Robert Schmidt
433bd7be3f
Synchronize multiple gNBs by aligning the slot boundaries
Currently, we derive frame and slot number based on proc->timestamp_rx
using
proc->frame_rx = (proc->timestamp_rx / (fp->samples_per_subframe*10))&1023;
proc->tti_rx = get_slot_from_timestamp(proc->timestamp_rx, fp);
This ignores the samples
proc->timestamp_rx % fp->samples_per_frame
while computing the frame and slot number creating a mis-alignment with
the slot boundaries. A detailed description of the slot misalignment
in a pictorial representation can be seen in an attachment in the MR [1].
We fix this alignment issue by compensating these samples during the
first reception.
We can test the synchronization of the multiple gNBs from the estimated
ToAs from the PRS in the Downlink and the estimated ToAs from the SRS in
the Uplink using rfsim.
In order to test this, make sure you build gNB and nrUE along with the
telnetsrv flag using the option --build-lib telnetsrv.
Also, enable the following log in the function
nr_est_srs_timing_advance_offset() in
openair1/PHY/NR_ESTIMATION/nr_measurements_gNB.c to observe SRS ToAs
LOG_I(NR_PHY, "SRS estimatd ToA %d [RX ant %d]: TA offset %d, TA offset ns %d (max_val %ld, mean_val %ld, max_idx %d)\n", srs_toa, ant, *ta_offset, *ta_offset_nsec, max_val, mean_val, max_idx);
Furthermore, update the option Active_gNBs = 2; in
targets/PROJECTS/GENERIC-NR-5GC/CONF/ue.nr.prs.fr1.106prb.conf to enable
decoding PRS transmitted from two gNBs
To run:
nrUE:
sudo ./nr-uesoftmodem -r 106 --numerology 1 --band 78 -C 3619200000 --uicc0.imsi 001010000000001 --rfsim --phy-test -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/ue.nr.prs.fr1.106prb.conf --rfsimulator.serveraddr server
gNB 0:
sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb0.prs.band78.fr1.106PRB.usrpx310.conf --gNBs.[0].min_rxtxtime 6 --rfsim --phy-test --rfsimulator.[0].serveraddr 127.0.0.1 --rfsimulator.[0].options chanmod --rfsimulator.[0].modelname AWGN --telnetsrv
gNB 1:
sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb1.prs.band78.fr1.106PRB.usrpx310.conf --gNBs.[0].min_rxtxtime 6 --rfsim --phy-test --rfsimulator.[0].serveraddr 127.0.0.1 --rfsimulator.[0].options chanmod --rfsimulator.[0].modelname AWGN --telnetsrv
When we run the nrUE, gNB0 and gNB1, we can see the following logs
nrUE:
[PHY] [gNB 0][rsc 0][Rx 0][sfn 976][slot 2] DL PRS ToA ==> 0.0 / 2048 samples, peak channel power -16.4 dBm, SNR +4.0 dB, rsrp -42.2 dBm
[PHY] [gNB 1][rsc 0][Rx 0][sfn 976][slot 3] DL PRS ToA ==> 0.0 / 2048 samples, peak channel power -16.4 dBm, SNR +4.0 dB, rsrp -42.2 dBm
gNB 0:
[NR_PHY] SRS estimatd ToA 0 [RX ant 0]: TA offset 31, TA offset ns 0 (max_val 99820162, mean_val 80176, max_idx 0)
gNB 1:
[NR_PHY] SRS estimatd ToA 0 [RX ant 0]: TA offset 31, TA offset ns 0 (max_val 98784562, mean_val 79369, max_idx 0)
From the above logs, when we run the rfsim and when no delays introduced, we can observe the following results
In the Downlink at the UE, the estimated ToAs using PRS from both gNB0
and gNB1 are 0 and in the uplink, the ToA estimated from the SRS
transmitted by the UE at both the gNBs are also 0. This indicates that
both the gNBs are synchronized along with their slot boundaries. We also
highlight that this is not the case in the current develop branch since
the slot boundaries are not aligned.
We also can test the multi gNB synchronization by introducing delays
using telnet as follows,
Introduce new_offset (delay) of 4 samples to the gNB 0 from UE in the
uplink as follows,
openairinterface5g$ echo rfsimu setdistance rfsimu_channel_enB0 20 | ncat --idle 1 127.0.0.80 9080
softmodem_gnb> rfsimu_setdistance_cmd: new_offset 4, new (exact) distance 19.518 m, new delay 0.000065 ms
Ncat: Idle timeout expired (1000 ms).
We can oberve this delay of 4 samples being reflected in the estimated
SRS ToAs at gNB 0 while not changing the ToA in gNB 1
[NR_PHY] SRS estimatd ToA 4 [RX ant 0]: TA offset 31, TA offset ns 65 (max_val 98803636, mean_val 79430, max_idx 8)
similarly, Introduce new_offset (delay) of 2 samples to the gNB 1 from
UE in the uplink as follows,
openairinterface5g$ echo rfsimu setdistance rfsimu_channel_enB0 10 | ncat --idle 1 127.0.0.81 9081
softmodem_gnb> rfsimu_setdistance_cmd: new_offset 2, new (exact) distance 9.759 m, new delay 0.000033 ms
Ncat: Idle timeout expired (1000 ms).
We can oberve this delay of 2 samples being reflected in the estimated
SRS ToAs at gNB 1 while not changing the ToA in gNB 0
[NR_PHY] SRS estimatd ToA 2 [RX ant 0]: TA offset 31, TA offset ns 32 (max_val 98962768, mean_val 79552, max_idx 4)
Closes #897
[1] https://gitlab.eurecom.fr/oai/openairinterface5g/-/merge_requests/3892
OpenAirInterface License
It is distributed under OAI Public License V1.1.
The license information is distributed under LICENSE file in the same directory.
Please see NOTICE file for third party software that is included in the sources.
Where to Start
- General overview of documentation
- The implemented features
- System Requirements for Using OAI Stack
- How to build
- How to run the modems
Not all information is available in a central place, and information for specific sub-systems might be available in the corresponding sub-directories. To find all READMEs, this command might be handy:
find . -iname "readme*"
RAN repository structure
The OpenAirInterface (OAI) software is composed of the following parts:
openairinterface5g
├── charts
├── ci-scripts : Meta-scripts used by the OSA CI process. Contains also configuration files used day-to-day by CI.
├── CMakeLists.txt : Top-level CMakeLists.txt for building
├── cmake_targets : Build utilities to compile (simulation, emulation and real-time platforms), and generated build files.
├── common : Some common OAI utilities, some other tools can be found at openair2/UTILS.
├── doc : Documentation
├── docker : Dockerfiles to build for Ubuntu and RHEL
├── executables : Top-level executable source files (gNB, eNB, ...)
├── maketags : Script to generate emacs tags.
├── nfapi : (n)FAPI code for MAC-PHY interface
├── openair1 : Layer 1 (3GPP LTE Rel-10/12 PHY, NR Rel-15 PHY)
├── openair2 : Layer 2 (3GPP LTE Rel-10 MAC/RLC/PDCP/RRC/X2AP, LTE Rel-14 M2AP, NR Rel-15+ MAC/RLC/PDCP/SDAP/RRC/X2AP/F1AP/E1AP), E2AP
├── openair3 : Layer 3 (3GPP LTE Rel-10 S1AP/GTP, NR Rel-15 NGAP/GTP)
├── openshift : OpenShift helm charts for some deployment options of OAI
├── radio : Drivers for various radios such as USRP, AW2S, RFsim, 7.2 FHI, ...
├── targets : Some configuration files; only historical relevance, and might be deleted in the future
└── tools : Tools for use by the developers/ci machines: code analysis and formatting
How to get support from the OAI Community
You can ask your question on the mailing lists.
Your email should contain below information:
- A clear subject in your email.
- For all the queries there should be [Query] in the subject of the email and for problems there should be [Problem].
- In case of a problem, add a small description.
- Do not share any photos unless you want to share a diagram.
- OAI gNB/DU/CU/CU-CP/CU-UP configuration file in
.confformat only. - Logs of OAI gNB/DU/CU/CU-CP/CU-UP in
.logor.txtformat only. - In case your question is related to performance, include a small description of the machine (Operating System, Kernel version, CPU, RAM and networking card) and diagram of your testing environment.
- Known/open issues are present on GitLab, so keep checking.
Always remember a structured email will help us understand your issues quickly.