We use Aerial exclusively on ARM/gracehopper, so no need to build it on
x86. On this occasion, rename the "kind" (ID which images to build) to
x86 for clarity and align with the other "kinds" (build_cross_arm,
native_armv9, ...).
Integration: `2026.w03`
* !3818 Update threadCreate
* !3845 Update physim timing thresholds in gNB-N300-Timing-Phytest-LDPC
* !3849 Make gpd config utility global
* !3812 Fix reestablishment after handover
* !3826 Define speed of light
* !3799 Fix for threadpool abort function
* !3791 fix array lenght errors, k variable wrapping threshold. Make the code smaller and more efficient
* !3718 Introduce SRS physical simulator and improvements
* !3857 Fix bug "no AMF for UE"
* !3858 remove function decode_cellGroupConfig
* !3668 Support beam index for LiteON FR2 RU that needs per symbol section in CP packets
* !3844 CI: Remove testcase ids from XML files
* !3620 update multi-RU 7.2 documentation for DAS scenario
* !3788 Fix handover documentation and configuration files for event configuration
See merge request oai/openairinterface5g!3854
Support beam index for LiteON FR2 RU that needs per symbol section in CP packets
This branch supports beam index for LiteOn FR2 RU and others. It adds
the support of beam index for LiteOn RU that uses per-symbol CP packet
and is a sequel of MR !3605 (merged) that supports beam index for RU
that uses per-slot CP packets.
A. To support LiteOn FR2 RU, the following are needed.
a. Per symbol beamforming. Need separate section for each symbol on CP packet.
b. Handle these two bugs:
- section ID on UP packet is set wrongly to 13 for all sections
- prach eAxC offset starts from 0 instead of from last antenna port
number used by other channels.
B. Implementation
a. set fh_config->RunSlotPrbMapBySymbolEnable based on the setting in the configuration file
- if disable, the existing per-slot scheme is run on xran.
- if enable, RunSlotPrbMapBySymbolEnable mode is on in xran so that xran
will generate PrbElm per symbol (aka total of 14)and perform
per-symbol processing on the corresponding PrbElm.
b. set fh_config->LiteOnIgnoreUPSectionIdEnable based on the setting in
the configuration file if enable, handle 2 "features" of Liteon:
- To handle the section_id = 13 issue on Liteon where section ID is set
wrongly to 13 for all sections
- To handle the prach eAxC offset issue on Liteon where it starts from 0
instead of from the end of last antenna port number
c. if fh_config->RunSlotPrbMapBySymbolEnable, OAI FHI
- invoke xran_fh_rx_read_slot_BySymbol() instead of xran_fh_rx_read_slot()
- invoke xran_fh_tx_send_slot_BySymbol() instead of xran_fh_tx_send_slot()
C. Testing
a. Command to test benetel RU
sudo LD_LIBRARY_PATH=.:$DPDK_INST/lib/x86_64-linux-gnu/ ./nr-softmodem -O /etc/ran_development/CONFs/gnb.sa.band77.273prb.fhi72.4x4-benetel550_c0.conf --thread-pool 21,22,23,24,25,26,27,28
Results:
iperf UDP uplink
[ 5] 0.00-10.22 sec 87.3 MBytes 71.6 Mbits/sec 0.100 ms 370/63081 (0.59%) receiver
iperf UDP downlink
[ 5] 0.00-10.00 sec 796 MBytes 668 Mbits/sec 0.017 ms 1824/586404 (0.31%) receiver
b. Command to test LiteOn FR2 RU
sudo LD_LIBRARY_PATH=.:$DPDK_INST/lib/x86_64-linux-gnu/ ./nr-softmodem -O /etc/ran_development/CONFs/gnb.sa.band78.66prb.fhi72.2x2-liteon-F-Release.conf--thread-pool 21,22,23,24,25,26,27,28
Result:
iperf UDP uplink
[ 5] 0.00-10.20 sec 89.9 MBytes 73.9 Mbits/sec 0.156 ms 212/64848 (0.33%) receiver
iperf UDP downlink
[ 5] 0.00-10.00 sec 361 MBytes 303 Mbits/sec 0.077 ms 277662/542891 (51%) receiver
D. Difference between LiteOn FR2 E release configuration file and that for F release is
diff gnb.sa.band78.66prb.fhi72.2x2-liteon-KB.conf gnb.sa.band78.66prb.fhi72.2x2-liteon-F-Release.conf 39d38
< beam_weights = [1, 1];
225a225
> beam_weights = [1];
312c312,313
< mtu = 1500; # check if xran uses this properly
---
> #mtu = 1500; # check if xran uses this properly
> mtu = 9000; # check if xran uses this properly
313a315,316
> RunSlotPrbMapBySymbol = 1;
> LiteOnIgnoreUPSectionId = 1;
Add the F patch that work on both Benetel and LiteOn RU. support
fh_config parameters RunSlotPrbMapBySymbol and LiteOnIgnoreUPSectionId.
Change version number.
Fix bug "no AMF for UE"
It might happen that the RRC does not know the AMF UE NGAP ID, yet. Even
in that case, we should forward the release request to the NGAP module,
which can either forward a message to the AMF, or reply back to release
the UE. This avoids an error where the CU claims there was no AMF, when
there actually is.
One possible problematic behavior is if a UE disconnects before the gNB
receives an NGAP Initial Context Setup. In this case, the AMF UE NGAP ID
was not forwarded to the RRC (although it was known at NGAP), thus
blocking the release of the UE.
This is the main fix, the rest are minor fixes:
- store AMF UE NGAP ID as early as possible
- warn in MAC if UE unknown for UE context release command
- show TEIDs with correct endianness in GTP
- avoid NG Setup Failure+Setup log.
Introduce SRS physical simulator and improvements
This MR consists of two parts:
- Introduces SRS physical simulator to test different configurations of
SRS
- Improvements in the SRS channel estimation (Addressing the comments
from old, unfinished MR !2875)
- rewrite nr_srs_channel_estimation() to loop over rx antennas and
antenna ports to be able to parallelize
- Improvements in timing_advance_offset and timing_advance_offset_nsec
computation
- Introduce SRS multi-symbol channel estimation
- The channel impulse response is estimated from the averaged
channel frequency response over multiple symbols
- The channel frequency estimates are left as they are to be able to
estimate doppler in the future
- Simplify SRS channel estimation to handle memory alignment in the
case of different SRS configurations (eg: comboffset)
To use multiple symbols when running gNB, the following parameters needs
to be edited in the function get_srs_resource()
- srs_res->resourceMapping.startPosition with a range from {0,1,..,5}
corresponds to the start symbol {13, 12, .. 8} with in a slot
- srs_res->resourceMapping.nrofSymbols indicates the number of symbols
{n1, n2, and n4}
Make sure the that start symbol + number of symbols is < 14
The timing results for SRS in develop and srs_phy_simulator are as follows:
Command used: sudo ./nr_ulsim -n1000 -s50 -S50 -R273 -W2 -y2 -z2 -E 1 -P
develop
|__ RX SRS time 124.94 us (1000 trials) (124.94 total [ms])
|__ Generate SRS sequence time 0.05 us (1000 trials) ( 0.05 total [ms])
|__ Get SRS signal time 19.41 us (1000 trials) ( 19.41 total [ms])
|__ SRS channel estimation time 89.11 us (1000 trials) ( 89.11 total [ms])
|__ SRS timing advance estimation time 13.10 us (1000 trials) ( 13.10 total [ms])
|__ SRS report TLV build time 2.80 us (1000 trials) ( 2.80 total [ms])
|__ SRS beam report build time 0.00 us ( 0 trials)
|__ SRS IQ matrix build time 2.73 us (1000 trials)
srs_phy_simulator
|__ RX SRS time 211.93 us (1000 trials) (211.93 total [ms])
|__ Generate SRS sequence time 0.04 us (1000 trials) ( 0.04 total [ms])
|__ Get SRS signal time 19.55 us (1000 trials) ( 19.55 total [ms])
|__ SRS channel estimation time 152.05 us (1000 trials) (152.05 total [ms])
|__ SRS timing advance estimation time 36.67 us (1000 trials) ( 36.67 total [ms])
|__ SRS report TLV build time 2.96 us (1000 trials) ( 2.96 total [ms])
|__ SRS beam report build time 0.00 us ( 0 trials)
|__ SRS IQ matrix build time 2.88 us (1000 trials)
Note that in srs_phy_simulator, to compute timing offset ns, an
oversampling factor of 2 is performed. Also, for peak detection, we
average the channel estimates for every port.
fix array lenght errors, k variable wrapping threshold. Make the code smaller and more efficient
generate_nr_prach() has several errors coming from replace int16_t by
c16_t, and also older error in k wrapping at the end of the symbol
the code is also ridiculously complex, wasting memory and cpu time in
intermediate useless buffers and headache usage of memmove()
On NGSetupFailure, before moving, we might have
[NGAP] Received NG setup failure for AMF... please check your parameters
[NGAP] Received NGSetupResponse from AMF
In the Initial Context Setup message, the NGAP forwards the AMF UE ID,
but not in the DL NAS Message, although 38.413 says, in $8.3.1.2 either
> The NG-RAN node shall use the AMF UE NGAP ID IE and RAN UE NGAP ID IE
> received in the INITIAL CONTEXT SETUP REQUEST message as identification
> of the logical connection
or in $8.6.2.2
> The NG-RAN node shall use the AMF UE NGAP ID IE and RAN UE NGAP ID IE
> received in the DOWNLINK NAS TRANSPORT message as identification of the
> logical connection
So forward in both cases for harmonization.
It might happen that the RRC does not know the AMF UE NGAP ID, yet. Even
in that case, we should forward the release request to the NGAP module,
which can either forward a message to the AMF, or reply back to release
the UE.
Reported-By: Jegor Zelenjak <jzelenjak@proton.me>
Make gpd config utility global
Make gpd a global utility macro for reading config/command line
parameters. Add a corresponding function with full name for clarity,
keep the short name for the macro for backward compatibility and ease of
use.
The main benefit of gpd/config_get_paramdef_from_name macro/function is
that it does not require maintaining a separate parameter index list.
Update physim timing thresholds in gNB-N300-Timing-Phytest-LDPC
The lower bound for the tests are too tight and any slight improvement
in the timing can result in a test failure. For example, these tests
were failing due to the improvements from the MR !3718
The lower bound for the tests are too tight and any slight improvement in the timing can result in a test failure.
For example, these tests were failing due to the improvements from the MR 3718
- We use the same function at gNB and UE.
- We always use nb_antennas_tx to check the max possible number of ports (which is wrong).
- At gNB, we should use nb_antennas_rx and at the UE, we should use nb_antennas_tx.
The memory alignment is required to use c16multaddVectRealComplex
in SRS channel interpolation. With a change in SRS comb_offset, the
existing algorithm was giving segmentation fault.
The existing srs channel estimation required memory alignment at two
stages. 1. When k = 0 (the first srs subcarrier), 2. When subcarrier <
K_TC (wrapped around after ofdm_symbol_size). Thus two memory alignments
are required leading to complications.
The srs channel estimation is now simplified to do it linearly instead of
wrapping around. This simplified the memory alignment required only when
k = 0.
- Introduce signal energy and noise variance functions
- Combine rotation and OFDM modulation RX as a function
- Harmonize the use of number of antennas across the code
- Rename nr_ue_pusch_common_procedures() to nr_tx_rotation_and_ofdm_mod() to decribe the functionality better
Robert Schmidt