/SIMULATION/tests/,
where they are expected by ctest.
Resolves following issue when running ctest in docker container:
CMake Error: Error processing file: /oai-ran/openair1/SIMULATION/tests/RunTimedTest.cmake
For some physical simulators, we have multiple SNR iterations.
The previous version of the script correctly retained only the last
measurement, but if a previous measurement condition set RC=1, the
script would fail although the final "good" run might fulfil the
measurement condition (IOW, it would show SUCCESS, but still fail on the
check).
Instead, check if all measurement lines finish on SUCCESS, which handles
the above case.
The awk script in analyze-timing.sh used syntax that works with gawk but fails
on systems where mawk is the default implementation, producing errors such as:
awk: /dev/fd/3: line 6: syntax error at or near ,
-- test command finished with SIGPIPE
Concretely, the match(text, pattern, variable) function does not exist
in mawk, as it cannot capture matches in variables. Work around by
substituing strings, and force a numeric comparison.
Fixes to prevent assertion due to 0 PRB allocation
Assertion (NPRB>0 && (NPRB + RBstart <= BWPsize)) failed!
In PRBalloc_to_locationandbandwidth0() /home/user/openairinterface5g/common/utils/nr/nr_common.c:506
Illegal NPRB/RBstart Configuration (0,51) for BWPsize 51
Probably caused by missing safeguards to prevent computing TBS with 0 PRB
as input.
Fix OAI UE memory leaks
Fix 1: Replaced asn1cFreeStruc with ASN_STRUCT_FREE in MAC layer to properly
free nested ASN.1 structures in cell group configuration.
Fix 2: Removed premature nullification of dedicatedNAS_Message->buf in
dlInformationTransfer processing to allow proper ASN.1 cleanup.
Fix 3: Fixed memory ownership in nr_rrc_process_dedicatedNAS_MessageList by
copying OCTET_STRING data instead of transferring ownership, preventing
ASN.1 cleanup from losing track of allocated memory
Closes#828
fix RSRP computation at UE
Conflicts between !3595 (merged) and !3596 (merged) leading to double conversion
of RSRP into index in L1 and L2. With this fix it is only converted in L2.
Replace int16 min when obvious
INT16_MIN doesn't have a opposite value on 16 bits, so SIMD abs (absolute()), or
simple C operations doesn't make the expected result.
example:
(gdb) p (short)-(short)-32768
$4 = -32768
(gdb)
This MR replaces constants INT16_MIN by -INT16_MAX (so -32767) in places where
it used for mathematical operations. This is not perfect, nevertheless reduces
overflow probability.
We saw in some places a dirty case: code do first calls to _mm_adds_epi16
(or subs), so because of the saturated operations, the probability to reach
32767 and -32768 is higher than the other numbers but, _mm_abs_epi16(), or
negate operations (conjugate) can follow, that is making strong error as
abs(-32768)=-32768
Also, don't use "set -x" debugging for oc login command:
ci-scripts/cls_cmd.py:242 sets BASH_XTRACEFD=1, which makes that all
"set -x" output is in stdout, leading to a redirect to the file into
which we redirect. This would lead to the following error with
unsuccessfull oc login:
error: You are not a member of project "****-core-for-ci-ran".
Error from server (Forbidden): imagestreams.image.openshift.io "oai-physim"
is forbidden: User "system:anonymous" cannot get resource "imagestreams" in
API group "image.openshift.io" in the namespace "****-ran"
This fixes basically two problems. First, remove "set -e", which leads
to the script exiting on error. For instance, there was the sleep which
should account for the time of the pod being in "ContainerCreating", but
might not be enough. In that case, the script would exit, leaving the
pod deployed.
Second, a fixed time is not good, as it can be too short and unduly
prolong waiting time. Replace with a loop.
- Remove unnecessary NULL assignment for dedicatedNAS_Message->buf
- The original buffer is copied and transfered to NAS, so it can be properly freed by ASN.1 structure cleanup
Root cause: Code was nullifying dedicatedNAS_Message->buf pointer before ASN.1 cleanup could free the original allocation, causing the leak from OCTET_STRING_decode_uper.
AddressSanitizer leak trace (FIXED):
Direct leak of 119 byte(s) in 3 object(s) allocated from:
/#0 0x7ec2a42b4c38 in __interceptor_realloc
/#1 0x555fade852e0 in OCTET_STRING_decode_uper
/#9 0x555fadb48b11 in nr_rrc_ue_decode_dcch.
The leak was caused by improper memory ownership handling in the
dedicatedNAS_MessageList processing. The function was transferring
buffer ownership to NAS messages and then preventing ASN.1 cleanup
from freeing the original allocations by setting
list.count = 0, causing a memory leak.
Leak trace:
Direct leak of 40 byte(s) in 1 object(s) allocated from:
/#0 0x7f2ce3ab4a57 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
/#1 0x567907083f0f in OCTET_STRING_decode_uper /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/OCTET_STRING_uper.c:89
/#2 0x5679070ed5e6 in SET_OF_decode_uper /cmake_targets/ran_build/build/openair2/RRC/NR/MESSAGES/constr_SET_OF_uper.c:70
/#3 0x56790707b6dc in SEQUENCE_decode_uper /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE_uper.c:118
/#4 0x56790707b6dc in SEQUENCE_decode_uper /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE_uper.c:118
/#5 0x56790709a403 in CHOICE_decode_uper /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/constr_CHOICE_uper.c:84
/#6 0x56790707b6dc in SEQUENCE_decode_uper /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE_uper.c:118
/#7 0x56790709a403 in CHOICE_decode_uper /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/constr_CHOICE_uper.c:84
/#8 0x56790709a403 in CHOICE_decode_uper /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/constr_CHOICE_uper.c:84
/#9 0x56790707b6dc in SEQUENCE_decode_uper /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE_uper.c:118
/#10 0x56790708b5f1 in uper_decode /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/uper_decoder.c:83
/#11 0x567906d44b4b in nr_rrc_ue_decode_dcch /openair2/RRC/NR_UE/rrc_UE.c:2212
/#12 0x567906d520a3 in rrc_nrue /openair2/RRC/NR_UE/rrc_UE.c:2615
/#13 0x567906d5f77e in rrc_nrue_task /openair2/RRC/NR_UE/rrc_UE.c:2501
/#14 0x7f2ce2494ac2 in start_thread nptl/pthread_create.c:442
Fix:
- Copy OCTET_STRING data instead of transferring ownership
- Allow ASN.1 cleanup to properly free original allocations
This fixes the leak that occurred during rrcReconfiguration
message processing when dedicatedNAS_MessageList was present.
Closes#828
- Replace asn1cFreeStruc with ASN_STRUCT_FREE in MAC layer cleanup
- Fixes improper memory management of NR_CellGroupConfig structures
Root cause: asn1cFreeStruc only calls ASN_STRUCT_RESET + free(), which doesn't properly free nested ASN.1 allocations. ASN_STRUCT_FREE frees all nested structures completely.
AddressSanitizer leak trace:
Direct leak of 288 byte(s) in 1 object(s) allocated from:
/#0 0x7fb72bab4a57 in __interceptor_calloc
/#1 0x593752b28d0d in SEQUENCE_decode_uper
/#2 0x593752b9a546 in SET_OF_decode_uper
/#3 0x593752b2863c in SEQUENCE_decode_uper
/#4 0x593752b47363 in CHOICE_decode_uper
/#5 0x593752b2863c in SEQUENCE_decode_uper
/#6 0x593752b2863c in SEQUENCE_decode_uper
/#7 0x593752b2863c in SEQUENCE_decode_uper
/#8 0x593752b2863c in SEQUENCE_decode_uper
/#9 0x593752b2863c in SEQUENCE_decode_uper
/#10 0x593752b38551 in uper_decode
/#11 0x5937527d859f in nr_rrc_ue_process_masterCellGroup
/#12 0x5937527d9408 in nr_rrc_process_reconfiguration_v1530
/#13 0x5937527dd5bb in nr_rrc_ue_process_rrcReconfiguration
/#14 0x5937527f5e6b in nr_rrc_ue_decode_dcch
/#15 0x5937527ff003 in rrc_nrue
/#16 0x59375280c6de in rrc_nrue_task
Integration: `2025.w40`
* !3672 \[ci\] Fix MissingPropertyException - COTS-UE by binding OAI_Registry globally
* !3609 BWP with no PRACH occasions
* !3657 do not assert for mismatched TBS in phy-test mode
* !3667 CI: Updates for HO and AW2S pipeline
* !3674 NR UE: remove function get_nr_RSRP() and get_nr_rx_total_gain_dB() for cleanup
* !3478 NR UE: add UCI (HARQ-ACK/NACK) on PUSCH support at PHY
* !3664 modulation LUTs size was wrong, and remove inconsistent test of SSE2 enable
* !3665 Make all targets compile
* !3554 Handle failures in RRCReconfiguration encoding gracefully
* !3655 Improvements to N2 handover
* !3678 Add OAIUE longrun pipeline
* !3628 Update documentation
Closes#979, #726, #959, #967, and #930
See merge request oai/openairinterface5g!3676
Add OAIUE longrun pipeline
Add a new XML file for OAIUE longrun.
- Test description:
* 40 MHz BW, n78
* gNB with USRP N310, UE with USRP N310
* CN deployed on OC
- Test duration: 1 hour
- Test scenario: 3x DL 10 min test (20 Mbps) + 3x UL 10 min test (5
Mbps)
pods deployed through helm occasionally take more time, leading to
errors such as
Error from server (BadRequest): container "physim" in pod "oai-physims-4g-sczvl" is waiting to start: ContainerCreating
Give a bit more time before checking the logs. We cannot wait too much,
as the container will just end on FINISHED in running state, so the logs
will always be there.
Make all targets compile
This MR enables us to compile all targets, and does that in one CI test. This
closes#726. Now, this should work:
cd ~/openairinterface5g
mkdir build && cd build
cmake .. -GNinja && ninja
To achieve this, I did the following:
- some targets have been fixed (warnings, errors)
- some targets have been removed when they did not seem to serve a good purpose
(e.g., an almost empty test)
- some targets have been commented (e.g., LTE simulators, some unitary tests)
which we maybe want to revive in the future
- some targets built when just building with ninja, but not all. For instance,
telnetsrv_enb would typically build, but it was missing a dependency. Doing
cmake .. -GNinja && ninja telnetsrv_enb would show this (in develop)
To help with the last bullet point, there is a script compile_targets.sh that
can compile targets independently (and in parallel, to not wait for ages) to
show that targets compile properly compile-targets.patch.
In almost all cases, the problem is that a specific module uses the logging
module, which depends on T, which needs to dynamically create headers. The way
to do this is to have a dependency, and many targets use generate_T or {T_LIB}
({} intentional: T might be absent, so then it evaluates to nothing). However,
not all do this, and those that depend on T actually don't depend on T, but on
the logging module, which in turn depends on T. So in many places, a simple
dependency onto log_headers fixes this problem, and generate_T or {T_LIB}
simplifies the dependency (but not always). The commits should have more info.
Note that at least the targets in FlexRIC do not all compile, at least in the
configuration that we use in docker/Dockerfile.build.ubuntu. So for the latter,
we cannot build with a simple ninja, but FlexRIC seems to be the only one that
does not compile. Since FlexRIC is a separate repository, that needs to be
addressed in the corresponding repository.
Previously, the script attempted to directly merge ${merge}, which could f
ail if the branch was not already available locally. This update explicitly
fetches the branch from origin and then merges FETCH_HEAD with --ff, ensuring
the merge works even when the branch is missing locally.
Guido Casati