maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
laptop
openairinterface5g/openair1/SIMULATION/NR_PHY/pbchsim.c
T
Robert Schmidt 2bea71a80a Avoid use of FAPI message buffers in msgDataTx 
Note: after this commit, monolithic works but nFAPI operation is broken
and fixed in the next commit, to keep the changes small(er). All
simulators work.

This commit removes the use of msgDataTx's intermediate buffers for FAPI
messages and the call of the "Schedule response". The latter incurs an
additional copy of FAPI messages for the TX chain (for the RX chain, it
is and will remain there) which we can avoid.

Instead, it uses an NR_Sched_Rsp_t-typed variable sched_response to
store the results of the scheduler when called from tx_func(). Thus, the
scheduler remains unchanged (it gets a pointer to where to put FAPI
messages), but we don't call nr_schedule_response() to then copy FAPI
messages into the L1, but have them in a local variable sched_response.
sched_response on on the data segment, as it is big and would overflow
the stack; at the same time, this is ok because only one tx_func() runs
at a time.

Since we don't use allocate_sched_response() anymore, we don't need
deref_sched_response().

clear_slot_beamid() is moved to tx_func(), as it was called in
nr_schedule_response().

Since the "intermediate" NR_gNB_DLSCH_t structure groups both the
DL_tti_pdsch and TX_data.req structures, a pointer has been created to
point to pdsch_pdu. This affects a number of simulators, as they have to
put some messages on the stack:

- nr_dlschsim: put the corresponding variable on the stack
- nr_pbchsim: a new array for the SSB PDUs has been introduced

Further, these changes are now necessary:

- nr_dlsim:  there were variables "rel15" and "pdsch_pdu_rel15" that
  point to the same PDSCH PDU. At least "rel15" would not exist, as the
  corresponding pointer is now populated in phy_procedures_gNB_TX(), and
  we therefore refer to the single PDSCH PDU variable with
  "pdsch_pdu_rel15", but at the place where "rel15" used to be
  initialized.
- nr_ulsim: use nr_save_ul_tti_req() to load PDUs into the RX chain
  instead of nr_schedule_response(), which does not exist anymore.
2025-11-14 18:16:00 +01:00

812 lines
26 KiB
C
Raw Permalink Blame History

/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
#include <string.h>
#include <math.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include "common/config/config_userapi.h"
#include "common/utils/LOG/log.h"
#include "common/utils/load_module_shlib.h"
#include "common/ran_context.h"
#include "common/utils/nr/nr_common.h"
#include "PHY/types.h"
#include "PHY/defs_nr_common.h"
#include "PHY/defs_nr_UE.h"
#include "PHY/defs_gNB.h"
#include "PHY/NR_REFSIG/refsig_defs_ue.h"
#include "PHY/MODULATION/modulation_eNB.h"
#include "PHY/MODULATION/modulation_UE.h"
#include "PHY/MODULATION/nr_modulation.h"
#include "PHY/INIT/nr_phy_init.h"
#include "PHY/NR_TRANSPORT/nr_transport_proto.h"
#include "PHY/NR_UE_TRANSPORT/nr_transport_proto_ue.h"
#include "PHY/NR_UE_ESTIMATION/nr_estimation.h"
#include "PHY/phy_vars.h"
#include "SCHED_NR/sched_nr.h"
#include "openair1/SIMULATION/TOOLS/sim.h"
#include "openair1/SIMULATION/RF/rf.h"
#include "openair1/SIMULATION/NR_PHY/nr_unitary_defs.h"
#include "openair1/PHY/MODULATION/nr_modulation.h"
#include <executables/softmodem-common.h>
#include <executables/nr-uesoftmodem.h>
#include "nfapi/oai_integration/vendor_ext.h"
//#define DEBUG_NR_PBCHSIM
PHY_VARS_gNB *gNB;
PHY_VARS_NR_UE *UE;
RAN_CONTEXT_t RC;
int32_t uplink_frequency_offset[MAX_NUM_CCs][4];
double cpuf;
// needed for some functions
openair0_config_t openair0_cfg[MAX_CARDS];
uint8_t const nr_rv_round_map[4] = {0, 2, 3, 1};
void inc_ref_sched_response(int _)
{
LOG_E(PHY, "fatal\n");
exit(1);
}
void deref_sched_response(int _)
{
LOG_E(PHY, "fatal\n");
exit(1);
}
static softmodem_params_t softmodem_params;
softmodem_params_t *get_softmodem_params(void) {
return &softmodem_params;
}
nrUE_params_t nrUE_params={0};
nrUE_params_t *get_nrUE_params(void) {
return &nrUE_params;
}
void init_downlink_harq_status(NR_DL_UE_HARQ_t *dl_harq) {}
NR_IF_Module_t *NR_IF_Module_init(int Mod_id) { return (NULL); }
nfapi_mode_t nfapi_getmode(void) { return NFAPI_MODE_UNKNOWN; }
void nr_fill_dl_indication(nr_downlink_indication_t *dl_ind,
fapi_nr_dci_indication_t *dci_ind,
fapi_nr_rx_indication_t *rx_ind,
const UE_nr_rxtx_proc_t *proc,
PHY_VARS_NR_UE *ue,
void *phy_data)
{
}
void nr_fill_rx_indication(fapi_nr_rx_indication_t *rx_ind,
uint8_t pdu_type,
PHY_VARS_NR_UE *ue,
NR_UE_DLSCH_t *dlsch0,
NR_UE_DLSCH_t *dlsch1,
uint16_t n_pdus,
const UE_nr_rxtx_proc_t *proc,
void *typeSpecific,
uint8_t *b)
{
}
configmodule_interface_t *uniqCfg = NULL;
int main(int argc, char **argv)
{
stop = false;
__attribute__((unused)) struct sigaction oldaction;
sigaction(SIGINT, &sigint_action, &oldaction);
int i,aa,start_symbol;
double sigma2, sigma2_dB=10,SNR,snr0=-2.0,snr1=2.0;
double cfo=0;
uint8_t snr1set=0;
c16_t **txdata;
double **s_re,**s_im,**r_re,**r_im;
//double iqim = 0.0;
double ip =0.0;
//unsigned char pbch_pdu[6];
// int sync_pos, sync_pos_slot;
// FILE *rx_frame_file;
FILE *output_fd = NULL;
//uint8_t write_output_file=0;
//int result;
//int freq_offset;
// int subframe_offset;
// char fname[40], vname[40];
int trial,n_trials=1,n_errors=0,n_errors_payload=0;
int ret_test = 1;
uint8_t transmission_mode = 1,n_tx=1,n_rx=1;
uint16_t Nid_cell=0;
uint64_t SSB_positions=0x01;
int ssb_subcarrier_offset = 0;
int ssb_scan_threads = 0;
channel_desc_t *gNB2UE;
//uint8_t extended_prefix_flag=0;
//int8_t interf1=-21,interf2=-21;
FILE *input_fd=NULL,*pbch_file_fd=NULL;
//uint32_t nsymb,tx_lev,tx_lev1 = 0,tx_lev2 = 0;
//char input_val_str[50],input_val_str2[50];
//uint8_t frame_mod4,num_pdcch_symbols = 0;
//double pbch_sinr;
//int pbch_tx_ant;
SCM_t channel_model=AWGN;//Rayleigh1_anticorr;
int N_RB_DL=273,mu=1;
//unsigned char frame_type = 0;
unsigned char pbch_phase = 0;
int frame=0;
int frame_length_complex_samples;
__attribute__((unused))
int frame_length_complex_samples_no_prefix;
NR_DL_FRAME_PARMS *frame_parms;
int ret;
int run_initial_sync=0;
int loglvl=OAILOG_WARNING;
float target_error_rate = 0.01;
int seed = 0;
cpuf = get_cpu_freq_GHz();
if ((uniqCfg = load_configmodule(argc, argv, CONFIG_ENABLECMDLINEONLY)) == 0) {
exit_fun("[NR_PBCHSIM] Error, configuration module init failed\n");
}
int c;
while ((c = getopt (argc, argv, "--:O:c:F:g:hIL:m:M:n:N:o:P:r:R:s:S:x:y:z:")) != -1) {
/* ignore long options starting with '--', option '-O' and their arguments that are handled by configmodule */
/* with this opstring getopt returns 1 for non-option arguments, refer to 'man 3 getopt' */
if (c == 1 || c == '-' || c == 'O')
continue;
printf("handling optarg %c\n",c);
switch (c) {
case 'c':
ssb_subcarrier_offset = atoi(optarg);
break;
/*case 'f':
write_output_file=1;
output_fd = fopen(optarg,"w");
if (output_fd==NULL) {
printf("Error opening %s\n",optarg);
exit(-1);
}
break;*/
/*case 'd':
frame_type = 1;
break;*/
case 'F':
input_fd = fopen(optarg,"r");
if (input_fd==NULL) {
printf("Problem with filename %s. Exiting.\n", optarg);
exit(-1);
}
break;
case 'g':
switch((char)*optarg) {
case 'A':
channel_model=SCM_A;
break;
case 'B':
channel_model=SCM_B;
break;
case 'C':
channel_model=SCM_C;
break;
case 'D':
channel_model=SCM_D;
break;
case 'E':
channel_model=EPA;
break;
case 'F':
channel_model=EVA;
break;
case 'G':
channel_model=ETU;
break;
default:
printf("Unsupported channel model! Exiting.\n");
exit(-1);
}
break;
/*
case 'i':
interf1=atoi(optarg);
break;
*/
case 'I':
run_initial_sync=1;
target_error_rate=0.1;
break;
/*
case 'j':
interf2=atoi(optarg);
break;*/
case 'L':
loglvl = atoi(optarg);
break;
case 'm':
mu = atoi(optarg);
break;
case 'M':
SSB_positions = atoi(optarg);
break;
case 'n':
n_trials = atoi(optarg);
break;
case 'N':
Nid_cell = atoi(optarg);
break;
case 'o':
cfo = atof(optarg);
#ifdef DEBUG_NR_PBCHSIM
printf("Setting CFO to %f Hz\n",cfo);
#endif
break;
/*case 'p':
extended_prefix_flag=1;
break;*/
case 'P':
pbch_phase = atoi(optarg);
if (pbch_phase>3)
printf("Illegal PBCH phase (0-3) got %d\n",pbch_phase);
break;
/*
case 'r':
ricean_factor = pow(10,-.1*atof(optarg));
if (ricean_factor>1) {
printf("Ricean factor must be between 0 and 1\n");
exit(-1);
}
break;
*/
case 'r':
seed = atoi(optarg);
break;
case 'R':
N_RB_DL = atoi(optarg);
break;
case 's':
snr0 = atof(optarg);
#ifdef DEBUG_NR_PBCHSIM
printf("Setting SNR0 to %f\n",snr0);
#endif
break;
case 'S':
snr1 = atof(optarg);
snr1set=1;
#ifdef DEBUG_NR_PBCHSIM
printf("Setting SNR1 to %f\n",snr1);
#endif
break;
/*
case 't':
Td= atof(optarg);
break;
*/
case 'x':
transmission_mode=atoi(optarg);
if ((transmission_mode!=1) && (transmission_mode!=2) && (transmission_mode!=6)) {
printf("Unsupported transmission mode %d. Exiting.\n",transmission_mode);
exit(-1);
}
break;
case 'y':
n_tx=atoi(optarg);
if ((n_tx==0) || (n_tx>2)) {
printf("Unsupported number of TX antennas %d. Exiting.\n", n_tx);
exit(-1);
}
break;
case 'z':
n_rx=atoi(optarg);
if ((n_rx==0) || (n_rx>2)) {
printf("Unsupported number of RX antennas %d. Exiting.\n", n_rx);
exit(-1);
}
break;
default:
case 'h':
printf("%s -F input_filename -g channel_mod -h(elp) -I(nitial sync) -L log_lvl -n n_frames -M SSBs -n frames -N cell_id -o FO -P phase -r seed -R RBs -s snr0 -S snr1 -x transmission_mode -y TXant -z RXant\n",
argv[0]);
//printf("-A Interpolation_filname Run with Abstraction to generate Scatter plot using interpolation polynomial in file\n");
printf("-c SSB subcarrier offset\n");
//printf("-C Generate Calibration information for Abstraction (effective SNR adjustment to remove Pe bias w.r.t. AWGN)\n");
//printf("-d Use TDD\n");
//printf("-f Output filename (.txt format) for Pe/SNR results\n");
printf("-F Input filename (.txt format) for RX conformance testing\n");
printf("-g [A,B,C,D,E,F,G] Use 3GPP SCM (A,B,C,D) or 36-101 (E-EPA,F-EVA,G-ETU) models (ignores delay spread and Ricean factor)\n");
printf("-h This message\n");
//printf("-i Relative strength of first intefering eNB (in dB) - cell_id mod 3 = 1\n");
printf("-I run initial sync with target error rate 0.1\n");
//printf("-j Relative strength of second intefering eNB (in dB) - cell_id mod 3 = 2\n");
printf("-L set the log level (-1 disable, 0 error, 1 warning, 2 info, 3 debug, 4 trace)\n");
printf("-m Numerology index\n");
printf("-M Multiple SSB positions in burst\n");
printf("-n Number of frames to simulate\n");
printf("-N Nid_cell\n");
printf("-o Carrier frequency offset in Hz\n");
//printf("-O oversampling factor (1,2,4,8,16)\n");
//printf("-p Use extended prefix mode\n");
printf("-P PBCH phase, allowed values 0-3\n");
printf("-r set the random number generator seed (default: 0 = current time)\n");
printf("-R N_RB_DL\n");
printf("-s Starting SNR, runs from SNR0 to SNR0 + 10 dB if not -S given. If -n 1, then just SNR is simulated\n");
printf("-S Ending SNR, runs from SNR0 to SNR1\n");
//printf("-t Delay spread for multipath channel\n");
printf("-x Transmission mode (1,2,6 for the moment)\n");
printf("-y Number of TX antennas used in eNB\n");
printf("-z Number of RX antennas used in UE\n");
exit (-1);
break;
}
}
randominit(seed);
logInit();
set_glog(loglvl);
if (snr1set==0)
snr1 = snr0+10;
printf("Initializing gNodeB for mu %d, N_RB_DL %d\n",mu,N_RB_DL);
RC.gNB = (PHY_VARS_gNB**) malloc(sizeof(PHY_VARS_gNB *));
RC.gNB[0] = malloc16_clear(sizeof(*(RC.gNB[0])));
gNB = RC.gNB[0];
gNB->ofdm_offset_divisor = UINT_MAX;
frame_parms = &gNB->frame_parms; //to be initialized I suppose (maybe not necessary for PBCH)
frame_parms->nb_antennas_tx = n_tx;
frame_parms->nb_antennas_rx = n_rx;
frame_parms->nb_antenna_ports_gNB = n_tx;
frame_parms->N_RB_DL = N_RB_DL;
frame_parms->Nid_cell = Nid_cell;
frame_parms->ssb_type = nr_ssb_type_C;
frame_parms->freq_range = mu<2 ? FR1 : FR2;
nr_phy_config_request_sim(gNB, N_RB_DL, N_RB_DL, mu, Nid_cell, SSB_positions);
// TDD configuration
gNB->gNB_config.tdd_table.tdd_period.value = 6;
do_tdd_config_sim(gNB, mu);
phy_init_nr_gNB(gNB);
frame_parms->ssb_start_subcarrier = 12 * gNB->gNB_config.ssb_table.ssb_offset_point_a.value + ssb_subcarrier_offset;
initFloatingCoresTpool(ssb_scan_threads, &nrUE_params.Tpool, false, "UE-tpool");
int n_hf = 0;
int cyclic_prefix_type = NFAPI_CP_NORMAL;
double fs=0, eps;
double scs = 30000;
double txbw, rxbw;
uint32_t samples;
get_samplerate_and_bw(mu, N_RB_DL, frame_parms->threequarter_fs, &fs, &samples, &txbw, &rxbw);
// cfo with respect to sub-carrier spacing
eps = cfo/scs;
// computation of integer and fractional FO to compare with estimation results
int IFO;
if(eps!=0.0){
printf("Introducing a CFO of %lf relative to SCS of %d kHz\n",eps,(int)(scs/1000));
if (eps>0)
IFO=(int)(eps+0.5);
else
IFO=(int)(eps-0.5);
printf("FFO = %lf; IFO = %d\n",eps-IFO,IFO);
}
gNB2UE = new_channel_desc_scm(n_tx, n_rx, channel_model, fs, 0, txbw, 300e-9, 0.0, CORR_LEVEL_LOW, 0, 0, 0, 0);
if (gNB2UE==NULL) {
printf("Problem generating channel model. Exiting.\n");
exit(-1);
}
frame_length_complex_samples = frame_parms->samples_per_subframe*NR_NUMBER_OF_SUBFRAMES_PER_FRAME;
frame_length_complex_samples_no_prefix = frame_parms->samples_per_subframe_wCP;
s_re = malloc(2*sizeof(double*));
s_im = malloc(2*sizeof(double*));
r_re = malloc(2*sizeof(double*));
r_im = malloc(2*sizeof(double*));
txdata = calloc(2, sizeof(c16_t*));
for (i=0; i<2; i++) {
s_re[i] = malloc16_clear(frame_length_complex_samples*sizeof(double));
s_im[i] = malloc16_clear(frame_length_complex_samples*sizeof(double));
r_re[i] = malloc16_clear(frame_length_complex_samples*sizeof(double));
r_im[i] = malloc16_clear(frame_length_complex_samples*sizeof(double));
printf("Allocating %d samples for txdata\n",frame_length_complex_samples);
txdata[i] = malloc16_clear(frame_length_complex_samples * sizeof(c16_t));
}
if (pbch_file_fd!=NULL) {
load_pbch_desc(pbch_file_fd);
}
//configure UE
UE = malloc16_clear(sizeof(*UE));
memcpy(&UE->frame_parms,frame_parms,sizeof(UE->frame_parms));
//phy_init_nr_top(UE); //called from init_nr_ue_signal
if (run_initial_sync==1) UE->is_synchronized = 0;
else UE->is_synchronized = 1;
if(eps!=0.0)
UE->UE_fo_compensation = 1; // if a frequency offset is set then perform fo estimation and compensation
if (init_nr_ue_signal(UE, 1) != 0) {
printf("Error at UE NR initialisation\n");
exit(-1);
}
// generate signal
const uint32_t rxdataF_sz = UE->frame_parms.samples_per_slot_wCP;
__attribute__ ((aligned(32))) c16_t rxdataF[UE->frame_parms.nb_antennas_rx][rxdataF_sz];
nfapi_nr_dl_tti_ssb_pdu ssb_pdu[64] = {0};
if (input_fd==NULL) {
for (i=0; i<frame_parms->Lmax; i++) {
if((SSB_positions >> i) & 0x01) {
const int sc_offset = frame_parms->freq_range == FR1 ? ssb_subcarrier_offset<<mu : ssb_subcarrier_offset;
const int prb_offset = frame_parms->freq_range == FR1 ? gNB->gNB_config.ssb_table.ssb_offset_point_a.value<<mu : gNB->gNB_config.ssb_table.ssb_offset_point_a.value << (mu - 2);
ssb_pdu[i].ssb_pdu_rel15.bchPayload = 0x55dd33;
ssb_pdu[i].ssb_pdu_rel15.SsbBlockIndex = i;
ssb_pdu[i].ssb_pdu_rel15.SsbSubcarrierOffset = sc_offset;
ssb_pdu[i].ssb_pdu_rel15.ssbOffsetPointA = prb_offset;
start_symbol = nr_get_ssb_start_symbol(frame_parms,i);
int slot = start_symbol/14;
for (aa=0; aa<gNB->frame_parms.nb_antennas_tx; aa++)
memset(gNB->common_vars.txdataF[0][aa], 0, frame_parms->samples_per_slot_wCP * sizeof(int32_t));
nr_common_signal_procedures (gNB,frame,slot, &ssb_pdu[i]);
int samp = frame_parms->get_samples_slot_timestamp(slot, frame_parms, 0);
for (aa=0; aa<gNB->frame_parms.nb_antennas_tx; aa++) {
if (cyclic_prefix_type == 1) {
apply_nr_rotation_TX(frame_parms,
gNB->common_vars.txdataF[0][aa],
frame_parms->symbol_rotation[0],
slot,
frame_parms->N_RB_DL,
0,
12);
PHY_ofdm_mod((int *)gNB->common_vars.txdataF[0][aa],
(int *)&txdata[aa][samp],
frame_parms->ofdm_symbol_size,
12,
frame_parms->nb_prefix_samples,
CYCLIC_PREFIX);
} else {
apply_nr_rotation_TX(frame_parms,
gNB->common_vars.txdataF[0][aa],
frame_parms->symbol_rotation[0],
slot,
frame_parms->N_RB_DL,
0,
14);
PHY_ofdm_mod((int *)gNB->common_vars.txdataF[0][aa],
(int*)&txdata[aa][samp],
frame_parms->ofdm_symbol_size,
1,
frame_parms->nb_prefix_samples0,
CYCLIC_PREFIX);
PHY_ofdm_mod((int *)&gNB->common_vars.txdataF[0][aa][frame_parms->ofdm_symbol_size],
(int*)&txdata[aa][samp + frame_parms->nb_prefix_samples0 + frame_parms->ofdm_symbol_size],
frame_parms->ofdm_symbol_size,
13,
frame_parms->nb_prefix_samples,
CYCLIC_PREFIX);
}
}
}
}
LOG_M("txsigF0.m","txsF0", gNB->common_vars.txdataF[0][0],frame_length_complex_samples_no_prefix, 1, 1);
if (gNB->frame_parms.nb_antennas_tx>1)
LOG_M("txsigF1.m","txsF1", gNB->common_vars.txdataF[0][1],frame_length_complex_samples_no_prefix, 1, 1);
} else {
printf("Reading %d samples from file to antenna buffer %d\n",frame_length_complex_samples,0);
UE->UE_fo_compensation = 1; // perform fo compensation when samples from file are used
if (fread(txdata[0],
sizeof(int32_t),
frame_length_complex_samples,
input_fd) != frame_length_complex_samples) {
printf("error reading from file\n");
//exit(-1);
}
}
LOG_M("txsig0.m","txs0", txdata[0],frame_length_complex_samples,1,1);
if (gNB->frame_parms.nb_antennas_tx>1)
LOG_M("txsig1.m","txs1", txdata[1],frame_length_complex_samples,1,1);
if (output_fd)
fwrite(txdata[0],sizeof(int32_t),frame_length_complex_samples,output_fd);
/*int txlev = signal_energy(&txdata[0][5*frame_parms->ofdm_symbol_size + 4*frame_parms->nb_prefix_samples + frame_parms->nb_prefix_samples0],
frame_parms->ofdm_symbol_size + frame_parms->nb_prefix_samples);
printf("txlev %d (%f)\n",txlev,10*log10(txlev));*/
for (SNR = snr0; SNR < snr1 && !stop; SNR+=.2) {
n_errors = 0;
n_errors_payload = 0;
for (trial = 0; trial < n_trials && !stop; trial++) {
for (i=0; i<frame_length_complex_samples; i++) {
for (aa=0; aa<frame_parms->nb_antennas_tx; aa++) {
r_re[aa][i] = (double)txdata[aa][i].r;
r_im[aa][i] = (double)txdata[aa][i].i;
}
}
// multipath channel
//multipath_channel(gNB2UE,s_re,s_im,r_re,r_im,frame_length_complex_samples,0);
//AWGN
sigma2_dB = 20*log10((double)AMP/4)-SNR;
sigma2 = pow(10,sigma2_dB/10);
//printf("sigma2 %f (%f dB), tx_lev %f (%f dB)\n",sigma2,sigma2_dB,txlev,10*log10((double)txlev));
if(eps!=0.0)
rf_rx(r_re, // real part of txdata
r_im, // imag part of txdata
NULL, // interference real part
NULL, // interference imag part
0, // interference power
frame_parms->nb_antennas_rx, // number of rx antennas
frame_length_complex_samples, // number of samples in frame
1.0e9/fs, //sampling time (ns)
cfo, // frequency offset in Hz
0.0, // drift (not implemented)
0.0, // noise figure (not implemented)
0.0, // rx gain in dB ?
200, // 3rd order non-linearity in dB ?
&ip, // initial phase
30.0e3, // phase noise cutoff in kHz
-500.0, // phase noise amplitude in dBc
0.0, // IQ imbalance (dB),
0.0); // IQ phase imbalance (rad)
for (i=0; i<frame_length_complex_samples; i++) {
for (aa=0; aa<frame_parms->nb_antennas_rx; aa++) {
UE->common_vars.rxdata[aa][i].r = (short)(r_re[aa][i] + sqrt(sigma2 / 2) * gaussdouble(0.0, 1.0));
UE->common_vars.rxdata[aa][i].i = (short)(r_im[aa][i] + sqrt(sigma2 / 2) * gaussdouble(0.0, 1.0));
}
}
if (n_trials==1) {
LOG_M("rxsig0.m", "rxs0", UE->common_vars.rxdata[0], frame_parms->samples_per_frame, 1, 1);
if (gNB->frame_parms.nb_antennas_tx > 1)
LOG_M("rxsig1.m", "rxs1", UE->common_vars.rxdata[1], frame_parms->samples_per_frame, 1, 1);
}
if (UE->is_synchronized == 0) {
UE_nr_rxtx_proc_t proc = {0};
nr_gscn_info_t gscnInfo[MAX_GSCN_BAND] = {0};
const int numGscn = 1;
gscnInfo[0].ssbFirstSC = frame_parms->ssb_start_subcarrier;
nr_initial_sync_t ret = nr_initial_sync(&proc, UE, 1, 0, gscnInfo, numGscn);
printf("nr_initial_sync1 returns %s\n", ret.cell_detected ? "cell detected" : "cell not detected");
if (!ret.cell_detected)
n_errors++;
}
else {
UE_nr_rxtx_proc_t proc={0};
uint8_t ssb_index = 0;
const int estimateSz = frame_parms->symbols_per_slot * frame_parms->ofdm_symbol_size;
__attribute__((aligned(32))) struct complex16 dl_ch_estimates[frame_parms->nb_antennas_rx][estimateSz];
__attribute__((
aligned(32))) struct complex16 dl_ch_estimates_time[frame_parms->nb_antennas_rx][frame_parms->ofdm_symbol_size];
while (!((SSB_positions >> ssb_index) & 0x01))
ssb_index++; // to select the first transmitted ssb
UE->symbol_offset = nr_get_ssb_start_symbol(frame_parms, ssb_index);
int ssb_slot = (UE->symbol_offset/14)+(n_hf*(frame_parms->slots_per_frame>>1));
proc.nr_slot_rx = ssb_slot;
proc.gNB_id = 0;
for (int i = UE->symbol_offset + 1; i < UE->symbol_offset + 4; i++) {
nr_slot_fep(UE,
frame_parms,
proc.nr_slot_rx,
i % frame_parms->symbols_per_slot,
rxdataF,
link_type_dl,
0,
UE->common_vars.rxdata);
nr_pbch_channel_estimation(&UE->frame_parms,
&UE->SL_UE_PHY_PARAMS,
estimateSz,
dl_ch_estimates,
dl_ch_estimates_time,
&proc,
i % frame_parms->symbols_per_slot,
i - (UE->symbol_offset + 1),
ssb_index % 8,
n_hf,
frame_parms->ssb_start_subcarrier,
rxdataF,
false,
frame_parms->Nid_cell);
}
fapiPbch_t result;
int ret_ssb_idx;
int ret_symbol_offset;
ret = nr_rx_pbch(UE,
&proc,
true,
estimateSz,
dl_ch_estimates,
frame_parms,
ssb_index % 8,
frame_parms->ssb_start_subcarrier,
Nid_cell,
&result,
&n_hf,
&ret_ssb_idx,
&ret_symbol_offset,
frame_parms->samples_per_frame_wCP,
rxdataF);
if (ret == 0) {
uint32_t xtra_byte = nr_pbch_extra_byte_generation(frame,
n_hf,
ssb_index,
gNB->gNB_config.ssb_table.ssb_subcarrier_offset.value,
frame_parms->Lmax);
int payload_ret = (result.xtra_byte == xtra_byte);
nfapi_nr_dl_tti_ssb_pdu_rel15_t *pdu = &ssb_pdu[ssb_index].ssb_pdu_rel15;
for (int i = 0; i < 3; i++)
payload_ret += (result.decoded_output[i] == ((pdu->bchPayload >> (8 * i)) & 0xff));
// printf("ret %d\n", payload_ret);
if (payload_ret != 4)
n_errors_payload++;
}
if (ret != 0)
n_errors++;
}
} //noise trials
printf("SNR %f: trials %d, n_errors_crc = %d, n_errors_payload %d\n", SNR,n_trials,n_errors,n_errors_payload);
if (((float)n_errors/(float)n_trials <= target_error_rate) && (n_errors_payload==0)) {
printf("PBCH test OK\n");
ret_test = 0;
break;
}
if (n_trials==1)
break;
} // NSR
free_channel_desc_scm(gNB2UE);
int nb_slots_to_set = (1 << mu) * NR_NUMBER_OF_SUBFRAMES_PER_FRAME;
for (int i = 0; i < nb_slots_to_set; ++i)
free(gNB->gNB_config.tdd_table.max_tdd_periodicity_list[i].max_num_of_symbol_per_slot_list);
free(gNB->gNB_config.tdd_table.max_tdd_periodicity_list);
phy_free_nr_gNB(gNB);
free(RC.gNB[0]);
free(RC.gNB);
term_nr_ue_signal(UE, 1);
free(UE);
for (i=0; i<2; i++) {
free(s_re[i]);
free(s_im[i]);
free(r_re[i]);
free(r_im[i]);
free(txdata[i]);
}
free(s_re);
free(s_im);
free(r_re);
free(r_im);
free(txdata);
if (output_fd)
fclose(output_fd);
if (input_fd)
fclose(input_fd);
loader_reset();
logTerm();
return ret_test;
}
Reference in New Issue View Git Blame Copy Permalink