Guido Casati
5f261d4f4c
Prevent assertion in ngap_gNB_nas_uplink() due to uninitialized selected_plmn_identity: the selected_plmn_identity field was not being set during N2 handover, causing the assertion ((plmn->mnc_digit_length == 3) || (plmn->mnc_digit_length == 2)) to fail when processing subsequent NAS messages. The issue is that the Serving PLMN is not stored by RRC. During N2 mobility, RRC can get this info from GUAMI. When receiving the Handover Request the target gNB knows from GUAMI which serving PLMN is the AMF belonging to. In current design, allowed PLMNs are stored in rrc.configuration. The incoming PLMN needs to be validate against the PLMNs in the list, then stored in the UE context as Serving PLMN. This change adds PLMN validation when processing handover requests from the source gNB. The validation is needed because: - Target gNB must verify that the PLMN from the GUAMI in the handover request is allowed by its configuration before accepting the handover to prevent handover to unsupported PLMNs. - When PLMN validation fails, the target gNB now properly sends NGAP_HANDOVER_FAILURE - UE Context must store serving PLMN for later use
OpenAirInterface License
It is distributed under OAI Public License V1.1.
The license information is distributed under LICENSE file in the same directory.
Please see NOTICE file for third party software that is included in the sources.
Where to Start
- General overview of documentation
- The implemented features
- System Requirements for Using OAI Stack
- How to build
- How to run the modems
Not all information is available in a central place, and information for specific sub-systems might be available in the corresponding sub-directories. To find all READMEs, this command might be handy:
find . -iname "readme*"
RAN repository structure
The OpenAirInterface (OAI) software is composed of the following parts:
openairinterface5g
├── charts
├── ci-scripts : Meta-scripts used by the OSA CI process. Contains also configuration files used day-to-day by CI.
├── CMakeLists.txt : Top-level CMakeLists.txt for building
├── cmake_targets : Build utilities to compile (simulation, emulation and real-time platforms), and generated build files.
├── common : Some common OAI utilities, some other tools can be found at openair2/UTILS.
├── doc : Documentation
├── docker : Dockerfiles to build for Ubuntu and RHEL
├── executables : Top-level executable source files (gNB, eNB, ...)
├── maketags : Script to generate emacs tags.
├── nfapi : (n)FAPI code for MAC-PHY interface
├── openair1 : Layer 1 (3GPP LTE Rel-10/12 PHY, NR Rel-15 PHY)
├── openair2 : Layer 2 (3GPP LTE Rel-10 MAC/RLC/PDCP/RRC/X2AP, LTE Rel-14 M2AP, NR Rel-15+ MAC/RLC/PDCP/SDAP/RRC/X2AP/F1AP/E1AP), E2AP
├── openair3 : Layer 3 (3GPP LTE Rel-10 S1AP/GTP, NR Rel-15 NGAP/GTP)
├── openshift : OpenShift helm charts for some deployment options of OAI
├── radio : Drivers for various radios such as USRP, AW2S, RFsim, 7.2 FHI, ...
├── targets : Some configuration files; only historical relevance, and might be deleted in the future
└── tools : Tools for use by the developers/ci machines: code analysis and formatting
How to get support from the OAI Community
You can ask your question on the mailing lists.
Your email should contain below information:
- A clear subject in your email.
- For all the queries there should be [Query] in the subject of the email and for problems there should be [Problem].
- In case of a problem, add a small description.
- Do not share any photos unless you want to share a diagram.
- OAI gNB/DU/CU/CU-CP/CU-UP configuration file in
.confformat only. - Logs of OAI gNB/DU/CU/CU-CP/CU-UP in
.logor.txtformat only. - In case your question is related to performance, include a small description of the machine (Operating System, Kernel version, CPU, RAM and networking card) and diagram of your testing environment.
- Known/open issues are present on GitLab, so keep checking.
Always remember a structured email will help us understand your issues quickly.