Jaroslava Fiedlerova
3d5177e5f7
Bugfix for number of PRBs in PUCCH format 2
[TS 38.213 - Section 9.2.1 PUCCH Resource Sets] If the format indicates
PUCCH-format2 or PUCCH-format3, the PUCCH format configured for a PUCCH resource
is PUCCH format 2 or PUCCH format 3, respectively, where the PUCCH resource also
includes a number of PRBs provided by nrofPRBs, a number of symbols for a PUCCH
transmission provided by nrofSymbols, and a first symbol for the PUCCH
transmission provided by startingSymbolIndex.
[TS 38.213 - Section 9.2.3 UE procedure for reporting HARQ-ACK] If a UE transmits
a PUCCH with O_ACK HARQ-ACK information bits and O_CRC bits using PUCCH format 2
or PUCCH format 3 in a PUCCH resource that includes M_PUCCH_RB PRBs, the UE
determines a number of PRBs M_PUCCH_RB_min for the PUCCH transmission to be the
minimum number of PRBs (...)
[TS 38.213 - Section 9.2.5.1 UE procedure for multiplexing HARQ-ACK or CSI and
SR in a PUCCH] If a UE transmits a PUCCH with O_ACK HARQ-ACK information bits,
O_SR = ⌈log2(K+1)⌉ SR bits, and O_CRC CRC bits using PUCCH format 2 or PUCCH
format 3 in a PUCCH resource that includes M_PUCCH_RB PRBs, the UE determines
a number of PRBs M_PUCCH_RB_min for the PUCCH transmission to be the minimum
number of PRBs (...)
[TS 38.213 - Section 9.2.5.2 UE procedure for multiplexing HARQ-ACK/SR/CSI in
a PUCCH] If a UE has HARQ-ACK, SR and wideband or sub-band CSI reports to
transmit and the UE determines a PUCCH resource with PUCCH format 2, or the UE
has HARQ-ACK, SR and wideband CSI reports to transmit and the UE determines a
PUCCH resource with PUCCH format 3 or PUCCH format 4, where (...) the UE
transmits the HARQ-ACK, SR, and CSI reports bits by selecting the minimum number
PUCCH M_PUCCH_RB_min of the M_PUCCH_RB PRBs satisfying (...)
[TS 38.213 - Section 9.2.5.2 UE procedure for multiplexing HARQ-ACK/SR/CSI in a
PUCCH] If a UE has one or more CSI reports and zero or more HARQ-ACK/SR
information bits to transmit in a PUCCH where the HARQ-ACK, if any, is in
response to a PDSCH reception without a corresponding PDCCH; if any of the CSI
reports are overlapping (...); else, the UE transmits the
O_ACK + O_SR + O_CSI + O_CRC bits in a PUCCH resource provided by
pucch-CSI-ResourceList and determined as described in clause 9.2.5
Therefore, the number of PRBs to be used by PUCCH-format2 is M_PUCCH_RB_min,
except if we have zero HARQ-ACK bits, or if we have any HARQ-ACK, is in response
to a PDSCH reception without a corresponding PDCCH. In this case, we must use
the resources indicated in the pucch-CSI-ResourceList and determined as described
in clause 9.2.5.
In OAI, we have:
asn1cSeqAdd(&csirep->reportConfigType.choice.periodic->pucch_CSI_ResourceList.list, pucchcsires);
Where the resource added to the list corresponds to:
pucchres2->pucch_ResourceId = *pucchressetid;
pucchres2->startingPRB = 0;
pucchres2->intraSlotFrequencyHopping = NULL;
pucchres2->secondHopPRB = NULL;
pucchres2->format.present = NR_PUCCH_Resource__format_PR_format2;
pucchres2->format.choice.format2 = calloc(1,sizeof(*pucchres2->format.choice.format2));
pucchres2->format.choice.format2->nrofPRBs = 8;
pucchres2->format.choice.format2->nrofSymbols = 1;
pucchres2->format.choice.format2->startingSymbolIndex = 13;
Currently, in develop branch, we get these prb_size for PUCCH-format2:
[NR_RRC] NGAP_PDUSESSION_SETUP_RESP: sending the message
[NGAP] pdusession_setup_resp_p: pdusession ID 1, gnb_addr 172.31.0.1, SIZE 4, TEID 1579669408
[NR_MAC] (596.3) pucch_pdu->prb_size = 4
[NR_MAC] (596.4) pucch_pdu->prb_size = 3
[NR_MAC] (600.3) pucch_pdu->prb_size = 4
[NR_MAC] (600.4) pucch_pdu->prb_size = 3
[NR_MAC] (604.3) pucch_pdu->prb_size = 4
[NR_MAC] (604.4) pucch_pdu->prb_size = 3
[NR_MAC] (608.3) pucch_pdu->prb_size = 4
While in QXDM we have Num RB = 8, whenever we have zero HARQ-ACK bits:
UCI Request BMask = ACK_NACK_RPT | CSI_RPT
Start symbol = 13
Num Symbols = 1
Starting RB = 0
REL16 DMRS EN = 0
Dual Pol Status = 0
Num RB = 2
Freq Hopping Flag = HOP_MOD_NEITHER
Second Hop RB = NA
Num HARQ ACK Bits = 1
Num SR Bits = 0
Num UCI P1 Bits = 8
UCI Request BMask = ACK_NACK_RPT | CSI_RPT
Start symbol = 13
Num Symbols = 1
Starting RB = 0
REL16 DMRS EN = 0
Dual Pol Status = 0
Num RB = 3
Freq Hopping Flag = HOP_MOD_NEITHER
Second Hop RB = NA
Num HARQ ACK Bits = 3
Num SR Bits = 0
Num UCI P1 Bits = 13
UCI Request BMask = CSI_RPT
Start symbol = 13
Num Symbols = 1
Starting RB = 0
REL16 DMRS EN = 0
Dual Pol Status = 0
Num RB = 8
Freq Hopping Flag = HOP_MOD_NEITHER
Second Hop RB = NA
Num HARQ ACK Bits = 0
Num SR Bits = 0
Num UCI P1 Bits = 10
UCI Request BMask = CSI_RPT | SR_RPT
Start symbol = 13
Num Symbols = 1
Starting RB = 0
REL16 DMRS EN = 0
Dual Pol Status = 0
Num RB = 8
Freq Hopping Flag = HOP_MOD_NEITHER
Second Hop RB = NA
Num HARQ ACK Bits = 0
Num SR Bits = 1
Num UCI P1 Bits = 11
Therefore, this MR fixes the prb_size, so that the number of PUCCH-format2 PRBs matches correctly.
OpenAirInterface License
It is distributed under OAI Public License V1.1.
The license information is distributed under LICENSE file in the same directory.
Please see NOTICE file for third party software that is included in the sources.
Where to Start
- General overview of documentation
- The implemented features
- System Requirements for Using OAI Stack
- How to build
- How to run the modems
Not all information is available in a central place, and information for specific sub-systems might be available in the corresponding sub-directories. To find all READMEs, this command might be handy:
find . -iname "readme*"
RAN repository structure
The OpenAirInterface (OAI) software is composed of the following parts:
openairinterface5g
├── charts
├── ci-scripts : Meta-scripts used by the OSA CI process. Contains also configuration files used day-to-day by CI.
├── CMakeLists.txt : Top-level CMakeLists.txt for building
├── cmake_targets : Build utilities to compile (simulation, emulation and real-time platforms), and generated build files.
├── common : Some common OAI utilities, some other tools can be found at openair2/UTILS.
├── doc : Documentation
├── docker : Dockerfiles to build for Ubuntu and RHEL
├── executables : Top-level executable source files (gNB, eNB, ...)
├── maketags : Script to generate emacs tags.
├── nfapi : (n)FAPI code for MAC-PHY interface
├── openair1 : Layer 1 (3GPP LTE Rel-10/12 PHY, NR Rel-15 PHY)
├── openair2 : Layer 2 (3GPP LTE Rel-10 MAC/RLC/PDCP/RRC/X2AP, LTE Rel-14 M2AP, NR Rel-15+ MAC/RLC/PDCP/SDAP/RRC/X2AP/F1AP/E1AP), E2AP
├── openair3 : Layer 3 (3GPP LTE Rel-10 S1AP/GTP, NR Rel-15 NGAP/GTP)
├── openshift : OpenShift helm charts for some deployment options of OAI
├── radio : Drivers for various radios such as USRP, AW2S, RFsim, 7.2 FHI, ...
├── targets : Some configuration files; only historical relevance, and might be deleted in the future
└── tools : Tools for use by the developers/ci machines: code analysis and formatting
How to get support from the OAI Community
You can ask your question on the mailing lists.
Your email should contain below information:
- A clear subject in your email.
- For all the queries there should be [Query] in the subject of the email and for problems there should be [Problem].
- In case of a problem, add a small description.
- Do not share any photos unless you want to share a diagram.
- OAI gNB/DU/CU/CU-CP/CU-UP configuration file in
.confformat only. - Logs of OAI gNB/DU/CU/CU-CP/CU-UP in
.logor.txtformat only. - In case your question is related to performance, include a small description of the machine (Operating System, Kernel version, CPU, RAM and networking card) and diagram of your testing environment.
- Known/open issues are present on GitLab, so keep checking.
Always remember a structured email will help us understand your issues quickly.