Refactor DLSCH scheduler
Refactor the DLSCH post processor similarly to what has been done in
!3521 with the goal of saving an additional iteration through all UEs,
hopefully making the DLSCH scheduler faster.
It further includes changes to make working with and debugging multi-UE
operation easier:
- add some measurements in L1 (for total TX/RX time)
- a new option MACRLCs.[0].stats_max_ue to limit the number of UEs in
the periodic output (default: 8, 0=disable)
- avoid stack overflow in the MAC
- fix the writing of stats to nrMAC_stats.log and nrL1_stats.log when
the written output reduces by truncating the files
- avoid to schedule retransmission with 0 RBs.
Refactor PRACH handling at the gNB
- Remove race conditions by correctly setting mutexes
- Fix a bug when having multiple RACH occasions
- Reduce memory footprint by removing global memory, which should also
fix potential memory data races in FHI 7.2
- Additional fixes, see commit messages
a bit difficult to understand: sl_ahead=6 => we systematically miss the
rach detection in the scheduler because the scheduler runs more than 6
slots ahead the rx slot processing (here > 11 slots because 6 (DL and UL
slots) + 4 (RU_RX_SLOT_DEPTH, so UL only))
so, reducing sl_ahead works better than large sl_ahead because the idea
behind is: the scheduler of slot+sl_ahead will never create work to do
in a UL slot before slot+sl_ahead+X (as minimum k2 is X, in the 24PRB CI
test: 6)
The gNB will stop the periodical logging of UEs in MAC Info level after
a configurable number of UEs have been printed, by default 8.
Set it to 17 in some CI tests to ensure we still get all UEs for the
time being, as the CI might depend on this.
Improve handling of selection of RSRP/SINR report via configuration file
In current develop, the selection of SSB or CRI RSRP depends on the
do_CSIRS flag being activated. That's not wanted. CRI report for now it
is never handled, while we need SSB RSRP report for beam switching
regardless of CSI-RS configuration.
- Add XML pipeline for N2 handover testing
- Add Docker compose for two monolithic gNBs
- Features:
* Two monolithic gNBs (gNB1, gNB2) with proper CU+DU parameters
* Gradual attenuation control using RC4DAT attenuator (5s duration)
* N2 handover sequence: gNB1 → gNB2 → gNB1
* Proper channel mapping: ch1-2 for gNB1, ch3-4 for gNB2
* Telnet server configuration for CI commands
* Handover-specific neighbor configuration
* Clean test state management with attenuator reset
Update based on !3645
Note: For some test configurations we still need to provide
ra_ResponseWindow, for more details, check commit message of
41d14b571c
Update cuBB image to cubb-build:25-2.1_srs-ul-heavy (release 25-2.1 with
changes in the L1 config to test heavy ul)
Co-authored-by: Reem Bahsoun <reem.bahsoun@openairinterface.org>
Add OAIUE longrun pipeline
Add a new XML file for OAIUE longrun.
- Test description:
* 40 MHz BW, n78
* gNB with USRP N310, UE with USRP N310
* CN deployed on OC
- Test duration: 1 hour
- Test scenario: 3x DL 10 min test (20 Mbps) + 3x UL 10 min test (5
Mbps)
Code cleanup (SRS, config files and more)
- Remove deprecated elements from some configuration files (also closes#997)
- Improve SRS code with a better separation between common code and gNB/UE code
- Other minor compilation improvements
The pipeline is using the already existing conf files
for the source/target gNB CUs/DUs.
For the sake of simplicity, neighbour-config.conf has
been rewritten and simplified in this commit, then
adopted in this pipeline. The file was not used before.
CI: Creation of F1 Handover pipeline
In this MR we are modifying/adding all the required files (.xml, .conf,
.yml) in order to create a pipeline on Jenkins that allows us to test
OTA F1 handover.
Reworking BWP configuration
This MR reworks the configuration via fail of additional BWPs. Moreover, it
allows for a single BWP to be configured for a given UE at a given time (BWP
switch possible only via reconfiguration). It also reworks PTRS configuration
for consistency with the BWP one.
Fixes and updates for UL scheduling, notably DSUUU
Fix a number of problems that stem from !3521, notably regarding Msg3
scheduling, retransmissions in "UL-heavy" TDD scenarios, and BSR
handling. Modify a CI test to run a UL-heavy TDD scenario, and add
documentation for UL-heavy TDD scenarios.
The parameter is either set to 10 (the default, so not necessary), or to
0 forcing the gNB to schedule the UE all the time, which is only
necessary in specific scenario, and here simply wrong.
Refactor ULSCH scheduler towards more TDD pattern flexibility
Refactors ULSCH scheduler, notably to support "UL-heavy" TDD patterns,
e.g., DSUUU. Also allows to run TDD pattern2 with UL slots, which was a
limitation in the previous code.
Increase the number of aggregration level candidates. Since we have many
UEs with concurrent traffic in that pipeline, we should ensure that we
can allocate many DCIs to not waste resources (e.g., not all RBs used
because could not find DCIs for specific UEs).
Make Amarisoft UE sim a RedCap UE
Change Amarisoft UE configuration and gNB of the AW2S pipeline to
be/handle RedCap UEs.
The UE should only connect if the gNB handles RedCap UEs. In the logs,
we should see
[MAC] UE with RNTI 3725 is RedCap
which we check for the first two UEs (one normal UE/absence of this
message, one RedCap UE/presence of this message).
Add a CU-UP load tester and improve GTP performance
This adds a simple tester program for the CU-UP. It sets up a number of
UEs/bearers in the CU-UP via the E1 interface, then streams data in
downlink/uplink (as seen by the CU-UP). More information is available in
tests/nr-cuup/README.md.
Includes some fixes to properly verify that SCTP is installed, and use
"the right cmake way" to use it in cmake code (see commit for details).
Remove these F1-C port numbers. The configuration is not actually
applied, and the default F1-C port number 38472 (see F1AP_PORT_NUMBER)
is hardcoded in the F1 module.
For the moment, I leave the configuration option, in case we want to
allow to configure the port numbers later).
Now that we reliably receive SIB19, we can set the ntn-UlSyncValidityDuration-r17 to a sane value
and thus make sure that the UE always has up-to-date SIB19 information.
Since the parent commit, the ra_ResponseWindow will be chosen
automatically. Correspondingly, remove most ra_ResponseWindow options
from configuration files in the repository.
One problem in some mu=1 configs is that the ra_ResponseWindow=4 (10
slots), which might be overly restrictive if the L1 slot ahead is
somewhat close to 10 (e.g., 6), in which case we might not be always
able to allocate Msg2 in time.
A notable exception here is gnb-vnf.sa.band66.u0.25prb.nfapi.conf, in
which we still provide it (1) since it uses a non-standard configuration
of a ra_ResponseWindow longer than 10ms (see also issue #916 for more
information) and (2) as an example.
Fix Dedicated BWPs
- Improve SearchSpace selection
- Improve CORESET selection
- Fix fill 'initialDownlinkBWP->pdsch_Config' when there are
DedicatedBWPs
* This fixes the reported 'RSRP = 0' issue when the UE is in the
InitialBWP and we have DedicatedBWPs configured
- Add a 'common' type SearchSpace in the NR_BWP_DownlinkDedicated IE for
DedicatedBWPs
- Fix hardcoded 'controlResourceSetId' by making it dynamic
- Remove 'searchspaceid' from 'verify_agg_levels' function because it
was used only for LOG
- CI: Add DedicatedBWP to '40 MHz TDD F1+E1 SA' in
'RAN-SA-B200-Module-SABOX-Container'
Following frequency change in the pipeline, we observed degraded UL channel
conditions resulting in low UL throughput. Increasing attenuation on the gNB
side was found to mitigate this issue by improving UL channel quality
and reducing UL noise power.
Increase tested UL and DL bitrates in OAIUE pipeline.
Jaroslava Fiedlerova