Raphael Defosseux
a3d9d50eb9
Also remove an obsolete sub-pipeline Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>
450 lines
19 KiB
Markdown
450 lines
19 KiB
Markdown
<table style="border-collapse: collapse; border: none;">
|
|
<tr style="border-collapse: collapse; border: none;">
|
|
<td style="border-collapse: collapse; border: none;">
|
|
<a href="http://www.openairinterface.org/">
|
|
<img src="../../../doc/images/oai_final_logo.png" alt="" border=3 height=50 width=150>
|
|
</img>
|
|
</a>
|
|
</td>
|
|
<td style="border-collapse: collapse; border: none; vertical-align: center;">
|
|
<b><font size = "5">OAI Full Stack 5G-NR RF simulation with containers</font></b>
|
|
</td>
|
|
</tr>
|
|
</table>
|
|
|
|
This page is only valid for an `Ubuntu18` host.
|
|
|
|
**NOTE: this version (2022-01-27) has been updated for the `v1.3.0` version of the `OAI 5G CN`.**
|
|
|
|
**TABLE OF CONTENTS**
|
|
|
|
1. [Retrieving the images on Docker-Hub](#1-retrieving-the-images-on-docker-hub)
|
|
2. [Deploy containers](#2-deploy-containers)
|
|
1. [Deploy OAI 5G Core Network](#21-deploy-oai-5g-core-network)
|
|
2. [Deploy OAI gNB in RF simulator mode and in Standalone Mode](#22-deploy-oai-gnb-in-rf-simulator-mode-and-in-standalone-mode)
|
|
3. [Deploy OAI NR-UE in RF simulator mode and in Standalone Mode](#23-deploy-oai-nr-ue-in-rf-simulator-mode-and-in-standalone-mode)
|
|
3. [Check traffic](#3-check-traffic)
|
|
1. [Check your Internet connectivity](#31-check-your-internet-connectivity)
|
|
2. [Start the iperf server inside the NR-UE container](#32-start-the-iperf-server-inside-the-nr-ue-container)
|
|
3. [Start the iperf client inside the ext-dn container](#33-start-the-iperf-client-inside-the-ext-dn-container)
|
|
4. [Un-deployment](#4-un-deployment)
|
|
5. [Explanations on the configuration in the docker-compose.yaml](##5-explanations-on-the-configuration-in-the-docker-composeyaml)
|
|
1. [Making the NR-UE connect to the core network](#51-making-the-nr-ue-connect-to-the-core-network)
|
|
2. [Making the gNB connect to the core network](#52-making-the-gnb-connect-to-the-core-network)
|
|
|
|
# 1. Retrieving the images on Docker-Hub #
|
|
|
|
Currently the images are hosted under the user account `rdefosseoai`.
|
|
|
|
This may change in the future.
|
|
|
|
Once again you may need to log on [docker-hub](https://hub.docker.com/) if your organization has reached pulling limit as `anonymous`.
|
|
|
|
```bash
|
|
$ docker login
|
|
Login with your Docker ID to push and pull images from Docker Hub. If you don't have a Docker ID, head over to https://hub.docker.com to create one.
|
|
Username:
|
|
Password:
|
|
```
|
|
|
|
Now pull images.
|
|
|
|
```bash
|
|
$ docker pull mysql:5.7
|
|
$ docker pull rdefosseoai/oai-amf:latest
|
|
$ docker pull rdefosseoai/oai-nrf:latest
|
|
$ docker pull rdefosseoai/oai-smf:latest
|
|
$ docker pull rdefosseoai/oai-spgwu-tiny:latest
|
|
|
|
$ docker pull rdefosseoai/oai-gnb:develop
|
|
$ docker pull rdefosseoai/oai-nr-ue:develop
|
|
```
|
|
|
|
And **re-tag** them for tutorials' docker-compose file to work.
|
|
|
|
```bash
|
|
$ docker image tag rdefosseoai/oai-amf:latest oai-amf:latest
|
|
$ docker image tag rdefosseoai/oai-nrf:latest oai-nrf:latest
|
|
$ docker image tag rdefosseoai/oai-smf:latest oai-smf:latest
|
|
$ docker image tag rdefosseoai/oai-spgwu-tiny:latest oai-spgwu-tiny:latest
|
|
|
|
$ docker image tag rdefosseoai/oai-gnb:develop oai-gnb:develop
|
|
$ docker image tag rdefosseoai/oai-nr-ue:develop oai-nr-ue:develop
|
|
```
|
|
|
|
```bash
|
|
$ docker logout
|
|
```
|
|
|
|
**CAUTION: 2022/01/27 with the release `v1.3.0` of the `CN5G`, the previous version was not compatible any-more.**
|
|
|
|
**This new version is working only with the `v1.3.0` of the `CN5G`.**
|
|
|
|
# 2. Deploy containers #
|
|
|
|
|
|
|
|
**CAUTION: this SHALL be done in multiple steps.**
|
|
|
|
**Just `docker-compose up -d` WILL NOT WORK!**
|
|
|
|
All the following commands **SHALL** be run from the `ci-scripts/yaml_files/5g_rfsimulator` folder for a deployment with monolithic gNB.
|
|
|
|
For a deployment with the gNB split in CU and DU components, the following commands **SHALL** be run from the `ci-scripts/yaml_files/5g_f1_rfsimulator` folder.
|
|
|
|
## 2.1. Deploy OAI 5G Core Network ##
|
|
|
|
```bash
|
|
$ cd ci-scripts/yaml_files/5g_rfsimulator
|
|
$ docker-compose up -d mysql oai-nrf oai-amf oai-smf oai-spgwu oai-ext-dn
|
|
Creating network "rfsim5g-oai-public-net" with driver "bridge"
|
|
Creating network "rfsim5g-oai-traffic_net-net" with driver "bridge"
|
|
Creating rfsim5g-oai-nrf ... done
|
|
Creating rfsim5g-mysql ... done
|
|
Creating rfsim5g-oai-spgwu ... done
|
|
Creating rfsim5g-oai-amf ... done
|
|
Creating rfsim5g-oai-smf ... done
|
|
Creating rfsim5g-oai-ext-dn ... done
|
|
```
|
|
|
|
Wait for a bit.
|
|
|
|
```bash
|
|
$ docker-compose ps -a
|
|
Name Command State Ports
|
|
-------------------------------------------------------------------------------------------------
|
|
rfsim5g-mysql docker-entrypoint.sh mysqld Up (healthy) 3306/tcp, 33060/tcp
|
|
rfsim5g-oai-amf /bin/bash /openair-amf/bin ... Up (healthy) 38412/sctp, 80/tcp, 9090/tcp
|
|
rfsim5g-oai-ext-dn /bin/bash -c apt update; ... Up (healthy)
|
|
rfsim5g-oai-nrf /bin/bash /openair-nrf/bin ... Up (healthy) 80/tcp, 9090/tcp
|
|
rfsim5g-oai-smf /bin/bash -c /openair-smf/ ... Up (healthy) 80/tcp, 8805/udp, 9090/tcp
|
|
rfsim5g-oai-spgwu /openair-spgwu-tiny/bin/en ... Up (healthy) 2152/udp, 8805/udp
|
|
```
|
|
|
|
At this point, you can prepare a capture on the newly-created public docker bridges:
|
|
|
|
```bash
|
|
$ ifconfig
|
|
...
|
|
rfsim5g-public: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
|
|
inet 192.168.71.129 netmask 255.255.255.192 broadcast 192.168.71.191
|
|
inet6 fe80::42:c4ff:fe2b:3d38 prefixlen 64 scopeid 0x20<link>
|
|
ether 02:42:c4:2b:3d:38 txqueuelen 0 (Ethernet)
|
|
RX packets 4 bytes 112 (112.0 B)
|
|
RX errors 0 dropped 0 overruns 0 frame 0
|
|
TX packets 7 bytes 626 (626.0 B)
|
|
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
|
|
|
|
rfsim5g-traffic: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
|
|
inet 192.168.72.129 netmask 255.255.255.192 broadcast 192.168.72.191
|
|
inet6 fe80::42:b5ff:fed3:e732 prefixlen 64 scopeid 0x20<link>
|
|
ether 02:42:b5:d3:e7:32 txqueuelen 0 (Ethernet)
|
|
RX packets 2652 bytes 142335 (142.3 KB)
|
|
RX errors 0 dropped 0 overruns 0 frame 0
|
|
TX packets 3999 bytes 23367972 (23.3 MB)
|
|
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
|
|
...
|
|
```
|
|
|
|
## 2.2. Deploy OAI gNB in RF simulator mode and in Standalone Mode ##
|
|
|
|
**CAUTION: To execute this 2nd step, the whole `CN5G` SHALL be in `healthy` state (especially the `mysql` container).**
|
|
|
|
The gNB can be deployed either in monolithic mode, or in CU/DU split mode.
|
|
- For a deployment with a monolithic gNB:
|
|
|
|
```bash
|
|
$ docker-compose up -d oai-gnb
|
|
rfsim5g-oai-nrf is up-to-date
|
|
rfsim5g-oai-spgwu is up-to-date
|
|
rfsim5g-oai-ext-dn is up-to-date
|
|
Creating rfsim5g-oai-gnb ... done
|
|
```
|
|
- For a deployment with the gNB split in CU and DU components:
|
|
```bash
|
|
#Deployment of the CU
|
|
$ docker-compose up -d oai-cu
|
|
```
|
|
|
|
```bash
|
|
#Deployment of the DU
|
|
$ docker-compose up -d oai-du
|
|
```
|
|
Wait for a bit.
|
|
|
|
```bash
|
|
$ docker-compose ps -a
|
|
Name Command State Ports
|
|
-------------------------------------------------------------------------------------------------
|
|
rfsim5g-mysql docker-entrypoint.sh mysqld Up (healthy) 3306/tcp, 33060/tcp
|
|
rfsim5g-oai-amf /bin/bash /openair-amf/bin ... Up (healthy) 38412/sctp, 80/tcp, 9090/tcp
|
|
rfsim5g-oai-ext-dn /bin/bash -c apt update; ... Up (healthy)
|
|
rfsim5g-oai-gnb /opt/oai-gnb/bin/entrypoin ... Up (healthy)
|
|
rfsim5g-oai-nrf /bin/bash /openair-nrf/bin ... Up (healthy) 80/tcp, 9090/tcp
|
|
rfsim5g-oai-smf /bin/bash -c /openair-smf/ ... Up (healthy) 80/tcp, 8805/udp, 9090/tcp
|
|
rfsim5g-oai-spgwu /openair-spgwu-tiny/bin/en ... Up (healthy) 2152/udp, 8805/udp
|
|
```
|
|
|
|
You can verify that the `gNB` is connected with the `AMF`:
|
|
|
|
```bagh
|
|
$ docker logs rfsim5g-oai-amf
|
|
...
|
|
[AMF] [amf_app] [info ] |----------------------------------------------------gNBs' information-------------------------------------------|
|
|
[AMF] [amf_app] [info ] | Index | Status | Global ID | gNB Name | PLMN |
|
|
[AMF] [amf_app] [info ] | 1 | Connected | 0x0 | gnb-rfsim | 208, 99 |
|
|
[AMF] [amf_app] [info ] |----------------------------------------------------------------------------------------------------------------|
|
|
...
|
|
```
|
|
|
|
## 2.3. Deploy OAI NR-UE in RF simulator mode and in Standalone Mode ##
|
|
|
|
```bash
|
|
$ docker-compose up -d oai-nr-ue
|
|
rfsim5g-mysql is up-to-date
|
|
rfsim5g-oai-nrf is up-to-date
|
|
rfsim5g-oai-spgwu is up-to-date
|
|
rfsim5g-oai-ext-dn is up-to-date
|
|
rfsim5g-oai-gnb is up-to-date
|
|
Creating rfsim5g-oai-nr-ue ... done
|
|
```
|
|
|
|
Wait for a bit.
|
|
|
|
```bash
|
|
$ docker-compose ps -a
|
|
Name Command State Ports
|
|
-------------------------------------------------------------------------------------------------
|
|
rfsim5g-mysql docker-entrypoint.sh mysqld Up (healthy) 3306/tcp, 33060/tcp
|
|
rfsim5g-oai-amf /bin/bash /openair-amf/bin ... Up (healthy) 38412/sctp, 80/tcp, 9090/tcp
|
|
rfsim5g-oai-ext-dn /bin/bash -c apt update; ... Up (healthy)
|
|
rfsim5g-oai-gnb /opt/oai-gnb/bin/entrypoin ... Up (healthy)
|
|
rfsim5g-oai-nr-ue /opt/oai-nr-ue/bin/entrypo ... Up (healthy)
|
|
rfsim5g-oai-nrf /bin/bash /openair-nrf/bin ... Up (healthy) 80/tcp, 9090/tcp
|
|
rfsim5g-oai-smf /bin/bash -c /openair-smf/ ... Up (healthy) 80/tcp, 8805/udp, 9090/tcp
|
|
rfsim5g-oai-spgwu /openair-spgwu-tiny/bin/en ... Up (healthy) 2152/udp, 8805/udp
|
|
```
|
|
|
|
Making sure the OAI UE is connected:
|
|
|
|
```bash
|
|
$ docker exec -it rfsim5g-oai-nr-ue /bin/bash
|
|
root@bb4d400a832d:/opt/oai-nr-ue# ifconfig
|
|
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
|
|
inet 192.168.71.137 netmask 255.255.255.192 broadcast 192.168.71.191
|
|
ether 02:42:c0:a8:47:89 txqueuelen 0 (Ethernet)
|
|
RX packets 224259 bytes 5821372018 (5.8 GB)
|
|
RX errors 0 dropped 0 overruns 0 frame 0
|
|
TX packets 235916 bytes 7848786376 (7.8 GB)
|
|
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
|
|
|
|
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
|
|
inet 127.0.0.1 netmask 255.0.0.0
|
|
loop txqueuelen 1000 (Local Loopback)
|
|
RX packets 0 bytes 0 (0.0 B)
|
|
RX errors 0 dropped 0 overruns 0 frame 0
|
|
TX packets 0 bytes 0 (0.0 B)
|
|
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
|
|
|
|
oaitun_ue1: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500
|
|
inet 12.1.1.2 netmask 255.255.255.0 destination 12.1.1.2
|
|
unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 500 (UNSPEC)
|
|
RX packets 0 bytes 0 (0.0 B)
|
|
RX errors 0 dropped 0 overruns 0 frame 0
|
|
TX packets 0 bytes 0 (0.0 B)
|
|
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
|
|
```
|
|
|
|
# 3. Check traffic #
|
|
|
|
## 3.1. Check your Internet connectivity ##
|
|
|
|
```bash
|
|
$ docker exec -it rfsim5g-oai-nr-ue /bin/bash
|
|
root@bb4d400a832d:/opt/oai-nr-ue# ping -I oaitun_ue1 -c 10 www.lemonde.fr
|
|
PING s2.shared.global.fastly.net (151.101.122.217) from 12.1.1.2 oaitun_ue1: 56(84) bytes of data.
|
|
64 bytes from 151.101.122.217 (151.101.122.217): icmp_seq=1 ttl=53 time=64.5 ms
|
|
64 bytes from 151.101.122.217 (151.101.122.217): icmp_seq=2 ttl=53 time=37.0 ms
|
|
64 bytes from 151.101.122.217 (151.101.122.217): icmp_seq=3 ttl=53 time=43.2 ms
|
|
64 bytes from 151.101.122.217 (151.101.122.217): icmp_seq=4 ttl=53 time=43.2 ms
|
|
64 bytes from 151.101.122.217 (151.101.122.217): icmp_seq=5 ttl=53 time=54.3 ms
|
|
64 bytes from 151.101.122.217 (151.101.122.217): icmp_seq=6 ttl=53 time=24.0 ms
|
|
64 bytes from 151.101.122.217 (151.101.122.217): icmp_seq=7 ttl=53 time=32.5 ms
|
|
64 bytes from 151.101.122.217 (151.101.122.217): icmp_seq=8 ttl=53 time=37.0 ms
|
|
64 bytes from 151.101.122.217 (151.101.122.217): icmp_seq=9 ttl=53 time=41.2 ms
|
|
64 bytes from 151.101.122.217 (151.101.122.217): icmp_seq=10 ttl=53 time=50.3 ms
|
|
|
|
--- s2.shared.global.fastly.net ping statistics ---
|
|
10 packets transmitted, 10 received, 0% packet loss, time 9011ms
|
|
rtt min/avg/max/mdev = 24.035/42.765/64.557/10.904 ms
|
|
```
|
|
|
|
If it does not work, certainly you need to modify the DNS values in the docker-compose.
|
|
|
|
But you can also check with the `ext-dn` container (IP address is `192.168.72.135` in docker-compose)
|
|
|
|
```bash
|
|
$ docker exec -it rfsim5g-oai-nr-ue /bin/bash
|
|
root@bb4d400a832d# ping -I oaitun_ue1 -c 2 192.168.72.135
|
|
PING 192.168.72.135 (192.168.72.135) from 12.1.1.2 oaitun_ue1: 56(84) bytes of data.
|
|
64 bytes from 192.168.72.135: icmp_seq=1 ttl=63 time=10.9 ms
|
|
64 bytes from 192.168.72.135: icmp_seq=2 ttl=63 time=16.5 ms
|
|
|
|
--- 192.168.72.135 ping statistics ---
|
|
2 packets transmitted, 2 received, 0% packet loss, time 1001ms
|
|
rtt min/avg/max/mdev = 10.939/13.747/16.556/2.810 ms
|
|
```
|
|
|
|
Let now try to check UDP traffic in Downlink.
|
|
|
|
You will need 2 terminals: one in the NR-UE container, one in the ext-dn container.
|
|
|
|
## 3.2. Start the `iperf` server inside the NR-UE container ##
|
|
|
|
```bash
|
|
$ docker exec -it rfsim5g-oai-nr-ue /bin/bash
|
|
root@bb4d400a832d:/opt/oai-nr-ue# iperf -B 12.1.1.2 -u -i 1 -s
|
|
------------------------------------------------------------
|
|
Server listening on UDP port 5001
|
|
Binding to local address 12.1.1.2
|
|
Receiving 1470 byte datagrams
|
|
UDP buffer size: 208 KByte (default)
|
|
------------------------------------------------------------
|
|
```
|
|
|
|
## 3.3. Start the `iperf` client inside the ext-dn container ##
|
|
|
|
```bash
|
|
$ docker exec -it rfsim5g-oai-ext-dn /bin/bash
|
|
root@f239e31a0bd0:/# iperf -c 12.1.1.2 -u -i 1 -t 20 -b 500K
|
|
------------------------------------------------------------
|
|
Client connecting to 12.1.1.2, UDP port 5001
|
|
Sending 1470 byte datagrams, IPG target: 22968.75 us (kalman adjust)
|
|
UDP buffer size: 208 KByte (default)
|
|
------------------------------------------------------------
|
|
[ 3] local 192.168.72.135 port 58800 connected with 12.1.1.2 port 5001
|
|
[ ID] Interval Transfer Bandwidth
|
|
[ 3] 0.0- 1.0 sec 64.6 KBytes 529 Kbits/sec
|
|
[ 3] 1.0- 2.0 sec 63.2 KBytes 517 Kbits/sec
|
|
[ 3] 2.0- 3.0 sec 61.7 KBytes 506 Kbits/sec
|
|
[ 3] 3.0- 4.0 sec 63.2 KBytes 517 Kbits/sec
|
|
[ 3] 4.0- 5.0 sec 61.7 KBytes 506 Kbits/sec
|
|
[ 3] 5.0- 6.0 sec 63.2 KBytes 517 Kbits/sec
|
|
[ 3] 6.0- 7.0 sec 61.7 KBytes 506 Kbits/sec
|
|
[ 3] 7.0- 8.0 sec 63.2 KBytes 517 Kbits/sec
|
|
[ 3] 8.0- 9.0 sec 61.7 KBytes 506 Kbits/sec
|
|
[ 3] 9.0-10.0 sec 63.2 KBytes 517 Kbits/sec
|
|
[ 3] 10.0-11.0 sec 61.7 KBytes 506 Kbits/sec
|
|
[ 3] 11.0-12.0 sec 63.2 KBytes 517 Kbits/sec
|
|
[ 3] 12.0-13.0 sec 61.7 KBytes 506 Kbits/sec
|
|
[ 3] 13.0-14.0 sec 63.2 KBytes 517 Kbits/sec
|
|
[ 3] 14.0-15.0 sec 63.2 KBytes 517 Kbits/sec
|
|
[ 3] 15.0-16.0 sec 61.7 KBytes 506 Kbits/sec
|
|
[ 3] 16.0-17.0 sec 63.2 KBytes 517 Kbits/sec
|
|
[ 3] 17.0-18.0 sec 61.7 KBytes 506 Kbits/sec
|
|
[ 3] 18.0-19.0 sec 63.2 KBytes 517 Kbits/sec
|
|
[ 3] 19.0-20.0 sec 61.7 KBytes 506 Kbits/sec
|
|
[ 3] 0.0-20.0 sec 1.22 MBytes 512 Kbits/sec
|
|
[ 3] Sent 872 datagrams
|
|
[ 3] Server Report:
|
|
[ 3] 0.0-20.0 sec 1.22 MBytes 510 Kbits/sec 0.000 ms 3/ 872 (0%)
|
|
```
|
|
|
|
Back on your NR-UE terminal you shall see:
|
|
|
|
```bash
|
|
[ 3] local 12.1.1.2 port 5001 connected with 192.168.72.135 port 58800
|
|
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams
|
|
[ 3] 0.0- 1.0 sec 63.2 KBytes 517 Kbits/sec 1.113 ms 0/ 44 (0%)
|
|
[ 3] 1.0- 2.0 sec 61.7 KBytes 506 Kbits/sec 1.466 ms 0/ 43 (0%)
|
|
[ 3] 2.0- 3.0 sec 63.2 KBytes 517 Kbits/sec 1.770 ms 0/ 44 (0%)
|
|
[ 3] 3.0- 4.0 sec 61.7 KBytes 506 Kbits/sec 1.378 ms 0/ 43 (0%)
|
|
[ 3] 4.0- 5.0 sec 63.2 KBytes 517 Kbits/sec 1.614 ms 0/ 44 (0%)
|
|
[ 3] 5.0- 6.0 sec 63.2 KBytes 517 Kbits/sec 1.427 ms 0/ 44 (0%)
|
|
[ 3] 6.0- 7.0 sec 60.3 KBytes 494 Kbits/sec 1.507 ms 1/ 43 (2.3%)
|
|
[ 3] 7.0- 8.0 sec 63.2 KBytes 517 Kbits/sec 1.409 ms 0/ 44 (0%)
|
|
[ 3] 8.0- 9.0 sec 61.7 KBytes 506 Kbits/sec 1.525 ms 0/ 43 (0%)
|
|
[ 3] 9.0-10.0 sec 63.2 KBytes 517 Kbits/sec 1.393 ms 0/ 44 (0%)
|
|
[ 3] 10.0-11.0 sec 61.7 KBytes 506 Kbits/sec 1.377 ms 0/ 43 (0%)
|
|
[ 3] 11.0-12.0 sec 63.2 KBytes 517 Kbits/sec 1.501 ms 0/ 44 (0%)
|
|
[ 3] 12.0-13.0 sec 61.7 KBytes 506 Kbits/sec 1.788 ms 0/ 43 (0%)
|
|
[ 3] 13.0-14.0 sec 63.2 KBytes 517 Kbits/sec 1.466 ms 0/ 44 (0%)
|
|
[ 3] 14.0-15.0 sec 61.7 KBytes 506 Kbits/sec 1.381 ms 0/ 43 (0%)
|
|
[ 3] 15.0-16.0 sec 61.7 KBytes 506 Kbits/sec 1.417 ms 1/ 44 (2.3%)
|
|
[ 3] 16.0-17.0 sec 61.7 KBytes 506 Kbits/sec 1.569 ms 0/ 43 (0%)
|
|
[ 3] 17.0-18.0 sec 63.2 KBytes 517 Kbits/sec 1.492 ms 1/ 45 (2.2%)
|
|
[ 3] 18.0-19.0 sec 61.7 KBytes 506 Kbits/sec 1.376 ms 0/ 43 (0%)
|
|
[ 3] 19.0-20.0 sec 61.7 KBytes 506 Kbits/sec 1.589 ms 0/ 43 (0%)
|
|
[ 3] 0.0-20.0 sec 1.22 MBytes 510 Kbits/sec 1.551 ms 3/ 872 (0.34%)
|
|
```
|
|
|
|
The `500 Kbits/sec` value may change depending on your CPU power!
|
|
|
|
# 4. Un-deployment #
|
|
|
|
```bash
|
|
$ docker-compose down
|
|
Stopping rfsim5g-oai-nr-ue ... done
|
|
Stopping rfsim5g-oai-gnb ... done
|
|
Stopping rfsim5g-oai-ext-dn ... done
|
|
Stopping rfsim5g-oai-smf ... done
|
|
Stopping rfsim5g-oai-amf ... done
|
|
Stopping rfsim5g-oai-spgwu ... done
|
|
Stopping rfsim5g-oai-nrf ... done
|
|
Stopping rfsim5g-mysql ... done
|
|
Removing rfsim5g-oai-nr-ue ... done
|
|
Removing rfsim5g-oai-gnb ... done
|
|
Removing rfsim5g-oai-ext-dn ... done
|
|
Removing rfsim5g-oai-smf ... done
|
|
Removing rfsim5g-oai-amf ... done
|
|
Removing rfsim5g-oai-spgwu ... done
|
|
Removing rfsim5g-oai-nrf ... done
|
|
Removing rfsim5g-mysql ... done
|
|
Removing network rfsim5g-oai-public-net
|
|
Removing network rfsim5g-oai-traffic_net-net
|
|
```
|
|
|
|
# 5. Explanations on the configuration in the `docker-compose.yaml` #
|
|
|
|
## 5.1. Making the NR-UE connect to the core network ##
|
|
|
|
The NR-UE **SHALL** be provisioned in the core network, especially in the `SQL` database and in the `AMF`.
|
|
|
|
* in AMF section of `docker-compose.yaml` --> `OPERATOR_KEY=c42449363bbad02b66d16bc975d77cc1`
|
|
* in NR-UE section --> `OPC: 'C42449363BBAD02B66D16BC975D77CC1'
|
|
|
|
Both values shall match!
|
|
|
|
This value is also present in the `oai_db.sql` file:
|
|
|
|
```bash
|
|
INSERT INTO `users` VALUES ('208990100001100','1','55000000000000',NULL,'PURGED',50,40000000,100000000,47,0000000000,1,0xfec86ba6eb707ed08905757b1bb44b8f,0,0,0x40,'ebd07771ace8677a',0xc42449363bbad02b66d16bc975d77cc1);
|
|
```
|
|
|
|
As you can see, 2 other values shall match in the NR-UE section of `docker-compose.yaml`:
|
|
|
|
* `FULL_IMSI: '208990100001100'`
|
|
* `FULL_KEY: 'fec86ba6eb707ed08905757b1bb44b8f'`
|
|
|
|
We are also using a dedicated `oai-smf.conf` for the `SMF` container: the `oai` DNN shall match the one in the NR-UE section of `docker-compose.yaml` (`DNN: oai`).
|
|
|
|
## 5.2. Making the gNB connect to the core network ##
|
|
|
|
Mainly you need to match the PLMN in `gNB`, `AMF` and `SPGWU` parameters:
|
|
|
|
* `AMF`
|
|
- `MCC=208`
|
|
- `MNC=99`
|
|
- `PLMN_SUPPORT_TAC=0x0001`
|
|
- ...
|
|
* `SPGWU`
|
|
- `MCC=208`
|
|
- `MNC=99`
|
|
- `TAC=1`
|
|
* `gNB`
|
|
- `MCC: '208'`
|
|
- `MNC: '99'`
|
|
- `TAC: 1`
|
|
|
|
The `ST` and `SD` values shall also match.
|