Bugfix: make longer telnet cmdfunc names
The maximum number of cmdfunc names is 20, which IMO is too low. Worse, if it's
longer, nothing will warn us because C will just fill the array to it's end
(without \0 at the end). To remedy this:
- Allow longer names till 64 bytes (I hit the previous limit of 20)
- Check that the name is within the length limit: if somebody wants a very long
name, the strnlen() will return the maximum length, hitting that assertion.
- When reading a command during runtime, allow the corresponding maximum length.
On that occasion, also increase total number of permitted cmdfuncs.
Use flat buffer for txdataF in gNB L1
This MR changes txdataF buffer format to hold freq domain data starting from
PRB0 instead of circular buffer that starts from PRB N/2. The motive is to
simplify RE mapping function in L1 and copying data to xran lib.
XNAP: Add encode/decode and unit tests for Xn Setup Request/Response/Failure
This MR adds complete support for the following in accordance with
3GPP TS 38.423 v16.2.0
- Add Xn Setup Request, Response, and Failure message type definitions
- Implement ASN.1 encode/decode for all Xn Setup messages
- Add equality checks and memory management helpers
- Create XNAP unit test infrastructure
Co-author: @venkatareddy
Acknowledgement
This work was carried out as part of research and development at Indian
Institute of Science (IISc), Bengaluru.
Reduce number of mutex locking in MAC->RLC direction
Currently, the scheduler locks RLC for each operation. Concretely
- for RLC status indication (to get amount of bytes per LC), it locks per LC
- for RLC indication (UL traffic), it locks for each MAC SDU of which there can
be multiple in a TB
- for RLC data req (getting data from RLC to put into a transport block), it
locks for each LCID and PDU to get.
This can have a certain overhead, because we need to re-lock RLC multiple times
instead of once (per operation above). In this MR, rework the interfaces such
that it is possible to get all information/data in a single lock-unlock cycle,
which should also help with "spikes" of scheduler times (in some scenarios, it
seems the scheduler takes longer than 0.5ms, and while it's not only locking,
re-locking might contribute), and an increase of number of UEs (e.g., instead
of doing 3 * N UEs lock cycles for getting status of SRB1, SRB2, DRB1, we do
only N times). Concretely, for each UEs RLC status indication, we lock once,
only once per LCID when filling a TB (in particular for LCID 4, on high
throughput, it might be many times), and only once per UL TB (for the common
case of UL data).
Minor fixes include the increase of the Aerial VNF thread priority, and reducing
the maximum RLC indication size to reduce excessive computation (we can't have
1MB in one TB, it is too much).
Added NTN-FR2 FDD bands defined in release 18 in Ka-band range
* NTN-FR2 bands 510, 511, 512 added. TS 38.101-5 v 18.9 defines these 3 FR2-FDD
bands for NTN operation.
* These bands are defined in Ka band range (17.3Ghz - 31Ghz).
* Tested using the added conf files using RFSIM and GEO configuration.
* There were some inconsistencies observed when testing with RFSimulator before UE
Syncs to the gNB in terms of samples being written for FR2 configurations. Once
the UE syncs, the inconsistencies disappear.
* this is the problem - UE writes incorrect number of samples and gNB complains
about getting samples in past
* The above inconsistencies were also fixed in this merge request.
* These commits solving above inconsistencies were removed from this MR and a
different MR was raised. MR with those commits: !3928.
Limit dl_DataToUL_ACK values to 15 as per standard
If min feedback time is high enough otherwise we might fail to encode/decode
pucch-Config
Assertion (enc_rval.encoded > 0 && enc_rval.encoded <= max_buffer_size * 8) failed!
In encode_cellGroupConfig() /home/francesco/openairinterface5g/openair2/LAYER2/NR_MAC_gNB/nr_radio_config.c:4029
ASN1 message encoding failed (dl-DataToUL-ACK, 18446744073709551615)!
remove xran_fh_tx_send_slot_BySymbol() and xran_fh_rx_read_slot_BySymbol()
We have separate functions ran_fh_tx_send_slot_BySymbol() and
xran_fh_rx_read_slot_BySymbol() for liteon. This MR is to remove those separate
functions.
Main author: Teodora Vladić
Co-author: Mario Joa-Ng
Changes:
xran_fh_tx_send_slot() is using if then else to handle per slot and per symbol
logic. xran_fh_rx_read_slot() is straightforward.
Testing:
- Liteon: Verified end-to-end.
- Benetel: (per slot without beam_id): Verified end-to-end.
- Microamp: (per slot with beam_id): Verified end-to-end. The branch
microamp_F_harmonize is used instead as microamp could not be run with develop
branch.
Integration `2026.w10`
* !3946 UE L1 cleanup
* !3929 UE: Fix if target cell during handover has SSB at a different offset as in source cell
* !3961 Remove Ubuntu 20 and RHEL/Rocky 8 support, increase cmake min version
* !3884 Integrate NRPPA and NGAP messages required for positioning
* !3784 CI: Create new pipeline for testing with Aerial and Jetson
* !3697 fix: issue 911 - OAI gNB hangs when AMF connection goes down
* !3914 Fix dB_fixed() function
* !3800 Add tracer to record configured events to database
* !3954 UHD streamer thread priorities in nrUE
* !3846 rename with distinct names structs and related typedefs, remove spread struct keyword
* !3958 Remove unused function arguments
Closes#911
See merge request oai/openairinterface5g!3962
Fix dB_fixed() function
- dB_fixed(0) returns 0 in develop branch;
- 0 in dB is -INF, but since we're dealing with integer variables, we'll put
20*log10(2^-15) in the output of dB_fixed() function, instead of 0.
- make all users use signed variables
fix: issue 911 - OAI gNB hangs when AMF connection goes down
Once the AMF is down, based on the AMF UE NGAP ID and RAN UE NGAP ID,
the UE associated with the AMF is found
All the contexts related to the UE are released and the timer is started
in the NGAP to look up for the SCTP association. The AMF-gNB reconnection
is made if an SCTP connection is found, also the registration of multiple
UE is triggered
These actions are based on the reference from 4.2.6 AN release Specs
TS 123 502 V16.7.0 (2021-01)
When the NG-AP signalling connection is lost due to (R)AN or AMF failure,
the AN release is performed locally by the AMF or the (R)AN as described
in the procedure flow below without using or relying on any of the signalling
shown between (R)AN and AMF. The AN release causes all UP connections of the UE
to be deactivated.
closes#911
Integrate NRPPA and NGAP messages required for positioning
This MR integrates NRPPA and NGAP messages required for positioning.
The following NGAP messages are integrated (3GPP 38.413 Version 16.0.0):
NGAP UPLINK UE ASSOCIATED NRPPA TRANSPORT
NGAP UPLINK NON UE ASSOCIATED NRPPA TRANSPORT
NGAP DOWNLINK UE ASSOCIATED NRPPA TRANSPORT
NGAP DOWNLINK NON UE ASSOCIATED NRPPA TRANSPORT
The following NRPPA messages are integrated (3GPP 38.455 Version 16.7.1):
TRP Information Request
TRP Information Response
Positioning Information Request
Positioning Information Response
Positioning activation request
Positioning Activation Response
Measurement Request
Measurement Response
This MR tests these messages via a standalone tester nr-cu-nrppa-test that
connects to the AMF to perform NGAP enc/dec and NRPPA enc/dec
Core Network:
To pull the docker images:
docker pull oaisoftwarealliance/ims:latest
docker pull oaisoftwarealliance/oai-amf:develop
docker pull oaisoftwarealliance/oai-nrf:develop
docker pull oaisoftwarealliance/oai-smf:develop
docker pull oaisoftwarealliance/oai-udr:develop
docker pull oaisoftwarealliance/oai-upf:develop
docker pull oaisoftwarealliance/oai-udm:develop
docker pull oaisoftwarealliance/oai-ausf:develop
docker pull oaisoftwarealliance/oai-lmf:develop
openairinterface5g$ cd doc/tutorial_resources/oai-cn5g
To deploy:
openairinterface5g/doc/tutorial_resources/oai-cn5g$ docker compose -f docker-compose-positioning.yaml up -d
To undeploy:
openairinterface5g/doc/tutorial_resources/oai-cn5g$ docker compose -f docker-compose-positioning.yaml down -t 0
RAN:
To compile:
openairinterface5g$ mkdir build
openairinterface5g$ cd build
openairinterface5g/build$ cmake .. -GNinja
openairinterface5g/build$ ninja nr-cu-nrppa-test
To run:
openairinterface5g/build$ LD_LIBRARY_PATH=. ./tests/nr-cu-nrppa/nr-cu-nrppa-test -O ../tests/nr-cu-nrppa/nr-nrppa-test.conf
To initiate positioning procedure:
openairinterface5g$ cd doc/tutorial_resources/positioning/
openairinterface5g/doc/tutorial_resources/positioning$ curl --http2-prior-knowledge -H "Content-Type: application/json" -d "@InputData.json" -X POST http://192.168.70.141:8080/nlmf-loc/v1/determine-location
Remove Ubuntu 20 and RHEL/Rocky 8 support, increase cmake min version
Ubuntu 20 is EOL [1]. This was the version with the lowest CMake version, so
we can increment the minimum CMake version to 3.19 as well. Increasing the
minimum version will in particular help with the integration of CUDA (updates
in 3.17 and 3.18), the current 3.19 brings better support for apple silicon.
Some minor CMake updates (removing superfluous files and dependencies).
[1] https://ubuntu.com/blog/ubuntu-20-04-lts-end-of-life-standard-support-is-coming-to-an-end-heres-how-to-prepare
UE: Fix if target cell during handover has SSB at a different offset as in source cell
These changes fixed these observed issues:
- If target cell has a different SSB position compared to source cell during
ho - sync was not successful.
- RAR does not get decoded if SSB position has changed on the target cell
compared to source cell.
Configure CSI-RS according to beam_id used by UE
This MR is to configure CSI-RS according to beam_id used by UE and
reconfigure upon beam change.
It has been tested with RFSIM, Liteon and Microamp under multiple beams.
CI: rework log analysis to simplify and allow new use cases
The CI has some log analysis, but it is unmaintainable (huge functions
that mix eNB/gNB or lteUE/nrUE, are not tested, most of it is not used
or useful...) or limited to specific use cases (the timing-phytest time
analysis is hardcoded to source builds instead of also handling analysis
when running from docker images). This MR reimplements both functions.
For the log analysis, the CI team decided to throw away the old
analysis, and reimplement a mechanism that checks the couple of things
we care for.
- Allow to analyze phy-test timing analysis from docker files, and add a
unit test
- Rework existing log analysis to remove useless checks, and make it
more composable
* The undeployment steps (Undeploy_Object(), Terminate_eNB()) take an
<analysis> XML object which then either has a <services> subelement
with check that are whitespace delimited (similar to how other xml
task steps have <services>). For checks that contain whitespace,
they can use <service> (singular) that encodes a single check, such
that e.g., arguments could include spaces.
* Each check is of form service=check[=arguments], where service is
the docker services, check is a checking function (implemented as a
class with run(file, options) function inside cls_loganalysis.py,
and options arguments after the second = that is to be read by run()
(basically, options will contain arguments that can be freeform)
* these definitions can occur multiple times, e.g., it could be
serviceA=Check1 and serviceA=Check2=Args and it will execute both
Check1 and Check2
* if a service is declared, it will execute alse the Default check
which currently checks for an assertion
* Implemented (and inspired from the existing CI analysis) are:
- Default check to check for assertions (will be extended, to e.g.,
address/undefined behavior sanitizer analysis)
- RetxCheck: retransmission check as used in the CI
- LastLineContains to check the last line containes a specific
string
- ContainsString to check a specific string appears in logs
- EndsWithBye: check that towards the end (but not necessarily the
last line), there is a Bye. string (a workaround since we don't
always terminate with 0)
- There is a plan to use return codes after stopping in docker, but most
executables do not end with 0 most of the time, such that we needed to
abandon this plan.
- Additional fixes (see commit messages) and delete unused code
GPU Channel Simulation: nr_dlsim/nr_ulsim Integration + CI Test
This MR is a follow-up to !3886 (merged) and extends CUDA-based channel
simulation support to nr_dlsim and nr_ulsim, together with the
corresponding CI tests.
The MR incorporates:
- Cherry-picked commits e0c204f7 and 5f344876 from !3588
- Integration of new CI physim tests using GPU-accelerated channel
simulation in nr_dlsim and nr_ulsim tests, see commit c727b3bb
New CI job: RAN-Channel-Simulation
https://jenkins-oai.eurecom.fr/job/RAN-Channel-Simulation/
Fix compilation error:
/oai-ran/openair1/SIMULATION/NR_PHY/dlsim.c:932:42: error: variable 'h_channel_coeffs' set but not used [-Werror,-Wunused-but-set-variable]
932 | float *h_channel_coeffs = NULL;
| ^
- Introduce usage of the -f option in ulsim to allow enabling specific
feature flags at runtime.
- Add support for the "cuda" flag to enable CUDA channel simulation when
compiled with CUDA support. If an unsupported flag is provided, nr_ulsim
reports an error.
- Replace previous handling of -f with a generic feature flag option.
- Add support for the "cuda" flag to enable CUDA channel simulation when
compiled with ENABLE_CUDA.
- Remove unused SCGroupConfig file handling (scg_fd) and related code.
- Clean up deprecated code and variables associated with SCG reading - not
required anymore after b232be94ed
Fix handling of IPv4v6 PDU sessions
The code previously checked that the supplied PDU sessions's type is
exactly what we requested. However, at least OAI 5GC will only give us
an IPv4 PDU session if we request IPv4v6 (so the check would fail).
Extend the validation to either check exact match, or, if IPv4v6
requested, that it is either IPv4 or IPv6.
fix: removed the nssai_sd parameter in the ue.conf file
Following the tutorial in the RF simulator, the PDU session cannot
be established because the Slice Differentiator to request(nssai_sd)
parameter in the ue.conf file is 1(integer) but in the documentation
the default value of the nssai_sd is 0xFFFFF(meaning "no SD")
Now the nssai_sd parameter is removed in the ue.conf to establish the
PDU session.
NR UE: correctly compute writeTimestamp for SCS > 30 kHz with rf-simulator
Contains also two minor cleanups for nr-ue.c:
- make fp point to constant NR_DL_FRAME_PARMS where possible
- use c16_t type for I/Q sample arrays
print better message for rsrp: invalid doesn't mean it is not measured
print better message for rsrp: invalid doesn't mean it is not measured,
it means it is out of usable range
NR UE: fix PRACH k1 calculation at MAC when handover
The k1 for PRACH calculation in config_common_ue() should be the same as in
config_common_ue_sa(), otherwise k1 is wrong when handover to target cell if
msg1-FDM not 0 in reconfigurationWithSync.
Verified with 3rd-party gNB.
gNB: Reset NDI only after usage in case of disable HARQ
Solves this warnings seen in the UE trace:
NDI indicates re-transmission but computed TBS 3968 doesn't match with what previously stored 3368
Issue happens only if feature disable_harq is enabled. GNB resets the harq
process (including NDI) as PUCCH will not be sent for this harq process, but
before the harq process is used in DCI payload preparation.
Fix is to reset the harq process after harq process in case of no PUCCH.
Fail early if configuration module can not initialize properly
In the case that the config module cannot load the driver for libconfig or yaml,
currently, there might be a cascade of errors that are difficult for users to
understand. For instance (partially redacted for clarity):
[CONFIG] Error calling dlopen(libparams_libconfig.so): libparams_libconfig.so: cannot open shared object file: No such file or directory
[CONFIG] config module "libconfig" couldn't be loaded
[CONFIG] config_get, section log_config skipped, config module not properly initialized
[LOG] init aborted, configuration couldn't be performed
[CONFIG] config_get, section (null) skipped, config module not properly initialized
[CONFIG] /home/francesco/openairinterface5g/common/config/config_userapi.c 68 nfapi has no processed integer availablle
[CONFIG] config_get, section (null) skipped, config module not properly initialized
Assertion (get_softmodem_params()->default_pdu_session_id == -1) failed!
In get_common_options() /home/francesco/openairinterface5g/executables/softmodem-common.c:161
Use uicc0.pdu_sessions.[0].id to change the requested PDU session ID (is 0)
Here, the error is the missing shared object, but a user is more likely to look
at the last error instead of the first.
This commit addresses it by checking early for CONFIG_ISFLAGSET(CONFIG_ABORT),
and stopping if it is set. Additionally changes include making functions static,
removing late CONFIG_ISFLAGSET() checks, and the CONFIG_ISFLAGSET() in
load_configmodule(), because at that time "uniqCfg" is not set yet and thus does
not do anything (this is likely a regression of an earlier cleanup).
See-also: f50d5f5a ("make multiple config instead of one implicit global")
[FHI72] Remove support for xran E release
All the use cases we tested with E release are working end-to-end with F release.
The near future plan is to support K release which is ongoing in the MR !3444.
Integration: `2026.w07`
* !3899 Solving issues caused by invalid RRC configuration
* !3905 Add undocumented Aerial ERROR.indication vendor specific error codes
* !3896 Add fallbacks for ARMv8a to make it compile
* !3734 vrtsim: add CIR DB playback with CLI flags
* !3886 Integrate GPU-Accelerated Channel Simulation + CI Test Pipeline
* !3907 RRC QoS refactor: PDU Session Modify support, SDAP fixes, and code improvements
* !3891 Fix for split 7.2 DU configurations including DU & RU ethernet addresses
* !3913 Remove VCD signal dumper from NR code
* !3783 RRC: Multi-cell handling architecture
* !3916 CI: Rename RAN-SA-2x2-Module-CN5G pipeline
* !3922 Fix and update tracy tag to v0.13.1
* !3917 Fix SRS power computation
* !3915 Cleanup Cmake: remove some double compilation
* !3883 Improvements in handling beamforming inputs
* !3906 fix(ci): remove git reset command from Jenkinsfile
* !3894 Reimplement BladeRF radio driver, make it work for 5G
Closes#845
See merge request oai/openairinterface5g!3908
RAN-SA-2x2-Module-CN5G performs tests not only with 2x2 but also with a 4x4 MIMO
configuration. The pipeline name has been generalized to RAN-SA-Multi-Antenna-CN5G
to cover multiple antenna configurations.
For now, test in the following configuration:
- 16 parallel channels
- channel length of 32 and 128
- with 61440 and 122880 samples
- 12 trials per each test (due to CUDA kernel loading delay in first iterations)
- multiple MIMO configurations: 2TX - 2/4/8/32 RX, 2/4/8/32 TX - 2RX
Integration `2026.w06`
* !3690 [FHI72] Support large DU delay profiles in the xran F, and include ProtO-RU emulator designed to run 7.2 with an USRP
* !3887 Update RHEL UBI image source to `registry.redhat.io`
* !3882 Change Aerial to pack directly in nvIPC message buffer
* !3895 CI: Ensure OAI-FLEXRIC-RAN-Integration-Test pipeline always uses latest commit for non-MR builds
* !3873 Ensure noise power is non-zero
* !3889 Enable imscope for split7.2
* !3801 Resolve "7.2 split ru_thread slot miss
* !3898 Fix config_libconfig_get for string
* !3876 Removing the duplicate loop in ULSCH power computation
Closes#972
See merge request oai/openairinterface5g!3888
Removing the duplicate loop in ULSCH power computation
- Removing the duplicate loop in ULSCH power computation.
- The logs obtained are as follows:
[NR_MAC] UE dc65: 134.11 Generating RA-Msg2 DCI, RA RNTI 0x113, state 1, preamble_index(RAPID) 42, timing_offset = 5 (estimated distance 195.3 [m])
[PHY] PUSCH not detected in 134.17 (307,302,50)
[PHY] PUSCH not detected in 134.17 (311,309,50)
[NR_MAC] 135 4: RA RNTI 41c5 CC_id 0 Scheduling retransmission of Msg3 in (135,8)
[NR_MAC] 135 4: RA RNTI a3cc CC_id 0 Scheduling retransmission of Msg3 in (135,8)
[PHY] PUSCH not detected in 134.18 (310,312,50)
[NR_MAC] 135 5: RA RNTI dc65 CC_id 0 Scheduling retransmission of Msg3 in (135,9)
[PHY] PUSCH not detected in 135.8 (309,309,50)
[PHY] PUSCH not detected in 135.8 (313,308,50)
[NR_MAC] 13515: RA RNTI 41c5 CC_id 0 Scheduling retransmission of Msg3 in (135,19)
[NR_MAC] 13515: RA RNTI a3cc CC_id 0 Scheduling retransmission of Msg3 in (135,19)
[PHY] PUSCH not detected in 135.9 (308,300,50)
[NR_MAC] 136 4: RA RNTI dc65 CC_id 0 Scheduling retransmission of Msg3 in (136,8)
[NR_PHY] [RAPROC] 135.19 Initiating RA procedure with preamble 6, energy 19.1 dB (I0 63, thres 120), delay 4 start symbol 0 freq index 0
[PHY] PUSCH not detected in 135.19 (310,310,50)
[PHY] PUSCH not detected in 135.19 (312,310,50)
[NR_MAC] 135.19 UE RA-RNTI 010b TC-RNTI 0888: initiating RA procedure
[NR_MAC] UE 0888: Sync beam index 0
[NR_MAC] UE 0888: Msg3 scheduled at 136.17 (136.10 TDA 2) start 0 RBs 8
[NR_MAC] UE 0888: 136.10 Generating RA-Msg2 DCI, RA RNTI 0x10b, state 1, preamble_index(RAPID) 6, timing_offset = 4 (estimated distance 156.3 [m])
- For the same scenario, develop branch gives exactly the same result. When
there is no PUSCH, the power measured for ULSCH and noise are practically
the same. Furthermore, the value in develop branch is also approximately
310 for the same noise level.
Ensure noise power is non-zero
Prior to this commit, noise power estimation could be zero because of a
call to clearArray() in gNB_I0_measurements(). This is problematic, as
this can lead to a noise power of 0 if all symbols in a RB are used,
which in turn leads to a spike in SNR.
To avoid this, use an intermediate array to store noise power, and only
update n0_subband_power if not all RBs are used (i.e., we can detect
noise power). Further, use an exponential moving average to smoothen
noise estimation.
Fixes: fb4235fd ("changes in PUCCH0 SNR measurement, testing for
PUCCH power control")
Update RHEL UBI image source to registry.redhat.io
This merge request updates the RHEL UBI base image source to registry.redhat.io,
aligning with Red Hat’s supported container registry and avoiding potential
access or availability issues with registry.access.redhat.com.
[FHI72] Support large DU delay profiles in the xran F, and include ProtO-RU
emulator designed to run 7.2 with an USRP
This MR does the following:
- we patch xRAN to support large DU delay profiles (i.e., T1a/Ta4 values larger
than a TTI)
- we update the FHI72 docs to introduce ProtO-RU, a software implementation of a
Split-7.2 O-RU with large delay profile
- we provide an example configuration for ProtO-RU
Details on the xRAN patch:
In xRAN, it appears that T1a/Ta4 values are assumed to be within a TTI. When
T1a/Ta4 values larger than a TTI are used, this causes two issues:
(1) C-plane packets to be generated later than expected, and
(2) oai_xran_fh_rx_callback() receives the wrong timing information, resulting
in potentially empty/stale PUSCH/PRACH data to be read.
In the xRAN patch, we modify xRAN to make it handle large T1a/Ta4 values properly.
The changes include:
(1) three additional variables in offset_num_slots_* (xran_dev.h),
(2) modify "xran_timing_create_cbs" and "xran_timer_arm_for_deadline"
(xran_cb_proc.c), and
(3) revise "tx_cp_dl_cb" and "tx_cp_ul_cb" (xran_main.c).
Additionally, we add additional guard conditions to prevent xran_tx_proc.c from
sending U-plane packets when it is not a downlink slot.
NR UE: add support for multiple RF frontends
This MR adds basic support for multiple RF-frontends at the UE.
There are multiple reasons why we might want this:
1. There might be different antennas needed for different bands (e.g. NTN or
TN antennas). These antennas might be connected to different RF-frontends.
In case of Handover, the UE needs to dynamically switch between these
RF-frontends.
2. Each rf-simulator connection carries baseband I/Q samples. To be able to
perform a handover between two cells at different frequencies, there must
be two rf-simulator connections, as the baseband channels should not
interfere and thus cannot simply be added.
3. When we want to support multiple UE simulation within one instance of
nr-uesoftmodem, and allow multiple cells and probably even handover between
these cells, we need either:
1. dedicated RF-frontends for each simulated UE, or
2. dedicated RF-frontends for each connected cell and dynamically assign
simulated UEs accordingly.
This MR implements what is needed for 1., 2. and 3.1.
Fix FFT size for xran_fh_tx_send_slot_BySymbol() and xran_fh_rx_read_slot_BySymbol()
This MR handles
- Fix FFT size for xran_fh_tx_send_slot_BySymbol() and
xran_fh_rx_read_slot_BySymbol() (!3809)
- Fix E release build
Create Debian and Redhat packages with CPack
Use CPack in CMakelists in order to create packages, creation command is
available in build_oai script and options description is available in
packages.md
NGAP: improve error handling in RRCReconfiguration from Handover Command decoding
This MR refactors doRRCReconfiguration_from_HandoverCommand for consistency and
safety, and enables NGAP Handover Cancel encoding/decoding.
- Refactored doRRCReconfiguration_from_HandoverCommand function:
- Changed signature to return byte_array_t instead of taking a buffer parameter
- Prevents buffer overflow by auto-sizing memory with uper_encode_to_new_buffer
- Input validation
- HandoverCommand structure validation
- Error handling and cleanup for encode/decode failures
- ASN.1 structure cleanup on all error paths
- Updated caller in rrc_gNB_NGAP.c: use new byte_array_t return signature,
added buffer cleanup with free_byte_array(), sends Handover Cancel to AMF on
decoding failure (source gNB)
- Improved error logging
- NGAP Handover Cancel encoding/decoding support
- Added missing Handover Cancel ack case handler for
NGAP_ProcedureCode_id_HandoverCancel in ngap_gNB_decode_initiating_message()
to decode and log incoming Handover Cancel Ack message
- Added NGAP_ProcedureCode_id_HandoverCancel to the list of supported
initiating message procedure codes in ngap_gNB_encode_initiating() allowing
the gNB to encode and send Handover Cancel messages
Note: The Handover Cancel procedure is already implemented elsewhere in the NGAP
stack; these changes complete support by ensuring the procedure code is
recognized in both encoder and decoder.
Closes#1043
UE support to send CSI report on PUSCH
Earlier work on UCI on PUSCH implemented only ACK/NACK. This MR extends that
to send CSI report too.
This branch is verified with MATLAB implementation for multiplexing CSI part 1
and part 2 on PUSCH. It is also verified with srsRAN gNB which successfully
decodes CSI part 1 on PUSCH.
Fix RSRP overflow
If UE L1 measure an RSRP = 0 it would report to L2 and RSRP value of -INT_MAX
dBm causing overflow in the qsort to determine the best RSRPs
Clear memory in shm_td_iq_channel after RX
Clear memory in shm_td_iq_channel after RX. This prevents the IQ
from being read twice. This can happen if the application crashes
and will keep the other side reading historical IQ samples.
Update vrtsim timing job thread
List of changes:
- avoid calculating accumulated rounding error by calculating absolute
sample index based on CLOCK_REALTIME every time.
- use threadCreate instead of plain pthread_create which assigns a unique
thread name and simplifies debugging
Integration `2026.w04`
* !3787 CI: disable aerial x86 build pipeline
* !3820 Integrate F1AP messages required for NRPPa
* !3789 fix A3 event configuration
* !3861 add a csv T tracer
* !3669 NR UE: add neighboring cell measurements and measurement report of event A3
* !3866 nr-softmodem: ensure RU is ready before L1 init in NFAPI PNF mode
* !3402 Test FDM PRACH in CI
* !3852 Cleanup nr_slot_fep_ul
* !3782 Improvements to support CSET0 multiplexing pattern 3 for FR2
* !3862 Check for PDSCH overlapping CORESET during RA
* !3430 NR gNB handling TCI state indication for beam switching
* !3872 Fix compilation issues with vrtsim taps client
* !3687 Standardize Documentation Formatting and Navigation for MkDocs
Closes#705
See merge request oai/openairinterface5g!3867
Standardize Documentation Formatting and Navigation for MkDocs
This merge request improves and organizes the documentation to align with MkDocs
requirements. The following guidelines have been applied:
Guidelines Followed
Fix Broken Links and Paths
- Updated all links with proper paths to ensure correct rendering in MkDocs.
Correct Headings
- Removed multiple H1 headings (#).
- Subheadings use H2–H6 (## to ######) for consistent structure.
Proper URL Formatting
- All URLs now follow standard Markdown syntax,
e.g., [Example](https://www.example.com).
Proper Syntax
- Tables, lists, and code blocks use standard Markdown formatting to ensure
correct rendering.
Remove HTML Formatting
- Removed unnecessary inline HTML styling from documents, retaining only the
content.
Notes and Warnings
- Converted notes and warnings into blockquote syntax (>).
This ensures the documentation is properly structured, consistent, and
MkDocs-friendly.
NR gNB handling TCI state indication for beam switching
This MR implements the procedure to send in DLSCH MAC-CE for TCI state
indication to UE
- if new beam is reported via SSB RSRP, gNB allocates MAC-CE with TCI
indication
- DLSCH is scheduled to be transmitted with priority
- a timer is started when receiving ACK according to the delay mandated
by standard (8.10.3 of 38.133)
- at timer expiry the gNB switches beam
Check for PDSCH overlapping CORESET during RA
CORESET 0 is configured in the configuration file by
'initialDLBWPcontrolResourceSetZero' and PDSCH TDA list is configured based on
the current BWP size.
It may happen that the user configures a 2 symbol CORESET 0 for a BWP >= 48 PRBs
(which is a valid 3GPP configuration) but in function 'nr_rrc_config_dl_tda'
this scenario is not taken in account causing an overlap between PDSCH and PDCCH
symbols during RA.
This leads to very unreliable Msg2 and Msg4 decoding at the UE, but from time to
time it succeeds, which becomes hard to identify this issue.
closes#705
Cleanup nr_slot_fep_ul
Rename nr_slot_fep_ul to nr_symbol_fep_ul to relfect its function
Simplify logic so that the function does not require RU context and
the implementation is not dependent on the implementation of RU buffer
management.
This makes the function easier to understand and moves the responsibility
to set the correct buffer offset on the caller.
nr-softmodem: ensure RU is ready before L1 init in NFAPI PNF mode
PROBLEM: In PNF mode, L1 is started from nfapi_pnf.c without verifying RU
readiness. The only gate is config_sync_var, but nr_softmodem.c sets this before
the RU (e.g., FHI-72) is actually started. As a result, START_REQUEST can
trigger L1 init while the RU is not yet ready -- this is an issue when using
FHI72 with DPDK BBDEV, where a pre-mature L1 init will crash the entire program
as DPDK BBDEV depends on xRAN's DPDK EAL. Note that this issue is more like a
"race" condition, so it may not always manifest, and happens at random.
FIX: Perform RU readiness checks before setting config_sync_var in NFAPI PNF mode.
This aligns PNF behavior with other modes and prevents L1 from starting before the
RU is operational.
NR UE: add neighboring cell measurements and measurement report of event A3
This is a rework of MR !2385 (closed), the goal is to add neighboring cell
measurements and measurement report of event A3 for NR UE.
This MR was tested with:
- 3rd-party gNB
- 2 OAI-gNB-DUs
The neighboring cell measurements and measurement report of event A3 for OAI-UE
are working as expected.
fix A3 event configuration
See commit message for more information.
As a reference, for comparison purpose, PCAPs and TXT files for various tests
done in develop and in this MR are available in the MR description.
Integrate F1AP messages required for NRPPa
This MR is one of the several MRs that will follow in the integration of NRPPa
protocol (!2437) required for positioning in 5G NR. We specifically introduce
encoding and decoding of several F1AP messages including unit tests for
verification in this MR.
The details of the F1AP messages introduced here can be seen below:
- POSITIONING INFORMATION REQUEST
- POSITIONING INFORMATION RESPONSE
- Supported optional field: SRS Configuration
- POSITIONING INFORMATION FAILURE
- POSITIONING INFORMATION UPDATE
- Supported optional field: SRS Configuration
- POSITIONING ACTIVATION REQUEST
- POSITIONING ACTIVATION RESPONSE
- POSITIONING ACTIVATION FAILURE
- POSITIONING DEACTIVATION
- TRP INFORMATION REQUEST
- TRP INFORMATION RESPONSE
- Supported : NR PCI, NG-RAN CGI, NR ARFCN, Geogarphical Coordinates
- TRP INFORMATION FAILURE
- POSITIONING MEASUREMENT REQUEST
- Supported optional field: SRS Configuration
- POSITIONING MEASUREMENT RESPONSE
- POSITIONING MEASUREMENT FAILURE
- POSITIONING MEASUREMENT REPORT
- POSITIONING MEASUREMENT ABORT
- POSITIONING MEASUREMENT FAILURE INDICATION
- POSITIONING MEASUREMENT UPDATE
- Supported optional field: SRS Configuration
The reference to these messages can be found in 3GPP 38.473 v16.21.0
CI: disable aerial x86 build pipeline
We use Aerial exclusively on ARM/gracehopper, so no need to build it on
x86. On this occasion, rename the "kind" (ID which images to build) to
x86 for clarity and align with the other "kinds" (build_cross_arm,
native_armv9, ...).
Integration: `2026.w02`
* !3828 L2 UE files code cleanup for static functions
* !3839 Couple rfsim fixes
* !3835 Correctly include cblas include directories for RHEL
* !3840 Fix missing return statements in SIB1 TDA validation
* !3836 move NTN UE L1 functions to a new file
* !3793 CI: Remove redundant Jenkinsfiles
* !3770 RRC UE: Implement proper NH chain synchronization for RRC Reestablishment
* !3843 fix(documentation): issue 1042
* !3842 Remove unused cmake_targets files
* !3832 Remove global iq_txshift and iq_rxrescale
* !3847 Minor CI and nr_ulsim reporting adjustments
* !3838 NR NGAP (N2HO) : Fix Time UE Stayed in Cell IE type and calculation
* !3677 Support prach with start symbol of PRACH not at symbol 0
Closes#1042 and #857
See merge request oai/openairinterface5g!3841
NR NGAP (N2HO) : Fix Time UE Stayed in Cell IE type and calculation
According to 3GPP TS 38.413, the 'Time UE Stayed in Cell' IE is an
integer ranging from 0 to 4095. This patch updates the data structure
to reflect the correct bit width and implements the dynamic calculation
based on the UE's residence time.
- Change time_in_cell from long to uint16_t in ngap_messages_types.h.
- Replace dummy value with real-time calculation in rrc_gNB_NGAP.c.
- Implement a ceiling of 4095 to comply with the 12-bit protocol limit.
Ref: 3GPP TS 38.413 Section 9.3.1.97
