openairinterface5g/doc/5Gnas.md

**5GS NAS Overview and OAI Implementation status**

This document provides an overview of the 5G System Non-Access Stratum (5GS NAS) protocol as specified in 3GPP TS 24.501. It highlights key message types involved in Mobility and Session Management and explains how these are implemented within the OAI software stack. The document outlines the structure of the OAI codebase by detailing current support for encoding, decoding, and unit testing of specific NAS messages, and explains how the UE handles USIM simulation and message generation.

[TOC]

# About 5GS NAS

The 5G System Non-Access Stratum (5GS NAS) is defined in 3GPP TS 24.501. It operates within the control plane, facilitating communication between the User Equipment (UE) and the Access and Mobility Management Function (AMF) over the N1 interface.

Key 5GS NAS messages:

* Mobility Management (5GMM): Handles UE registration, deregistration, authentication and tracking area updates. 5GMM also manages transitions between idle and connected states.
* Session Management (5GSM): Establishes, modifies, and releases PDU sessions. Coordinates with the Session Management Function (SMF) to manage user-plane resources.

# OAI Implementation Status

The following tables lists implemented NAS messages and whether there is an encoder or decoder function, and if a corresponding unit test exists.

| Type  | Message                                   | Encoding | Decoding | Unit test |
|-------|-------------------------------------------|----------|----------|------------|
| 5GMM  | Service Request                           | yes      | yes      | yes        |
| 5GMM  | Service Accept                            | yes      | yes      | yes        |
| 5GMM  | Service Reject                            | yes      | yes      | yes        |
| 5GMM  | Authentication Response                   | yes      | no       | no         |
| 5GMM  | Identity Response                         | yes      | no       | no         |
| 5GMM  | Security Mode Complete                    | yes      | no       | no         |
| 5GMM  | Uplink NAS Transport                      | yes      | no       | no         |
| 5GMM  | Registration Request                      | yes      | yes      | no         |
| 5GMM  | Registration Accept                       | yes      | yes      | yes        |
| 5GMM  | Registration Complete                     | yes      | yes      | no         |
| 5GMM  | Deregistration Request (UE originating)   | yes      | no       | no         |
| 5GSM  | PDU Session Establishment Request         | yes      | no       | no         |
| 5GSM  | PDU Session Establishment Accept          | no       | yes      | no         |

## Code Structure

[openair3/NAS/NR_UE/nr_nas_msg.c](../openair3/NAS/NR_UE/nr_nas_msg.c):
* NAS procedures and message handlers/callbacks
* Integration with RRC (ITTI) and SDAP
* Invokes enc/dec libraries
* Handles 5GMM state and mode

[openair3/NAS/NR_UE/5GS/fgs_nas_lib.c](../openair3/NAS/NR_UE/5GS/fgs_nas_lib.c):
[openair3/NAS/NR_UE/5GS/NR_NAS_defs.h](../openair3/NAS/NR_UE/5GS/NR_NAS_defs.h):
* encoding and decoding functions for 5G NAS message headers and payloads
* relies on 5GMM/5GSM messages libs for payload encoding

[openair3/NAS/NR_UE/5GS/fgs_nas_utils.h](../openair3/NAS/NR_UE/5GS/fgs_nas_utils.h):
* NAS helpers, macros

[openair3/NAS/NR_UE/5GS/5GMM](../openair3/NAS/NR_UE/5GS/5GMM):
* encoding/decoding functions and definitions for 5GMM NAS messages payloads

[openair3/NAS/NR_UE/5GS/5GMM/MSG/fgmm_lib.c](../openair3/NAS/NR_UE/5GS/5GMM/MSG/fgmm_lib.c):
[openair3/NAS/NR_UE/5GS/5GMM/MSG/fgmm_lib.h](../openair3/NAS/NR_UE/5GS/5GMM/MSG/fgmm_lib.h):
* encoding/decoding functions and definitions for common 5GMM IEs

[openair3/NAS/NR_UE/5GS/5GSM](../openair3/NAS/NR_UE/5GS/5GSM):
* encoding and decoding functions for 5GSM NAS messages payloads

# USIM Simulation

OAI includes a simulated USIM implementation that reads its parameters from standard configuration files. This allows for rapid prototyping and testing without relying on a physical UICC card. The USIM-related configuration is handled via the `init_uicc()` function.

## Configuration

The simulation reads values from a named section in the config file.

**Config options in the `uicc` section**:

| Parameter     | Description                       | Default value                              |
|---------------|-----------------------------------|--------------------------------------------|
| `imsi`        | User IMSI                         | `2089900007487`                            |
| `nmc_size`    | Number of digits in NMC           | `2`                                        |
| `key`         | Subscription key (Ki)             | `fec86ba6eb707ed08905757b1bb44b8f`         |
| `opc`         | OPc value                         | `c42449363bbad02b66d16bc975d77cc1`         |
| `amf`         | AMF value                         | `8000`                                     |
| `sqn`         | Sequence number                   | `000000`                                   |
| `dnn`         | Default DNN (APN)                 | `oai`                                      |
| `nssai_sst`   | NSSAI slice/service type          | `1`                                        |
| `nssai_sd`    | NSSAI slice differentiator        | `0xffffff`                                 |
| `imeisv`      | IMEISV string                     | `6754567890123413`                         |

These are parsed and stored in the `uicc_t` structure.

## Initialization

The UE calls `init_uicc` via `checkUicc` to allocate memory for the `uicc_t` structure member and load parameters using `config_get()` from the selected config section. Then the UICC structure is stored in the NAS context. `nr_ue_nas_t`, to be used to fill identity and security credentials when generating responses to 5GC messages such as `Identity Response`, `Authentication Response`, and `Security Mode Complete`.

## Milenage Authentication and Key Derivation

When the UE receives a **5GMM Authentication Request**, the function `generateAuthenticationResp` generates a valid `Authentication Response` with the necessary derived NAS and AS security keys. The function `derive_ue_keys` parses the Authentication Request and performs the entire 5G AKA key hierarchy:

* Extracts the `RAND` and `SQN`
* Performs Milenage Algorithms f2-f5 using `f2345()` from the UICC input
* Computes the `RES` using `transferRES()`
* Derives the keys `KAUSF`, `KSEAF`, `KAMF`, `KNASenc`/`KNASint` via `derive_knas()` and `KGNB` for RRC ciphering (via `derive_kgnb()`)

## Security Mode Complete

When the UE receives a **Security Mode Command** from the 5GC, it responds with a `Security Mode Complete` message. This message is protected with the newly established NAS security context and may carry additional payloads, including the UE’s identity and a nested NAS message (e.g., `Registration Request`) in the `FGSNasMessageContainer`. The function responsible for building and securing this response is `generateSecurityModeComplete`.

### IMEISV

The **IMEISV**, is encoded using the `fill_imeisv()` helper. This function extracts each digit from the configured `imeisvStr` in the UICC context and populates the mobile identity structure.

See TS 24.501 §4.4 for reference.