maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
51b5fcd4896ebbcc20fc17ff12ebc5863243993b
openairinterface5g/cmake_targets/build_oai
T
Frédéric Leroy 34801af904 build_oai: exit early on error 
There are a lot of case where the build scripts fails. Despite this, the
build script happily continue to the end and tells "Successfully built
xxxx".
This fix ensure the build stops early with the first error message on the
bottom of the log.
2016-06-14 13:55:25 +02:00

805 lines
27 KiB
Bash
Executable File
Raw Blame History

#!/bin/bash
################################################################################
#
# Copyright (c) 2015, EURECOM (www.eurecom.fr)
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# 1. Redistributions of source code must retain the above copyright notice, this
# list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright notice,
# this list of conditions and the following disclaimer in the documentation
# and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# The views and conclusions contained in the software and documentation are those
# of the authors and should not be interpreted as representing official policies,
# either expressed or implied, of the FreeBSD Project.
#
################################################################################
# file build_oai
# brief OAI automated build tool that can be used to install, compile, run OAI.
# author Navid Nikaein, Lionel GAUTHIER, Laurent Thomas
set -e
################################
# include helper functions
################################
ORIGIN_PATH=$PWD
THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
source $THIS_SCRIPT_PATH/tools/build_helper
MSC_GEN="False"
XFORMS="True"
PRINT_STATS="False"
VCD_TIMING="False"
DEADLINE_SCHEDULER_FLAG_USER="False"
FORCE_DEADLINE_SCHEDULER_FLAG_USER=""
CPU_AFFINITY_FLAG_USER="True" #Only valid when lowlatecy flag is set to False
REL="Rel10"
HW="None"
TP="None"
NOS1=0
EPC=0
VERBOSE_COMPILE=0
CFLAGS_PROCESSOR_USER=""
RUN_GROUP=0
TEST_CASE_GROUP=""
BUILD_DOXYGEN=0
T_TRACER="False"
trap handle_ctrl_c INT
function print_help() {
echo_info '
This program installs OpenAirInterface Software
You should have ubuntu 14.xx, updated, and the Linux kernel >= 3.14
Options
-h
This help
-c | --clean
Erase all files to make a rebuild from start"
-C | --clean-all
Erase all files made by previous compilations, installations"
--clean-kernel
Erase previously installed features in kernel: iptables, drivers, ...
-I | --install-external-packages
Installs required packages such as LibXML, asn1.1 compiler, freediameter, ...
This option will require root password
--install-optional-packages
Install useful but not mandatory packages such as valgrind
-g | --run-with-gdb
Add debugging symbols to compilation directives
-h | --help
Print this help
--eNB
Makes the LTE softmodem
--UE
Makes the UE specific parts (ue_ip, usim, nvram)
--RRH
Makes the RRH
-r | --3gpp-release
default is Rel10,
Rel8 limits the implementation to 3GPP Release 8 version
-w | --hardware
EXMIMO, USRP, BLADERF, ETHERNET, LMSSDR, None (Default)
Adds this RF board support (in external packages installation and in compilation)
-t | --transport protocol
ETHERNET , None
Adds this trasport protocol support in compilation
--oaisim
Makes the oaisim simulator. Hardware will be defaulted to "None".
--phy_simulators
Makes the unitary tests Layer 1 simulators
--core_simulators
Makes the core security features unitary simulators
-s | --check
runs a set of auto-tests based on simulators and several compilation tests
--run-group
runs only specified test cases specified here. This flag is only valid with -s
-V | --vcd
Adds a debgging facility to the binary files: GUI with major internal synchronization events
-x | --xforms
Adds a software oscilloscope feature to the produced binaries. If oaisim, then enable PRINT_STATS.
--install-system-files
Install OpenArInterface required files in Linux system
(will ask root password)
--noS1
Compiles oaisim or lte-softmodem without S1 interface, using direct link to IP instead
--verbose-compile
Shows detailed compilation instructions in makefile
--cflags_processor
Manually Add CFLAGS of processor if they are not detected correctly by script. Only add these flags if you know your processor supports them. Example flags: -msse3 -msse4.1 -msse4.2 -mavx2
--build-doxygen
Builds doxygen based documentation.
--disable-deadline
Disables deadline scheduler of Linux kernel (>=3.14.x).
--enable-deadline
Enable deadline scheduler of Linux kernel (>=3.14.x).
--disable-cpu-affinity
Disables CPU Affinity between UHD/TX/RX Threads (Valid only when deadline scheduler is disabled). By defaulT, CPU Affinity is enabled when not using deadline scheduler. It is enabled only with >2 CPUs. For eNB, CPU_0-> Device library (UHD), CPU_1->TX Threads, CPU_2...CPU_MAX->Rx Threads. For UE, CPU_0->Device Library(UHD), CPU_1..CPU_MAX -> All the UE threads
--T-tracer
Enables the T tracer.
Usage (first build):
oaisim (eNB + UE): ./build_oai -I -g --oaisim -x --install-system-files
Eurecom EXMIMO + COTS UE : ./build_oai -I -g --eNB -x --install-system-files
NI/ETTUS B201 + COTS UE : ./build_oai -I -g --eNB -x --install-system-files -w USRP
Usage (Regular):
oaisim : ./build_oai --oaisim -x
Eurecom EXMIMO + OAI ENB : ./build_oai --eNB -x
NI/ETTUS B201 + OAI ENB : ./build_oai --eNB -x -w USRP'
}
function main() {
until [ -z "$1" ]
do
case "$1" in
-c | --clean)
CLEAN=1
shift;;
-C | --clean-all)
CLEAN_ALL=1
shift;;
--clean-kernel)
clean_kernel
echo_info "Erased iptables config and removed modules from kernel"
shift;;
-I | --install-external-packages)
INSTALL_EXTERNAL=1
echo_info "Will install external packages"
shift;;
--install-optional-packages)
INSTALL_OPTIONAL=1
echo_info "Will install optional packages"
shift;;
-g | --run-with-gdb)
GDB=1
echo_info "Will Compile with gdb symbols"
shift;;
--eNB)
eNB=1
echo_info "Will compile eNB"
shift;;
--UE)
UE=1
echo_info "Will compile UE"
shift;;
--RRH)
RRH=1
echo_info "Will compile RRH"
shift;;
-r | --3gpp-release)
REL=$2
echo_info "Setting release to: $REL"
shift 2;;
-w | --hardware)
HW="$2" #"${i#*=}"
# Use OAI_USRP as the key word USRP is used inside UHD driver
if [ "$HW" != "BLADERF" -a "$HW" != "USRP" -a "$HW" != "LMSSDR" -a "$HW" != "None" -a "$HW" != "EXMIMO" ] ; then
echo_fatal "Unknown HW type $HW will exit..."
else
if [ "$HW" == "USRP" ] ; then
HW="OAI_USRP"
fi
if [ "$HW" == "BLADERF" ] ; then
HW="OAI_BLADERF"
fi
if [ "$HW" == "LMSSDR" ] ; then
HW="OAI_LMSSDR"
fi
echo_info "Setting hardware to: $HW"
fi
shift 2;;
-t | --transport_protocol)
TP="$2" #"${i#*=}"
if [ "$TP" != "ETHERNET" -a "$TP" != "None" ] ; then
echo_fatal "Unknown TP type $TP will exit..."
else
echo_info "Setting transport protocol to: $TP"
fi
shift 2;;
--oaisim)
oaisim=1
echo_info "Will compile oaisim and drivers nasmesh, ..."
shift;;
--phy_simulators)
SIMUS_PHY=1
echo_info "Will compile dlsim, ulsim, ..."
shift;;
--core_simulators)
SIMUS_CORE=1
echo_info "Will compile security unitary tests"
shift;;
-s | --check)
OAI_TEST=1
echo_info "Will run auto-tests"
shift;;
--run-group)
RUN_GROUP=1
TEST_CASE_GROUP=$2
echo_info "executing test cases only in group: $TEST_CASE_GROUP"
shift 2;;
-V | --vcd)
echo_info "Setting gtk-wave output"
VCD_TIMING=1
EXE_ARGUMENTS="$EXE_ARGUMENTS -V"
shift;;
-x | --xforms)
XFORMS="True"
EXE_ARGUMENTS="$EXE_ARGUMENTS -d"
echo_info "Will generate the software oscilloscope features"
shift;;
--install-system-files)
INSTALL_SYSTEM_FILES=1
echo_info "Will copy OpenAirInterface files in Linux directories"
shift;;
--noS1)
NOS1=1
echo_info "Will compile without S1 interface"
shift;;
--verbose-compile)
VERBOSE_COMPILE=1
echo_info "Will compile with verbose instructions"
shift;;
--cflags_processor)
CFLAGS_PROCESSOR_USER=$2
echo_info "Setting CPU FLAGS from USER to: $CFLAGS_PROCESSOR_USER"
shift 2;;
--build-doxygen)
BUILD_DOXYGEN=1
echo_info "Will build doxygen support"
shift;;
--disable-deadline)
FORCE_DEADLINE_SCHEDULER_FLAG_USER="False"
echo_info "Disabling the usage of deadline scheduler"
shift 1;;
--enable-deadline)
FORCE_DEADLINE_SCHEDULER_FLAG_USER="True"
echo_info "Enabling the usage of deadline scheduler"
shift 1;;
--disable-cpu-affinity)
CPU_AFFINITY_FLAG_USER="False"
echo_info "Disabling CPU Affinity (only valid when not using deadline scheduler)"
shift 1;;
--T-tracer)
T_TRACER="True"
echo_info "Enabling the T tracer"
shift 1;;
-h | --help)
print_help
exit 1;;
*)
print_help
echo_fatal "Unknown option $1"
break;;
esac
done
#########################################################
# check validity of HW and TP parameters for RRH and eNB
#########################################################
# to be discussed
if [ "$eNB" = "1" ] ; then
if [ "$HW" = "None" -a "$TP" = "None" ] ; then
echo_fatal "Define a local radio head (e.g. -w EXMIMO) or a transport protocol (e.g. -t ETHERNET) to communicate with a remote radio head!"
fi
if [ "$HW" != "None" -a "$TP" != "None" ] ; then
echo_fatal "Currently eNB can not support simultaniously local and remote radio heads!!"
fi
if [ "$HW" = "None" ] ; then
echo_info "No radio head has been selected (HW set to $HW)"
fi
if [ "$TP" = "None" ] ; then
echo_info "No transport protocol has been selected (TP set to $TP)"
fi
fi
if [ "$RRH" = "1" ] ; then
if [ "$TP" = "None" ] ; then
echo_fatal "A transport protocol (e.g. -t ETHERNET) must be defined!"
fi
if [ "$HW" = "None" ] ; then
echo_info "No radio head has been selected (HW set to $HW)"
fi
fi
echo_info "RF HW set to $HW"
#Now we set flags to enable deadline scheduler settings
#By default: USRP: disable,
#By default: BLADERF: enable,
#By default: EXMIMO: enable
if [ "$FORCE_DEADLINE_SCHEDULER_FLAG_USER" = "" ]; then
if [ "$HW" = "EXMIMO" ] ; then
DEADLINE_SCHEDULER_FLAG_USER="False"
elif [ "$HW" = "ETHERNET" ] ; then
DEADLINE_SCHEDULER_FLAG_USER="True"
elif [ "$HW" = "OAI_USRP" ] ; then
DEADLINE_SCHEDULER_FLAG_USER="False"
elif [ "$HW" = "OAI_BLADERF" ] ; then
DEADLINE_SCHEDULER_FLAG_USER="False"
elif [ "$HW" = "OAI_LMSSDR" ] ; then
DEADLINE_SCHEDULER_FLAG_USER="False"
elif [ "$HW" = "None" ] ; then
DEADLINE_SCHEDULER_FLAG_USER="False"
else
echo_error "Unknown HW type $HW. Exiting now..."
exit
fi
else
DEADLINE_SCHEDULER_FLAG_USER=$FORCE_DEADLINE_SCHEDULER_FLAG_USER
fi
#Disable CPU Affinity for deadline scheduler
if [ "$DEADLINE_SCHEDULER_FLAG_USER" = "True" ] ; then
CPU_AFFINITY_FLAG_USER="False"
fi
echo_info "Flags for Deadline scheduler: $DEADLINE_SCHEDULER_FLAG_USER"
echo_info "Flags for CPU Affinity: $CPU_AFFINITY_FLAG_USER"
############################################
# setting and printing OAI envs, we should check here
############################################
echo_info "2. Setting the OAI PATHS ..."
set_openair_env
cecho "OPENAIR_DIR = $OPENAIR_DIR" $green
# for conf files copy in this bash script
if [ -d /usr/lib/freeDiameter ]; then
export FREEDIAMETER_PREFIX=/usr
else
if [ -d /usr/local/lib/freeDiameter ]; then
export FREEDIAMETER_PREFIX=/usr/local
else
echo_warning "FreeDiameter prefix not found, install freeDiameter if EPC, HSS"
fi
fi
if [ "$CLEAN_ALL" = "1" ] ; then
clean_all_files
echo_info "Erased all previously producted files"
fi
dbin=$OPENAIR_DIR/targets/bin
dlog=$OPENAIR_DIR/cmake_targets/log
mkdir -p $dbin $dlog
if [ "$INSTALL_EXTERNAL" = "1" ] ; then
echo_info "Installing packages"
check_install_oai_software
if [ "$HW" == "OAI_USRP" ] ; then
echo_info "installing packages for USRP support"
check_install_usrp_uhd_driver
fi
if [ "$HW" == "OAI_BLADERF" ] ; then
echo_info "installing packages for BLADERF support"
check_install_bladerf_driver
fi
fi
if [ "$INSTALL_OPTIONAL" = "1" ] ; then
echo_info "Installing optional packages"
check_install_additional_tools
fi
if [ "$oaisim" = "1" ] ; then
#to be discussed
# there is no RF device and no transport protocol
HW="None"
TP="None"
if [ "$XFORMS" == "True" ] ; then
PRINT_STATS="True"
fi
fi
echo_info "3. building the compilation directives ..."
DIR=$OPENAIR_DIR/cmake_targets
if [ "$NOS1" = "1" ] ; then
lte_build_dir=lte_noS1_build_oai
lte_exec=lte-softmodem-nos1
else
lte_build_dir=lte_build_oai
lte_exec=lte-softmodem
fi
# first generate the CMakefile in the right directory
if [ "$eNB" = "1" -o "$UE" = "1" -o "$HW" = "EXMIMO" ] ; then
# LTE softmodem compilation
[ "$CLEAN" = "1" ] && rm -rf $DIR/$lte_build_dir/build
mkdir -p $DIR/$lte_build_dir/build
cmake_file=$DIR/$lte_build_dir/CMakeLists.txt
echo "cmake_minimum_required(VERSION 2.8)" > $cmake_file
if [ "$NOS1" = "1" ] ; then
cat $DIR/$lte_build_dir/CMakeLists.template >> $cmake_file
fi
echo "set ( CFLAGS_PROCESSOR_USER \"$CFLAGS_PROCESSOR_USER\" )" >> $cmake_file
echo "set ( XFORMS $XFORMS )" >> $cmake_file
echo "set ( RRC_ASN1_VERSION \"${REL}\")" >> $cmake_file
echo "set ( ENABLE_VCD_FIFO $VCD_TIMING )" >> $cmake_file
echo "set ( RF_BOARD \"${HW}\")" >> $cmake_file
echo "set ( TRANSP_PRO \"${TP}\")" >> $cmake_file
echo "set(PACKAGE_NAME \"${lte_exec}\")" >> $cmake_file
echo "set (DEADLINE_SCHEDULER \"${DEADLINE_SCHEDULER_FLAG_USER}\" )" >>$cmake_file
echo "set (CPU_AFFINITY \"${CPU_AFFINITY_FLAG_USER}\" )" >>$cmake_file
echo "set ( T_TRACER $T_TRACER )" >> $cmake_file
echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)' >> $cmake_file
cd $DIR/$lte_build_dir/build
cmake ..
fi
if [ "$eNB" = "1" -o "$UE" = "1" ] ; then
echo_info "Compiling $lte_exec"
compilations \
$lte_build_dir $lte_exec \
$lte_exec $dbin/$lte_exec.$REL
if [ "$NOS1" = "1" ] ; then
compilations \
$lte_build_dir nasmesh \
CMakeFiles/nasmesh/nasmesh.ko $dbin/nasmesh.ko
compilations \
$lte_build_dir rb_tool \
rb_tool $dbin/rb_tool
cp $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $dbin
fi
fi
if [ "$UE" = 1 -a "$NOS1" = "0" ] ; then
# ue_ip driver compilation
echo_info "Compiling UE specific part"
compilations \
$lte_build_dir ue_ip \
CMakeFiles/ue_ip/ue_ip.ko $dbin/ue_ip.ko
# mkdir -p $DIR/at_commands/build
# cd $DIR/at_commands/build
# cmake ..
# compilations \
# at_commands at_nas_ue \
# at_nas_ue $dbin/at_nas_ue
[ "$CLEAN" = "1" ] && rm -rf $DIR/nas_sim_tools/build
mkdir -p $DIR/nas_sim_tools/build
cd $DIR/nas_sim_tools/build
cmake ..
compilations \
nas_sim_tools usim \
usim $dbin/usim
compilations \
nas_sim_tools nvram \
nvram $dbin/nvram
# generate USIM data
if [ -f $dbin/nvram ]; then
install_nas_tools $dbin $dconf
echo_info "Copying UE specific part to $DIR/$lte_build_dir/build"
cp -Rvf $dbin/.ue_emm.nvram $DIR/$lte_build_dir/build
cp -Rvf $dbin/.ue.nvram $DIR/$lte_build_dir/build
cp -Rvf $dbin/.usim.nvram $DIR/$lte_build_dir/build
else
echo_warning "not generated UE NAS files: binaries not found"
fi
fi
if [ "$SIMUS_PHY" = "1" -o "$SIMUS_CORE" = "1" ] ; then
cd $OPENAIR_DIR/cmake_targets/lte-simulators
[ "$CLEAN" = "1" ] && rm -rf build
mkdir -p build
cd build
rm -f *sim
cmake ..
fi
if [ "$SIMUS_PHY" = "1" ] ; then
# lte unitary simulators compilation
echo_info "Compiling unitary tests simulators"
simlist="dlsim ulsim pucchsim prachsim pdcchsim pbchsim mbmssim"
for f in $simlist ; do
compilations \
lte-simulators $f \
$f $dbin/$f.$REL
done
fi
# Core simulators
#############
if [ "$SIMUS_CORE" = "1" ] ; then
# lte unitary simulators compilation
echo_info "Compiling unitary tests simulators"
simlist="secu_knas_encrypt_eia1 secu_kenb aes128_ctr_encrypt aes128_ctr_decrypt secu_knas_encrypt_eea2 secu_knas secu_knas_encrypt_eea1 kdf aes128_cmac_encrypt secu_knas_encrypt_eia2"
for f in $simlist ; do
compilations \
lte-simulators test_$f \
test_$f $dbin/test_$f.$REL
done
fi
# EXMIMO drivers & firmware loader
###############
if [ "$HW" = "EXMIMO" ] ; then
echo_info "Compiling Express MIMO 2 board drivers"
compilations \
$lte_build_dir openair_rf \
CMakeFiles/openair_rf/openair_rf.ko $dbin/openair_rf.ko
compilations \
$lte_build_dir updatefw \
updatefw $dbin/updatefw
make -C $OPENAIR_DIR/cmake_targets/$lte_build_dir/build oarf > $dlog/oarf.txt 2>&1
cp $OPENAIR_DIR/cmake_targets/$lte_build_dir/build/*.oct $dbin
if [ -s $dbin/oarf_config_exmimo.oct ] ; then
echo_success "oarf tools compiled"
else
echo_error "oarf tools compilation failed"
fi
cp $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 $dbin
fi
if [ "$oaisim" = "1" ] ; then
dconf=$OPENAIR_DIR/targets/bin
if [ "$NOS1" = "1" ] ; then
oaisim_build_dir=oaisim_noS1_build_oai
oaisim_exec=oaisim_nos1
else
oaisim_build_dir=oaisim_build_oai
oaisim_exec=oaisim
fi
echo_info "Compiling $oaisim_exec ($oaisim_build_dir)"
cmake_file=$DIR/$oaisim_build_dir/CMakeLists.txt
cp $DIR/$oaisim_build_dir/CMakeLists.template $cmake_file
echo "set ( CFLAGS_PROCESSOR_USER \"$CFLAGS_PROCESSOR_USER\" )" >> $cmake_file
echo "set ( XFORMS $XFORMS )" >> $cmake_file
echo "set ( PRINT_STATS $PRINT_STATS )" >> $cmake_file
echo "set ( RRC_ASN1_VERSION \"${REL}\")" >> $cmake_file
echo "set ( ENABLE_VCD_FIFO $VCD_TIMING )" >> $cmake_file
echo "set ( T_TRACER $T_TRACER )" >> $cmake_file
echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)' >> $cmake_file
[ "$CLEAN" = "1" ] && rm -rf $DIR/$oaisim_build_dir/build
mkdir -p $DIR/$oaisim_build_dir/build
cd $DIR/$oaisim_build_dir/build
cmake ..
compilations \
$oaisim_build_dir $oaisim_exec \
$oaisim_exec $dbin/$oaisim_exec.$REL
if [ "$NOS1" != "1" ] ; then
[ "$CLEAN" = "1" ] && rm -rf $DIR/at_commands/build
echo_info "Compiling at_nas_ue"
mkdir -p $DIR/at_commands/build
cd $DIR/at_commands/build
cmake ..
compilations \
at_commands at_nas_ue \
at_nas_ue $dbin/at_nas_ue
# ue_ip driver compilation
echo_info "Compiling UE specific part (ue_ip driver and usim tools)"
compilations \
oaisim_build_oai ue_ip \
CMakeFiles/ue_ip/ue_ip.ko $dbin/ue_ip.ko
[ "$CLEAN" = "1" ] && rm -rf $DIR/nas_sim_tools/build
mkdir -p $DIR/nas_sim_tools/build
cd $DIR/nas_sim_tools/build
cmake ..
compilations \
nas_sim_tools usim \
usim $dbin/usim
compilations \
nas_sim_tools nvram \
nvram $dbin/nvram
# generate USIM data
if [ -f $dbin/nvram ]; then
install_nas_tools $dbin $dconf
else
echo_warning "not generated UE NAS files: binaries not found"
fi
else
compilations \
$oaisim_build_dir rb_tool \
rb_tool $dbin/rb_tool
# nasmesh driver compilation
compilations \
$oaisim_build_dir nasmesh \
CMakeFiles/nasmesh/nasmesh.ko $dbin/nasmesh.ko
#oai_nw_drv
compilations \
$oaisim_build_dir oai_nw_drv \
CMakeFiles/oai_nw_drv/oai_nw_drv.ko $dbin/oai_nw_drv.ko
fi
cmake_file=$DIR/oaisim_mme_build_oai/CMakeLists.txt
cp $DIR/oaisim_mme_build_oai/CMakeLists.template $cmake_file
echo "set(XFORMS $XFORMS )" >> $cmake_file
echo "set(RRC_ASN1_VERSION \"${REL}\")" >> $cmake_file
echo "set(ENABLE_VCD_FIFO $VCD_TIMING )" >> $cmake_file
echo "set ( T_TRACER $T_TRACER )" >> $cmake_file
echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)' >> $cmake_file
#[ "$CLEAN" = "1" ] && rm -rf $DIR/oaisim_mme_build_oai/build
#mkdir -p $DIR/oaisim_mme_build_oai/build
#cd $DIR/oaisim_mme_build_oai/build
#cmake ..
#compilations \
# oaisim_mme_build_oai oaisim_mme \
# oaisim_mme $dbin/oaisim_mme.$REL
fi
# RRH compilation
#####################
if [ "$RRH" = "1" ] ; then
rrh_exec=rrh_gw
rrh_build_dir=rrh_gw
echo_info "Compiling $rrh_exec ..."
[ "$CLEAN" = "1" ] && rm -rf $DIR/rrh_gw/build
mkdir -p $DIR/$rrh_build_dir/build
cmake_file=$DIR/$rrh_build_dir/CMakeLists.txt
echo "cmake_minimum_required(VERSION 2.8)" > $cmake_file
echo "set(ENABLE_VCD_FIFO $VCD_TIMING )" >> $cmake_file
echo "set(ENABLE_ITTI False )" >> $cmake_file
echo "set(RF_BOARD \"${HW}\")" >> $cmake_file
echo "set(TRANSP_PRO \"${TP}\")" >> $cmake_file
echo 'set(PACKAGE_NAME "\"rrh_gw\"")' >> $cmake_file
echo "set (DEADLINE_SCHEDULER \"${DEADLINE_SCHEDULER_FLAG_USER}\" )" >>$cmake_file
echo "set (CPU_AFFINITY \"${CPU_AFFINITY_FLAG_USER}\" )" >>$cmake_file
echo "set ( T_TRACER $T_TRACER )" >> $cmake_file
echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)' >> $cmake_file
cd $DIR/$rrh_build_dir/build
cmake ..
compilations \
rrh_gw rrh_gw \
rrh_gw $dbin/rrh_gw
fi
# build RF device and transport protocol libraries
#####################################
if [ "$eNB" = "1" -o "$RRH" = "1" ] ; then
if [ "$eNB" = "1" ] ; then
build_dir=$lte_build_dir
else
build_dir=$rrh_build_dir
fi
# build RF device libraries (currently EXMIMO is not complied with the rest of HW targets)
if [ "$HW" != "None" ] ; then
rm -f liboai_device.so
rm -f $dbin/liboai_device.so
# link liboai_device.so with the selected RF device library
if [ "$HW" == "EXMIMO" ] ; then
#add exmimo compilation
#TODO EXMIMO library support
echo_info "liboai_device.so is linked to EXMIMO device library"
elif [ "$HW" == "OAI_USRP" ] ; then
if [ -d "/usr/include/uhd" ] ; then
compilations \
$build_dir oai_usrpdevif \
liboai_usrpdevif.so $dbin/liboai_usrpdevif.so.$REL
fi
ln -s liboai_usrpdevif.so liboai_device.so
ln -s $dbin/liboai_usrpdevif.so.$REL $dbin/liboai_device.so
echo_info "liboai_device.so is linked to USRP device library"
elif [ "$HW" == "OAI_BLADERF" ] ; then
if [ -f "/usr/include/libbladeRF.h" ] ; then
compilations \
$build_dir oai_bladerfdevif \
liboai_bladerfdevif.so $dbin/liboai_bladerfdevif.so.$REL
fi
ln -s liboai_bladerfdevif.so liboai_device.so
ln -s $dbin/liboai_bladerfdevif.so.$REL $dbin/liboai_device.so
echo_info "liboai_device.so is linked to BLADERF device library"
elif [ "$HW" == "OAI_LMSSDR" ] ; then
# if [ -f "/usr/include/libbladeRF.h" ] ; then
compilations \
$build_dir oai_lmssdrdevif \
liboai_lmssdrdevif.so $dbin/liboai_lmssdrdevif.so.$REL
# fi
ln -s liboai_lmssdrdevif.so liboai_device.so
ln -s $dbin/liboai_lmssdrdevif.so.$REL $dbin/liboai_device.so
echo_info "liboai_device.so is linked to LMSSDR device library"
else
echo_info "liboai_device.so is not linked to any device library"
fi
fi
# build trasport protocol libraries (currently only ETHERNET is available)
if [ "$TP" != "None" ] ; then
rm -f liboai_transpro.so
rm -f $dbin/liboai_transpro.so
if [ "$TP" == "ETHERNET" ] ; then
compilations \
$build_dir oai_eth_transpro \
liboai_eth_transpro.so $dbin/liboai_eth_transpro.so.$REL
ln -s liboai_eth_transpro.so liboai_transpro.so
ln -s $dbin/liboai_eth_transpro.so.$REL $dbin/liboai_transpro.so
echo_info "liboai_transpro.so is linked with ETHERNET library"
fi
fi
fi
# Doxygen Support
#####################
if [ "$BUILD_DOXYGEN" = "1" ] ;then
doxygen_log=$OPENAIR_DIR/cmake_targets/log/doxygen.log
echo_info "Building doxygen based documentation. The documentation file is located here: $OPENAIR_DIR/targets/DOCS/html/index.html"
echo_info "Doxygen Generation log is located here: $doxygen_log"
echo_info "Generating doxygen files....please wait"
(
[ "$CLEAN" = "1" ] && rm -rf $OPENAIR_DIR/cmake_targets/doxygen/build
mkdir -p $OPENAIR_DIR/cmake_targets/doxygen/build
cd $OPENAIR_DIR/cmake_targets/doxygen/build
cmake ..
make doc
) >& $doxygen_log
fi
# Auto-tests
#####################
if [ "$OAI_TEST" = "1" ]; then
echo_info "10. Running OAI pre commit tests (pre-ci) ..."
echo_error "These scripts ASSUME that user is in /etc/sudoers and can execute commands without PASSWORD prompt"
echo_error "Add the following lines in /etc/sudoers file to make your __user_name__ sudo without password prompt"
echo_error " __your_user_name__ ALL = (ALL:ALL) NOPASSWD: ALL"
echo_error " __your_user_name__ ALL = (ALL) NOPASSWD: ALL "
echo_info "The log file for the autotest script for debugging is located here: $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log "
echo_info "The results of autotests results is located here: $OPENAIR_DIR/cmake_targets/autotests/log/results_autotests.xml "
echo_info "You can hit CTRL-C any time to terminate the autotests..."
echo "Current User Name: $USER"
read -s -p "Enter Password: " mypassword
echo -e "\n"
rm -fr $OPENAIR_DIR/cmake_targets/autotests/log
mkdir -p $OPENAIR_DIR/cmake_targets/autotests/log
if [ "$RUN_GROUP" -eq "1" ]; then
$OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -g "$TEST_CASE_GROUP" -p $mypassword >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log &
else
$OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -p $mypassword >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log &
fi
wait
else
echo_info "10. Bypassing the Tests ..."
fi
}
main "$@"
Reference in New Issue View Git Blame Copy Permalink